Re: selftest: rtctest.c:290:alarm_wkalm_set:Expected -1 (-1) != rc (-1) : Test terminated by assertion

Alexandre Belloni
2023-03-13T20:42:22Z

Hello,

This honestly looks like an infrastructure issue. How loaded are your
workers when running this test?
Also, I'm not sure how good is the rtc emulation in qemu (which is a
good part of what is being tested here).

On 07/03/2023 12:47:50+0530, Naresh Kamboju wrote:
> kselftest: rtc built with clang-16 getting failed but passed with gcc-12
> build. Please find more details about test logs on clang-16 and gcc-12
> and steps to reproduce locally on your machine by using tuxrun.
>
> On the qemu-x86-64 clang builds it is intermittent failure;
> you could notice that from the test history link below.
>
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
>
> Test log:
> ----------
> Linux version 6.3.0-rc1-next-20230307 (tuxmake@tuxmake) (Debian clang
> version 16.0.0 (++20230228093516+60692a66ced6-1~exp1~20230228093525.41),
> Debian LLD 16.0.0) #1 SMP PREEMPT @1678159722
> ...
> kselftest: Running tests in rtc
> TAP version 13
> 1..1
> # selftests: rtc: rtctest
> # TAP version 13
> # 1..8
> # # Starting 8 tests from 1 test cases.
> # # RUN rtc.date_read ...
> # # rtctest.c:54:date_read:Current RTC date/time is 07/03/2023 03:55:04.
> # # OK rtc.date_read
> # ok 1 rtc.date_read
> # # RUN rtc.date_read_loop ...
> # # rtctest.c:96:date_read_loop:Continuously reading RTC time for 30s
> (with 11ms breaks after every read).
> # # rtctest.c:122:date_read_loop:Performed 2630 RTC time reads.
> # # OK rtc.date_read_loop
> # ok 2 rtc.date_read_loop
> # # RUN rtc.uie_read ...
> # # OK rtc.uie_read
> # ok 3 rtc.uie_read
> # # RUN rtc.uie_select ...
> # # OK rtc.uie_select
> # ok 4 rtc.uie_select
> # # RUN rtc.alarm_alm_set ...
> # # rtctest.c:222:alarm_alm_set:Alarm time now set to 03:55:44.
> # # rtctest.c:241:alarm_alm_set:data: 1a0
> # # OK rtc.alarm_alm_set
> # ok 5 rtc.alarm_alm_set
> # # RUN rtc.alarm_wkalm_set ...
> # # rtctest.c:284:alarm_wkalm_set:Alarm time now set to 07/03/2023 03:55:47.
> # # rtctest.c:290:alarm_wkalm_set:Expected -1 (-1) != rc (-1)
> # # alarm_wkalm_set: Test terminated by assertion
> # # FAIL rtc.alarm_wkalm_set
> # not ok 6 rtc.alarm_wkalm_set
> # # RUN rtc.alarm_alm_set_minute ...
> # # rtctest.c:332:alarm_alm_set_minute:Alarm time now set to 03:56:00.
> # # rtctest.c:351:alarm_alm_set_minute:data: 1a0
> # # OK rtc.alarm_alm_set_minute
> # ok 7 rtc.alarm_alm_set_minute
> # # RUN rtc.alarm_wkalm_set_minute ...
> # # rtctest.c:394:alarm_wkalm_set_minute:Alarm time now set to
> 07/03/2023 03:57:00.
> # # rtctest.c:400:alarm_wkalm_set_minute:Expected -1 (-1) != rc (-1)
> # # alarm_wkalm_set_minute: Test terminated by assertion
> # # FAIL rtc.alarm_wkalm_set_minute
> # not ok 8 rtc.alarm_wkalm_set_minute
> # # FAILED: 6 / 8 tests passed.
> # # Totals: pass:6 fail:2 xfail:0 xpass:0 skip:0 error:0
>
> Links,
>
> qemu-x86_64:
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230306/testrun/15287646/suite/kselftest-rtc/test/rtc_rtctest/details/
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230306/testrun/15287646/suite/kselftest-rtc/test/rtc_rtctest/log
>
> qemu-arm64:
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230307/testrun/15302349/suite/kselftest-rtc/test/rtc_rtctest/log
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230307/testrun/15302349/suite/kselftest-rtc/tests/
