[PATCH v2 6/7] arm64: dts: qcom: sa8775p: add the GPU clock controller node

Bartosz Golaszewski
2023-04-06T20:08:29Z

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add the GPUCC node for sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 9ab630c7d81b..f799cb5abb87 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -591,6 +591,20 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};

+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sa8775p-gpucc";
+ reg = <0x0 0x03d90000 0x0 0xa000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sa8775p-pdc", "qcom,pdc";
reg = <0x0 0x0b220000 0x0 0x30000>,
--
2.37.2