Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Christophe,

christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:

> FMC2 controller does not support EDO mode (timings mode 4 and 5).
> 
> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
> ---
>  drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> index 5d627048c420..3abb63d00a0b 100644
> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> @@ -1531,6 +1531,9 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
>  	if (IS_ERR(sdrt))
>  		return PTR_ERR(sdrt);
>  
> +	if (sdrt->tRC_min < 30000)

When introducing NV-DDR support we as well added a timings.mode field,
perhaps you could use it?

> +		return -EOPNOTSUPP;
> +
>  	if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
>  		return 0;
>  


Thanks,
Miquèl