From: Chester Lin <clin@suse.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: "Chester Lin" <clin@suse.com>, "NXP S32 Linux Team" <s32@nxp.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Ghennadi Procopciuc" <Ghennadi.Procopciuc@oss.nxp.com>,
"Andrei Stefanescu" <andrei.stefanescu@nxp.com>,
"Radu Pirea" <radu-nicolae.pirea@nxp.com>,
"Andreas Färber" <afaerber@suse.de>,
"Matthias Brugger" <mbrugger@suse.com>
Subject: [PATCH v3 5/6] pinctrl: s32cc: Use generic struct data to describe pin function
Date: Thu, 23 Mar 2023 22:48:32 +0800 [thread overview]
Message-ID: <20230323144833.28562-6-clin@suse.com> (raw)
In-Reply-To: <20230323144833.28562-1-clin@suse.com>
Replace struct s32_pmx_func with generic struct pinfunction since they
have the same data fields.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
---
Changes in v3:
- Separate the generic pinfunction patch from [PATCH v2 4/4]
- Fix the data type declaration and remove unncessary type casting
developed in v2.
drivers/pinctrl/nxp/pinctrl-s32.h | 14 +-------------
drivers/pinctrl/nxp/pinctrl-s32cc.c | 18 +++++++++++-------
2 files changed, 12 insertions(+), 20 deletions(-)
diff --git a/drivers/pinctrl/nxp/pinctrl-s32.h b/drivers/pinctrl/nxp/pinctrl-s32.h
index 850cd668f406..2f7aecd462e4 100644
--- a/drivers/pinctrl/nxp/pinctrl-s32.h
+++ b/drivers/pinctrl/nxp/pinctrl-s32.h
@@ -24,18 +24,6 @@ struct s32_pin_group {
unsigned int *pin_sss;
};
-/**
- * struct s32_pmx_func - describes S32 pinmux functions
- * @name: the name of this specific function
- * @groups: corresponding pin groups
- * @num_groups: the number of groups
- */
-struct s32_pmx_func {
- const char *name;
- const char **groups;
- unsigned int num_groups;
-};
-
/**
* struct s32_pin_range - pin ID range for each memory region.
* @start: start pin ID
@@ -52,7 +40,7 @@ struct s32_pinctrl_soc_info {
unsigned int npins;
struct s32_pin_group *groups;
unsigned int ngroups;
- struct s32_pmx_func *functions;
+ struct pinfunction *functions;
unsigned int nfunctions;
unsigned int grp_index;
const struct s32_pin_range *mem_pin_ranges;
diff --git a/drivers/pinctrl/nxp/pinctrl-s32cc.c b/drivers/pinctrl/nxp/pinctrl-s32cc.c
index e65c88162d7f..8373468719b6 100644
--- a/drivers/pinctrl/nxp/pinctrl-s32cc.c
+++ b/drivers/pinctrl/nxp/pinctrl-s32cc.c
@@ -364,7 +364,7 @@ static int s32_pmx_get_groups(struct pinctrl_dev *pctldev,
const struct s32_pinctrl_soc_info *info = ipctl->info;
*groups = info->functions[selector].groups;
- *num_groups = info->functions[selector].num_groups;
+ *num_groups = info->functions[selector].ngroups;
return 0;
}
@@ -785,8 +785,9 @@ static int s32_pinctrl_parse_functions(struct device_node *np,
u32 index)
{
struct device_node *child;
- struct s32_pmx_func *func;
+ struct pinfunction *func;
struct s32_pin_group *grp;
+ const char **groups;
u32 i = 0;
int ret = 0;
@@ -796,18 +797,19 @@ static int s32_pinctrl_parse_functions(struct device_node *np,
/* Initialise function */
func->name = np->name;
- func->num_groups = of_get_child_count(np);
- if (func->num_groups == 0) {
+ func->ngroups = of_get_child_count(np);
+ if (func->ngroups == 0) {
dev_err(info->dev, "no groups defined in %pOF\n", np);
return -EINVAL;
}
- func->groups = devm_kcalloc(info->dev, func->num_groups,
+
+ groups = devm_kcalloc(info->dev, func->ngroups,
sizeof(*func->groups), GFP_KERNEL);
- if (!func->groups)
+ if (!groups)
return -ENOMEM;
for_each_child_of_node(np, child) {
- func->groups[i] = child->name;
+ groups[i] = child->name;
grp = &info->groups[info->grp_index++];
ret = s32_pinctrl_parse_groups(child, grp, info);
if (ret)
@@ -815,6 +817,8 @@ static int s32_pinctrl_parse_functions(struct device_node *np,
i++;
}
+ func->groups = groups;
+
return 0;
}
--
2.37.3
next prev parent reply other threads:[~2023-03-23 14:50 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-23 14:48 [PATCH v3 0/6] pinctrl: s32: driver improvements and generic struct use Chester Lin
2023-03-23 14:48 ` [PATCH v3 1/6] pinctrl: s32g2: use of_device_get_match_data() to get device data Chester Lin
2023-03-23 17:11 ` kernel test robot
2023-03-23 17:42 ` Chester Lin
2023-03-23 14:48 ` [PATCH v3 2/6] pinctrl: s32: refine error/return/config checks and simplify driver codes Chester Lin
2023-03-23 14:48 ` [PATCH v3 3/6] pinctrl: s32cc: refactor pin config parsing Chester Lin
2023-03-23 18:44 ` Andy Shevchenko
2023-03-23 14:48 ` [PATCH v3 4/6] pinctrl: s32cc: embed generic struct pingroup Chester Lin
2023-03-23 14:48 ` Chester Lin [this message]
2023-03-23 18:49 ` [PATCH v3 5/6] pinctrl: s32cc: Use generic struct data to describe pin function Andy Shevchenko
2023-03-23 14:48 ` [PATCH v3 6/6] pinctrl: s32: separate const device data from struct s32_pinctrl_soc_info Chester Lin
2023-03-23 18:50 ` Andy Shevchenko
2023-03-24 7:45 ` Chester Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230323144833.28562-6-clin@suse.com \
--to=clin@suse.com \
--cc=Ghennadi.Procopciuc@oss.nxp.com \
--cc=afaerber@suse.de \
--cc=andrei.stefanescu@nxp.com \
--cc=andy.shevchenko@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mbrugger@suse.com \
--cc=radu-nicolae.pirea@nxp.com \
--cc=s32@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox