[PATCH v8 0/3] Add single core R5F IPC for AM62 SoC family

[Devarsh Thakkar <devarsht@ti.com>]

AM62 SoC family don't have a multicore R5F cluster,                             
instead they have a single core R5F.                                            
This enables IPC support with single core R5F for AM62                          
family of SoCs.

While at it, also simplify the cluster mode setting usage
by using soc_data specific checks only at probe.

Devarsh Thakkar (3):
  remoteproc: k3-r5: Simplify cluster mode setting usage
  dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family
  remoteproc: k3-r5: Use separate compatible string for TI AM62x SoC
    family

 .../bindings/remoteproc/ti,k3-r5f-rproc.yaml  |  76 ++++++++---
 drivers/remoteproc/ti_k3_r5_remoteproc.c      | 127 ++++++++++++------
 2 files changed, 138 insertions(+), 65 deletions(-)
---
V2:                                                                             
  - dt-bindings: Avoid acronyms, use "Device Manager" instead of "DM"           
V3:                                                                             
  - dt-bindings: Use separate if block for each compatible for                  
    ti,cluster-mode property                                                    
  - dt-bindings: Rearrange compatibles as per alphabatical order                
V4:                                                                             
  - dt-bindings: Place each enum in separate line in allOf                      
V5:                                                                             
  - No change (fixing typo in email address)                                    
V6:                                                                             
  - dt-bindings: Remove reviewed-by due to new modifications to use             
    cluster-mode=3                                                              
    Introduce Simplify cluster-mode setting preamble patch per review           
comments                                                                        
  - Use CLUSTER_MODE_SINGLECORE for AM62x                                       
  - Set PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE for single core.                      
V7:                                                                             
  - Override to appropriate cluster-mode per firmware status flag               
    without checking soc_data                                                   
  - Set appropriate mode as default if not provided in DT                       
  - Check mode validity against SoC data during probe                           
  - Rebase on top of 6.3 linux-next                                             
V8:                                                                             
  - Avoid using soc_data while overriding cluster mode for IPC-only mode  
-- 
2.34.1