>
> Test history:
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230307/testrun/15302349/suite/kselftest-rtc/test/rtc_rtctest/history/
>
> Test log:
> ---------
> Linux version 6.3.0-rc1-next-20230307 (tuxmake@tuxmake)
> (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils
> for Debian) 2.40) #1 SMP PREEMPT @1678159736
> ...
> kselftest: Running tests in rtc
> TAP version 13
> 1..1
> # selftests: rtc: rtctest
> # TAP version 13
> # 1..8
> # # Starting 8 tests from 1 test cases.
> # # RUN rtc.date_read ...
> # # rtctest.c:52:date_read:Current RTC date/time is 07/03/2023 03:48:22.
> # # OK rtc.date_read
> # ok 1 rtc.date_read
> # # RUN rtc.date_read_loop ...
> # # rtctest.c:95:date_read_loop:Continuously reading RTC time for 30s
> (with 11ms breaks after every read).
> # # rtctest.c:122:date_read_loop:Performed 2670 RTC time reads.
> # # OK rtc.date_read_loop
> # ok 2 rtc.date_read_loop
> # # RUN rtc.uie_read ...
> # # OK rtc.uie_read
> # ok 3 rtc.uie_read
> # # RUN rtc.uie_select ...
> # # OK rtc.uie_select
> # ok 4 rtc.uie_select
> # # RUN rtc.alarm_alm_set ...
> # # rtctest.c:221:alarm_alm_set:Alarm time now set to 03:49:02.
> # # rtctest.c:241:alarm_alm_set:data: 1a0
> # # OK rtc.alarm_alm_set
> # ok 5 rtc.alarm_alm_set
> # # RUN rtc.alarm_wkalm_set ...
> # # rtctest.c:281:alarm_wkalm_set:Alarm time now set to 07/03/2023 03:49:05.
> # # OK rtc.alarm_wkalm_set
> # ok 6 rtc.alarm_wkalm_set
> # # RUN rtc.alarm_alm_set_minute ...
> # # rtctest.c:331:alarm_alm_set_minute:Alarm time now set to 03:50:00.
> <47>[ 106.383091] systemd-journald[98]: Sent WATCHDOG=1 notification.
> # # rtctest.c:351:alarm_alm_set_minute:data: 1a0
> # # OK rtc.alarm_alm_set_minute
> # ok 7 rtc.alarm_alm_set_minute
> # # RUN rtc.alarm_wkalm_set_minute ...
> # # rtctest.c:391:alarm_wkalm_set_minute:Alarm time now set to
> 07/03/2023 03:51:00.
> # # OK rtc.alarm_wkalm_set_minute
> # ok 8 rtc.alarm_wkalm_set_minute
> # # PASSED: 8 / 8 tests passed.
> # # Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0
> ok 1 selftests: rtc: rtctest
>
> Links,
> qemu-x86_64:
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230307/testrun/15303767/suite/kselftest-rtc/test/rtc_rtctest/details/
> qemu-arm64:
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230307/testrun/15302372/suite/kselftest-rtc/tests/
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230307/testrun/15302372/suite/kselftest-rtc/test/rtc_rtctest/log
>
> Steps to reproduce:
> --------------
>
> # To install tuxrun on your system globally:
> # sudo pip3 install -U tuxrun==0.37.2
> #
> # See https://tuxrun.org/ for complete documentation.
>
> tuxrun \
> --runtime podman \
> --device qemu-x86_64 \
> --boot-args rw \
> --kernel https://storage.tuxsuite.com/public/linaro/lkft/builds/2McWP6obiL1x51zgkgLXRAmI9Ei/bzImage
> \
> --modules https://storage.tuxsuite.com/public/linaro/lkft/builds/2McWP6obiL1x51zgkgLXRAmI9Ei/modules.tar.xz
> \
> --rootfs https://storage.tuxboot.com/debian/bookworm/amd64/rootfs.ext4.xz \
> --parameters SKIPFILE=skipfile-lkft.yaml \
> --parameters KSELFTEST=https://storage.tuxsuite.com/public/linaro/lkft/builds/2McWP6obiL1x51zgkgLXRAmI9Ei/kselftest.tar.xz
> \
> --image docker.io/lavasoftware/lava-dispatcher:2023.01.0020.gc1598238f \
> --tests kselftest-rtc \
> --timeouts boot=15
>
> --
> Linaro LKFT
> https://lkft.linaro.org

--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering