[PATCH] dt-bindings: thermal: Drop unneeded quotes

[Rob Herring <robh@kernel.org>]

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/thermal/amlogic,thermal.yaml          | 2 +-
 Documentation/devicetree/bindings/thermal/imx-thermal.yaml    | 4 ++--
 Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml  | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index 999c6b365f1d..20f8f9b3b971 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -30,7 +30,7 @@ properties:
 
   amlogic,ao-secure:
     description: phandle to the ao-secure syscon
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   '#thermal-sensor-cells':
     const: 0
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
index b22c8b59d5c7..fe599e443eaf 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -40,11 +40,11 @@ properties:
       - const: temp_grade
 
   fsl,tempmon:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: Phandle to anatop system controller node.
 
   fsl,tempmon-data:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Deprecated property, phandle pointer to fuse controller that contains
       TEMPMON calibration data, e.g. OCOTP on imx6q. The details about
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
index f09e8723ca2b..145744027234 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
@@ -29,14 +29,14 @@ properties:
     maxItems: 1
 
   fsl,tmu-range:
-    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       The values to be programmed into TTRnCR, as specified by the SoC
       reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
     maxItems: 4
 
   fsl,tmu-calibration:
-    $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     description: |
       A list of cell pairs containing temperature calibration data, as
       specified by the SoC reference manual. The first cell of each pair
-- 
2.39.2