From: Cai Huoqing <cai.huoqing@linux.dev>
To: cai.huoqing@linux.dev
Cc: Sanjay R Mehta <sanju.mehta@amd.com>,
Shyam Sundar S K <Shyam-sundar.S-k@amd.com>,
Jon Mason <jdmason@kudzu.us>, Dave Jiang <dave.jiang@intel.com>,
Allen Hubbe <allenbh@gmail.com>, Frank Li <Frank.Li@nxp.com>,
ntb@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/3] ntb: epf: Remove redundant pci_clear_master
Date: Fri, 24 Mar 2023 09:32:19 +0800 [thread overview]
Message-ID: <20230324013224.5963-2-cai.huoqing@linux.dev> (raw)
In-Reply-To: <20230324013224.5963-1-cai.huoqing@linux.dev>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
---
v1->v2: Fix the removed label-err_dma_mask
v1 link:
https://lore.kernel.org/lkml/20230323115336.12986-2-cai.huoqing@linux.dev/
drivers/ntb/hw/epf/ntb_hw_epf.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/ntb/hw/epf/ntb_hw_epf.c b/drivers/ntb/hw/epf/ntb_hw_epf.c
index 3ece49cb18ff..b640aa0bf45e 100644
--- a/drivers/ntb/hw/epf/ntb_hw_epf.c
+++ b/drivers/ntb/hw/epf/ntb_hw_epf.c
@@ -591,7 +591,7 @@ static int ntb_epf_init_pci(struct ntb_epf_dev *ndev,
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(dev, "Cannot set DMA mask\n");
- goto err_dma_mask;
+ goto err_pci_regions;
}
dev_warn(&pdev->dev, "Cannot DMA highmem\n");
}
@@ -599,14 +599,14 @@ static int ntb_epf_init_pci(struct ntb_epf_dev *ndev,
ndev->ctrl_reg = pci_iomap(pdev, ndev->ctrl_reg_bar, 0);
if (!ndev->ctrl_reg) {
ret = -EIO;
- goto err_dma_mask;
+ goto err_pci_regions;
}
if (ndev->peer_spad_reg_bar) {
ndev->peer_spad_reg = pci_iomap(pdev, ndev->peer_spad_reg_bar, 0);
if (!ndev->peer_spad_reg) {
ret = -EIO;
- goto err_dma_mask;
+ goto err_pci_regions;
}
} else {
spad_sz = 4 * readl(ndev->ctrl_reg + NTB_EPF_SPAD_COUNT);
@@ -617,14 +617,11 @@ static int ntb_epf_init_pci(struct ntb_epf_dev *ndev,
ndev->db_reg = pci_iomap(pdev, ndev->db_reg_bar, 0);
if (!ndev->db_reg) {
ret = -EIO;
- goto err_dma_mask;
+ goto err_pci_regions;
}
return 0;
-err_dma_mask:
- pci_clear_master(pdev);
-
err_pci_regions:
pci_disable_device(pdev);
@@ -642,7 +639,6 @@ static void ntb_epf_deinit_pci(struct ntb_epf_dev *ndev)
pci_iounmap(pdev, ndev->peer_spad_reg);
pci_iounmap(pdev, ndev->db_reg);
- pci_clear_master(pdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
--
2.34.1
next prev parent reply other threads:[~2023-03-24 1:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-24 1:32 [PATCH v2 1/3] ntb_hw_amd: Remove redundant pci_clear_master Cai Huoqing
2023-03-24 1:32 ` Cai Huoqing [this message]
2023-03-24 1:32 ` [PATCH v2 3/3] ntb: intel: " Cai Huoqing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230324013224.5963-2-cai.huoqing@linux.dev \
--to=cai.huoqing@linux.dev \
--cc=Frank.Li@nxp.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=allenbh@gmail.com \
--cc=dave.jiang@intel.com \
--cc=jdmason@kudzu.us \
--cc=linux-kernel@vger.kernel.org \
--cc=ntb@lists.linux.dev \
--cc=sanju.mehta@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox