From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Terry Bowman <terry.bowman@amd.com>, <alison.schofield@intel.com>,
<vishal.l.verma@intel.com>, <ira.weiny@intel.com>,
<bwidawsk@kernel.org>, <dan.j.williams@intel.com>,
<dave.jiang@intel.com>, <linux-cxl@vger.kernel.org>,
<rrichter@amd.com>, <linux-kernel@vger.kernel.org>,
<bhelgaas@google.com>, "Oliver O'Halloran" <oohall@gmail.com>,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
<linuxppc-dev@lists.ozlabs.org>, <linux-pci@vger.kernel.org>
Subject: Re: [PATCH v3 6/6] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
Date: Thu, 13 Apr 2023 18:01:22 +0100 [thread overview]
Message-ID: <20230413180122.00007471@Huawei.com> (raw)
In-Reply-To: <20230412212901.GA81099@bhelgaas>
On Wed, 12 Apr 2023 16:29:01 -0500
Bjorn Helgaas <helgaas@kernel.org> wrote:
> On Tue, Apr 11, 2023 at 01:03:02PM -0500, Terry Bowman wrote:
> > From: Robert Richter <rrichter@amd.com>
> >
> > RCEC AER corrected and uncorrectable internal errors (CIE/UIE) are
> > disabled by default.
>
> "Disabled by default" just means "the power-up state of CIE/UIC is
> that they are masked", right? It doesn't mean that Linux normally
> masks them.
>
> > [1][2] Enable them to receive CXL downstream port
> > errors of a Restricted CXL Host (RCH).
> >
> > [1] CXL 3.0 Spec, 12.2.1.1 - RCH Downstream Port Detected Errors
> > [2] PCIe Base Spec 6.0, 7.8.4.3 Uncorrectable Error Mask Register,
> > 7.8.4.6 Correctable Error Mask Register
> >
> > Co-developed-by: Terry Bowman <terry.bowman@amd.com>
> > Signed-off-by: Robert Richter <rrichter@amd.com>
> > Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> > Cc: "Oliver O'Halloran" <oohall@gmail.com>
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
> > Cc: linuxppc-dev@lists.ozlabs.org
> > Cc: linux-pci@vger.kernel.org
> > ---
> > drivers/pci/pcie/aer.c | 73 ++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 73 insertions(+)
> >
> > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> > index 171a08fd8ebd..3973c731e11d 100644
> > --- a/drivers/pci/pcie/aer.c
> > +++ b/drivers/pci/pcie/aer.c
> > @@ -1000,7 +1000,79 @@ static void cxl_handle_error(struct pci_dev *dev, struct aer_err_info *info)
> > pcie_walk_rcec(dev, cxl_handle_error_iter, info);
> > }
> >
> > +static bool cxl_error_is_native(struct pci_dev *dev)
> > +{
> > + struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> > +
> > + if (pcie_ports_native)
> > + return true;
> > +
> > + return host->native_aer && host->native_cxl_error;
> > +}
> > +
> > +static int handles_cxl_error_iter(struct pci_dev *dev, void *data)
> > +{
> > + int *handles_cxl = data;
> > +
> > + *handles_cxl = is_cxl_mem_dev(dev) && cxl_error_is_native(dev);
> > +
> > + return *handles_cxl;
> > +}
> > +
> > +static bool handles_cxl_errors(struct pci_dev *rcec)
> > +{
> > + int handles_cxl = 0;
> > +
> > + if (!rcec->aer_cap)
> > + return false;
> > +
> > + if (pci_pcie_type(rcec) == PCI_EXP_TYPE_RC_EC)
> > + pcie_walk_rcec(rcec, handles_cxl_error_iter, &handles_cxl);
> > +
> > + return !!handles_cxl;
> > +}
> > +
> > +static int __cxl_unmask_internal_errors(struct pci_dev *rcec)
> > +{
> > + int aer, rc;
> > + u32 mask;
> > +
> > + /*
> > + * Internal errors are masked by default, unmask RCEC's here
> > + * PCI6.0 7.8.4.3 Uncorrectable Error Mask Register (Offset 08h)
> > + * PCI6.0 7.8.4.6 Correctable Error Mask Register (Offset 14h)
> > + */
>
> Unmasking internal errors doesn't have anything specific to do with
> CXL, so I don't think it should have "cxl" in the function name.
> Maybe something like "pci_aer_unmask_internal_errors()".
This reminds me. Not sure we resolved earlier discussion on changing
the system wide policy to turn these on
https://lore.kernel.org/linux-cxl/20221229172731.GA611562@bhelgaas/
which needs pretty much the same thing.
Ira, I think you were picking this one up?
https://lore.kernel.org/linux-cxl/63e5fb533f304_13244829412@iweiny-mobl.notmuch/
Thanks,
Jonathan
>
> This also has nothing special to do with RCECs, so I think we should
> refer to the device as "dev" as is typical in this file.
>
> I think this needs to check pcie_aer_is_native() as is done by
> pci_aer_clear_nonfatal_status() and other functions that write the AER
> Capability.
>
> With the exception of this function, this patch looks like all CXL
> code that maybe could be with other CXL code. Would require making
> pcie_walk_rcec() available outside drivers/pci, I guess.
