[PATCH] clocksource: ti: Use of_property_read_bool() for boolean properties

[PATCH] clocksource: ti: Use of_property_read_bool() for boolean properties

[Rob Herring]

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
---
 drivers/clocksource/timer-ti-dm-systimer.c | 4 ++--
 drivers/clocksource/timer-ti-dm.c          | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 632523c1232f..efa5f55a65f8 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -586,7 +586,7 @@ static int __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
 	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
 
 	pr_info("TI gptimer %s: %s%lu Hz at %pOF\n",
-		name, of_find_property(np, "ti,timer-alwon", NULL) ?
+		name, of_property_read_bool(np, "ti,timer-alwon") ?
 		"always-on " : "", t->rate, np->parent);
 
 	return 0;
@@ -787,7 +787,7 @@ static int __init dmtimer_clocksource_init(struct device_node *np)
 		       t->base + t->ctrl);
 
 	pr_info("TI gptimer clocksource: %s%pOF\n",
-		of_find_property(np, "ti,timer-alwon", NULL) ?
+		of_property_read_bool(np, "ti,timer-alwon") ?
 		"always-on " : "", np->parent);
 
 	if (!dmtimer_sched_clock_counter) {
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index b24b903a8822..7031aa1bfdcb 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -1104,13 +1104,13 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, timer);
 
 	if (dev->of_node) {
-		if (of_find_property(dev->of_node, "ti,timer-alwon", NULL))
+		if (of_property_read_bool(dev->of_node, "ti,timer-alwon"))
 			timer->capability |= OMAP_TIMER_ALWON;
-		if (of_find_property(dev->of_node, "ti,timer-dsp", NULL))
+		if (of_property_read_bool(dev->of_node, "ti,timer-dsp"))
 			timer->capability |= OMAP_TIMER_HAS_DSP_IRQ;
-		if (of_find_property(dev->of_node, "ti,timer-pwm", NULL))
+		if (of_property_read_bool(dev->of_node, "ti,timer-pwm"))
 			timer->capability |= OMAP_TIMER_HAS_PWM;
-		if (of_find_property(dev->of_node, "ti,timer-secure", NULL))
+		if (of_property_read_bool(dev->of_node, "ti,timer-secure"))
 			timer->capability |= OMAP_TIMER_SECURE;
 	} else {
 		timer->id = pdev->id;
-- 
2.39.2

Re: [PATCH] clocksource: ti: Use of_property_read_bool() for boolean properties

[Rob Herring]

On Fri, Mar 10, 2023 at 08:47:01AM -0600, Rob Herring wrote:
> It is preferred to use typed property access functions (i.e.
> of_property_read_<type> functions) rather than low-level
> of_get_property/of_find_property functions for reading properties.
> Convert reading boolean properties to to of_property_read_bool().
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  drivers/clocksource/timer-ti-dm-systimer.c | 4 ++--
>  drivers/clocksource/timer-ti-dm.c          | 8 ++++----
>  2 files changed, 6 insertions(+), 6 deletions(-)

Ping!

> 
> diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
> index 632523c1232f..efa5f55a65f8 100644
> --- a/drivers/clocksource/timer-ti-dm-systimer.c
> +++ b/drivers/clocksource/timer-ti-dm-systimer.c
> @@ -586,7 +586,7 @@ static int __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
>  	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
>  
>  	pr_info("TI gptimer %s: %s%lu Hz at %pOF\n",
> -		name, of_find_property(np, "ti,timer-alwon", NULL) ?
> +		name, of_property_read_bool(np, "ti,timer-alwon") ?
>  		"always-on " : "", t->rate, np->parent);
>  
>  	return 0;
> @@ -787,7 +787,7 @@ static int __init dmtimer_clocksource_init(struct device_node *np)
>  		       t->base + t->ctrl);
>  
>  	pr_info("TI gptimer clocksource: %s%pOF\n",
> -		of_find_property(np, "ti,timer-alwon", NULL) ?
> +		of_property_read_bool(np, "ti,timer-alwon") ?
>  		"always-on " : "", np->parent);
>  
>  	if (!dmtimer_sched_clock_counter) {
> diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
> index b24b903a8822..7031aa1bfdcb 100644
> --- a/drivers/clocksource/timer-ti-dm.c
> +++ b/drivers/clocksource/timer-ti-dm.c
> @@ -1104,13 +1104,13 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, timer);
>  
>  	if (dev->of_node) {
> -		if (of_find_property(dev->of_node, "ti,timer-alwon", NULL))
> +		if (of_property_read_bool(dev->of_node, "ti,timer-alwon"))
>  			timer->capability |= OMAP_TIMER_ALWON;
> -		if (of_find_property(dev->of_node, "ti,timer-dsp", NULL))
> +		if (of_property_read_bool(dev->of_node, "ti,timer-dsp"))
>  			timer->capability |= OMAP_TIMER_HAS_DSP_IRQ;
> -		if (of_find_property(dev->of_node, "ti,timer-pwm", NULL))
> +		if (of_property_read_bool(dev->of_node, "ti,timer-pwm"))
>  			timer->capability |= OMAP_TIMER_HAS_PWM;
> -		if (of_find_property(dev->of_node, "ti,timer-secure", NULL))
> +		if (of_property_read_bool(dev->of_node, "ti,timer-secure"))
>  			timer->capability |= OMAP_TIMER_SECURE;
>  	} else {
>  		timer->id = pdev->id;
> -- 
> 2.39.2
> 

Re: [PATCH] clocksource: ti: Use of_property_read_bool() for boolean properties

[Daniel Lezcano]

On 18/04/2023 18:24, Rob Herring wrote:
> On Fri, Mar 10, 2023 at 08:47:01AM -0600, Rob Herring wrote:
>> It is preferred to use typed property access functions (i.e.
>> of_property_read_<type> functions) rather than low-level
>> of_get_property/of_find_property functions for reading properties.
>> Convert reading boolean properties to to of_property_read_bool().
>>
>> Signed-off-by: Rob Herring <robh@kernel.org>
>> ---
>>   drivers/clocksource/timer-ti-dm-systimer.c | 4 ++--
>>   drivers/clocksource/timer-ti-dm.c          | 8 ++++----
>>   2 files changed, 6 insertions(+), 6 deletions(-)
> 
> Ping!

Applied, thanks for heads up


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[tip: timers/core] clocksource/drivers/ti: Use of_property_read_bool() for boolean properties

[tip-bot2 for Rob Herring]

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     87dd04f9b1a37a92ebbea5eb46e4941551d3547e
Gitweb:        https://git.kernel.org/tip/87dd04f9b1a37a92ebbea5eb46e4941551d3547e
Author:        Rob Herring <robh@kernel.org>
AuthorDate:    Fri, 10 Mar 2023 08:47:01 -06:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Mon, 24 Apr 2023 16:56:14 +02:00

clocksource/drivers/ti: Use of_property_read_bool() for boolean properties

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230310144702.1541660-1-robh@kernel.org
---
 drivers/clocksource/timer-ti-dm-systimer.c | 4 ++--
 drivers/clocksource/timer-ti-dm.c          | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 4fa68f6..c2dcd8d 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -584,7 +584,7 @@ static int __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
 	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
 
 	pr_info("TI gptimer %s: %s%lu Hz at %pOF\n",
-		name, of_find_property(np, "ti,timer-alwon", NULL) ?
+		name, of_property_read_bool(np, "ti,timer-alwon") ?
 		"always-on " : "", t->rate, np->parent);
 
 	return 0;
@@ -785,7 +785,7 @@ static int __init dmtimer_clocksource_init(struct device_node *np)
 		       t->base + t->ctrl);
 
 	pr_info("TI gptimer clocksource: %s%pOF\n",
-		of_find_property(np, "ti,timer-alwon", NULL) ?
+		of_property_read_bool(np, "ti,timer-alwon") ?
 		"always-on " : "", np->parent);
 
 	if (!dmtimer_sched_clock_counter) {
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index ab7a6ca..1d3ad51 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -1104,13 +1104,13 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, timer);
 
 	if (dev->of_node) {
-		if (of_find_property(dev->of_node, "ti,timer-alwon", NULL))
+		if (of_property_read_bool(dev->of_node, "ti,timer-alwon"))
 			timer->capability |= OMAP_TIMER_ALWON;
-		if (of_find_property(dev->of_node, "ti,timer-dsp", NULL))
+		if (of_property_read_bool(dev->of_node, "ti,timer-dsp"))
 			timer->capability |= OMAP_TIMER_HAS_DSP_IRQ;
-		if (of_find_property(dev->of_node, "ti,timer-pwm", NULL))
+		if (of_property_read_bool(dev->of_node, "ti,timer-pwm"))
 			timer->capability |= OMAP_TIMER_HAS_PWM;
-		if (of_find_property(dev->of_node, "ti,timer-secure", NULL))
+		if (of_property_read_bool(dev->of_node, "ti,timer-secure"))
 			timer->capability |= OMAP_TIMER_SECURE;
 	} else {
 		timer->id = pdev->id;