[PATCH 2/2] net: dsa: b53: mdio: add support for BCM53134

["Álvaro Fernández Rojas" <noltari@gmail.com>]

From: Paul Geurts <paul.geurts@prodrive-technologies.com>

Add support for the BCM53134 Ethernet switch in the existing b53 dsa driver.
BCM53134 is very similar to the BCM58XX series.

Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 53 +++++++++++++++++++++++++++++++-
 drivers/net/dsa/b53/b53_mdio.c   |  5 ++-
 drivers/net/dsa/b53/b53_priv.h   |  9 +++++-
 3 files changed, 64 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 1f9b251a5452..aaa0813e6f59 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1282,6 +1282,42 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 	if (is63xx(dev) && port >= B53_63XX_RGMII0)
 		b53_adjust_63xx_rgmii(ds, port, phydev->interface);
 
+	if (is53134(dev) && phy_interface_is_rgmii(phydev)) {
+		if (port == dev->imp_port)
+			off = B53_RGMII_CTRL_IMP;
+		else
+			off = B53_RGMII_CTRL_P(port);
+
+		/* Configure the port RGMII clock delay by DLL disabled and
+		 * tx_clk aligned timing (restoring to reset defaults)
+		 */
+		b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
+		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
+
+		/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
+		 * sure that we enable the port TX clock internal delay to
+		 * account for this internal delay that is inserted, otherwise
+		 * the switch won't be able to receive correctly.
+		 *
+		 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
+		 * any delay neither on transmission nor reception, so the
+		 * BCM53134 must also be configured accordingly to account for
+		 * the lack of delay and introduce
+		 *
+		 * The BCM53134 switch has its RX clock and TX clock control
+		 * swapped, hence the reason why we modify the TX clock path in
+		 * the "RGMII" case
+		 */
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+			rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
+		b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
+
+		dev_info(ds->dev, "Configured port %d for %s\n", port,
+			 phy_modes(phydev->interface));
+	}
+
 	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
 		if (port == dev->imp_port)
 			off = B53_RGMII_CTRL_IMP;
@@ -2613,6 +2649,20 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
 	},
+	{
+		.chip_id = BCM53134_DEVICE_ID,
+		.dev_name = "BCM53134",
+		.vlans = 4096,
+		.enabled_ports = 0x12f,
+		.imp_port = 8,
+		.cpu_port = B53_CPU_PORT,
+		.vta_regs = B53_VTA_REGS,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
 };
 
 static int b53_switch_init(struct b53_device *dev)
@@ -2671,7 +2721,7 @@ static int b53_switch_init(struct b53_device *dev)
 	dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
 
 	/* Include non standard CPU port built-in PHYs to be probed */
-	if (is539x(dev) || is531x5(dev)) {
+	if (is539x(dev) || is531x5(dev) || is53134(dev)) {
 		for (i = 0; i < dev->num_ports; i++) {
 			if (!(dev->ds->phys_mii_mask & BIT(i)) &&
 			    !b53_possible_cpu_port(dev->ds, i))
@@ -2790,6 +2840,7 @@ int b53_switch_detect(struct b53_device *dev)
 		case BCM53012_DEVICE_ID:
 		case BCM53018_DEVICE_ID:
 		case BCM53019_DEVICE_ID:
+		case BCM53134_DEVICE_ID:
 			dev->chip_id = id32;
 			break;
 		default:
diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c
index 6ddc03b58b28..8b422b298cd5 100644
--- a/drivers/net/dsa/b53/b53_mdio.c
+++ b/drivers/net/dsa/b53/b53_mdio.c
@@ -286,6 +286,7 @@ static const struct b53_io_ops b53_mdio_ops = {
 #define B53_BRCM_OUI_2	0x03625c00
 #define B53_BRCM_OUI_3	0x00406000
 #define B53_BRCM_OUI_4	0x01410c00
+#define B53_BRCM_OUI_5	0xae025000
 
 static int b53_mdio_probe(struct mdio_device *mdiodev)
 {
@@ -313,7 +314,8 @@ static int b53_mdio_probe(struct mdio_device *mdiodev)
 	if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
 	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
 	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_3 &&
-	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_4) {
+	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_4 &&
+	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_5) {
 		dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
 		return -ENODEV;
 	}
@@ -375,6 +377,7 @@ static const struct of_device_id b53_of_match[] = {
 	{ .compatible = "brcm,bcm53115" },
 	{ .compatible = "brcm,bcm53125" },
 	{ .compatible = "brcm,bcm53128" },
+	{ .compatible = "brcm,bcm53134" },
 	{ .compatible = "brcm,bcm5365" },
 	{ .compatible = "brcm,bcm5389" },
 	{ .compatible = "brcm,bcm5395" },
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index a689a6950189..7888be1fd23f 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -80,6 +80,7 @@ enum {
 	BCM583XX_DEVICE_ID = 0x58300,
 	BCM7445_DEVICE_ID = 0x7445,
 	BCM7278_DEVICE_ID = 0x7278,
+	BCM53134_DEVICE_ID = 0x5075,
 };
 
 struct b53_pcs {
@@ -215,7 +216,13 @@ static inline int is58xx(struct b53_device *dev)
 	return dev->chip_id == BCM58XX_DEVICE_ID ||
 		dev->chip_id == BCM583XX_DEVICE_ID ||
 		dev->chip_id == BCM7445_DEVICE_ID ||
-		dev->chip_id == BCM7278_DEVICE_ID;
+		dev->chip_id == BCM7278_DEVICE_ID ||
+		dev->chip_id == BCM53134_DEVICE_ID;
+}
+
+static inline int is53134(struct b53_device *dev)
+{
+	return dev->chip_id == BCM53134_DEVICE_ID;
 }
 
 #define B53_63XX_RGMII0	4
-- 
2.30.2