>
> > + aer = rcec->aer_cap;
> > + rc = pci_read_config_dword(rcec, aer + PCI_ERR_UNCOR_MASK, &mask);
> > + if (rc)
> > + return rc;
> > + mask &= ~PCI_ERR_UNC_INTN;
> > + rc = pci_write_config_dword(rcec, aer + PCI_ERR_UNCOR_MASK, mask);
> > + if (rc)
> > + return rc;
> > +
> > + rc = pci_read_config_dword(rcec, aer + PCI_ERR_COR_MASK, &mask);
> > + if (rc)
> > + return rc;
> > + mask &= ~PCI_ERR_COR_INTERNAL;
> > + rc = pci_write_config_dword(rcec, aer + PCI_ERR_COR_MASK, mask);
> > +
> > + return rc;
> > +}
> > +
> > +static void cxl_unmask_internal_errors(struct pci_dev *rcec)
> > +{
> > + if (!handles_cxl_errors(rcec))
> > + return;
> > +
> > + if (__cxl_unmask_internal_errors(rcec))
> > + dev_err(&rcec->dev, "cxl: Failed to unmask internal errors");
> > + else
> > + dev_dbg(&rcec->dev, "cxl: Internal errors unmasked");
> > +}
> > +
> > #else
> > +static inline void cxl_unmask_internal_errors(struct pci_dev *dev) { }
> > static inline void cxl_handle_error(struct pci_dev *dev,
> > struct aer_err_info *info) { }
> > #endif
> > @@ -1397,6 +1469,7 @@ static int aer_probe(struct pcie_device *dev)
> > return status;
> > }
> >
> > + cxl_unmask_internal_errors(port);
> > aer_enable_rootport(rpc);
> > pci_info(port, "enabled with IRQ %d\n", dev->irq);
> > return 0;
> > --
> > 2.34.1
> >
next prev parent reply other threads:[~2023-04-13 17:01 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-11 18:02 [PATCH v3 0/6] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-04-11 18:02 ` [PATCH v3 1/6] cxl/pci: Add RCH downstream port AER and RAS register discovery Terry Bowman
2023-04-13 15:30 ` Jonathan Cameron
2023-04-13 19:13 ` Terry Bowman
2023-04-14 11:47 ` Jonathan Cameron
2023-04-14 11:51 ` Robert Richter
2023-04-17 23:00 ` Dan Williams
2023-04-18 15:59 ` Terry Bowman
2023-04-27 13:52 ` Robert Richter
2023-04-11 18:02 ` [PATCH v3 2/6] efi/cper: Export cper_mem_err_unpack() for use by modules Terry Bowman
2023-04-12 11:04 ` Ard Biesheuvel
2023-04-13 16:08 ` Jonathan Cameron
2023-04-13 19:40 ` Terry Bowman
2023-04-14 11:48 ` Jonathan Cameron
2023-04-14 12:44 ` Robert Richter
[not found] ` <aba5d2ee-f451-145c-81c2-72595129483b@amd.com>
2023-04-14 15:17 ` Terry Bowman
2023-04-17 23:08 ` Dan Williams
2023-04-11 18:02 ` [PATCH v3 3/6] PCI/AER: Export cper_print_aer() " Terry Bowman
2023-04-13 16:13 ` Jonathan Cameron
2023-04-17 23:11 ` Dan Williams
2023-04-11 18:03 ` [PATCH v3 4/6] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-04-12 1:32 ` kernel test robot
2023-04-12 3:04 ` kernel test robot
2023-04-13 16:50 ` Jonathan Cameron
2023-04-14 16:36 ` Terry Bowman
2023-04-17 16:56 ` Jonathan Cameron
2023-04-18 0:06 ` Dan Williams
2023-04-24 18:39 ` Terry Bowman
2023-04-11 18:03 ` [PATCH v3 5/6] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-04-12 22:02 ` Bjorn Helgaas
2023-04-13 11:40 ` Robert Richter
2023-04-14 21:32 ` Bjorn Helgaas
2023-04-17 22:00 ` Robert Richter
2023-04-19 14:17 ` Robert Richter
2023-04-14 12:19 ` Jonathan Cameron
2023-04-14 14:35 ` Robert Richter
2023-04-17 16:54 ` Jonathan Cameron
2023-04-17 20:36 ` Robert Richter
2023-04-18 1:01 ` Dan Williams
2023-04-19 13:30 ` Robert Richter
2023-04-11 18:03 ` [PATCH v3 6/6] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-04-12 21:29 ` Bjorn Helgaas
2023-04-13 13:38 ` Robert Richter
2023-04-13 17:05 ` Jonathan Cameron
2023-04-14 11:58 ` Robert Richter
2023-04-14 21:49 ` Bjorn Helgaas
2023-04-13 17:01 ` Jonathan Cameron [this message]
2023-04-13 22:52 ` Ira Weiny
2023-04-14 11:21 ` Robert Richter
2023-04-14 11:55 ` Jonathan Cameron
2023-04-14 14:47 ` Robert Richter
2023-04-18 2:37 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230413180122.00007471@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=helgaas@kernel.org \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mahesh@linux.ibm.com \
--cc=oohall@gmail.com \
--cc=rrichter@amd.com \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox