From: kernel test robot <lkp@intel.com>
To: Andreas Klinger <ak@it-klinger.de>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org
Cc: oe-kbuild-all@lists.linux.dev,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Angel Iglesias <ang.iglesiasg@gmail.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor
Date: Fri, 21 Apr 2023 06:04:51 +0800 [thread overview]
Message-ID: <202304210512.5qdqDRgd-lkp@intel.com> (raw)
In-Reply-To: <ZEGZ7VMrqaPNzhwj@arbad>
Hi Andreas,
kernel test robot noticed the following build warnings:
[auto build test WARNING on e0ee50101346ca9cef52da75e3fb4380c27c042a]
url: https://github.com/intel-lab-lkp/linux/commits/Andreas-Klinger/dt-bindings-iio-pressure-Support-Honeywell-mprls0025pa-sensor/20230421-040254
base: e0ee50101346ca9cef52da75e3fb4380c27c042a
patch link: https://lore.kernel.org/r/ZEGZ7VMrqaPNzhwj%40arbad
patch subject: [PATCH v3 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor
config: sparc-allyesconfig (https://download.01.org/0day-ci/archive/20230421/202304210512.5qdqDRgd-lkp@intel.com/config)
compiler: sparc64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/3d6a7eae49611392fb6f7563dcb71b74f12a0a78
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Andreas-Klinger/dt-bindings-iio-pressure-Support-Honeywell-mprls0025pa-sensor/20230421-040254
git checkout 3d6a7eae49611392fb6f7563dcb71b74f12a0a78
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sparc olddefconfig
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sparc SHELL=/bin/bash drivers/iio/pressure/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202304210512.5qdqDRgd-lkp@intel.com/
All warnings (new ones prefixed by >>):
In file included from include/linux/device.h:15,
from include/linux/acpi.h:15,
from include/linux/i2c.h:13,
from drivers/iio/pressure/mprls0025pa.c:17:
drivers/iio/pressure/mprls0025pa.c: In function 'mpr_read_pressure':
>> drivers/iio/pressure/mprls0025pa.c:169:30: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=]
169 | dev_err(dev, "received size doesn't fit - ret: %d / %d\n", ret, sizeof(wdata));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap'
110 | _p_func(dev, fmt, ##__VA_ARGS__); \
| ^~~
include/linux/dev_printk.h:144:56: note: in expansion of macro 'dev_fmt'
144 | dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~
drivers/iio/pressure/mprls0025pa.c:169:17: note: in expansion of macro 'dev_err'
169 | dev_err(dev, "received size doesn't fit - ret: %d / %d\n", ret, sizeof(wdata));
| ^~~~~~~
drivers/iio/pressure/mprls0025pa.c:169:70: note: format string is defined here
169 | dev_err(dev, "received size doesn't fit - ret: %d / %d\n", ret, sizeof(wdata));
| ~^
| |
| int
| %ld
drivers/iio/pressure/mprls0025pa.c:208:30: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=]
208 | dev_err(dev, "received size doesn't fit - ret: %d / %d\n", ret, sizeof(buf));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap'
110 | _p_func(dev, fmt, ##__VA_ARGS__); \
| ^~~
include/linux/dev_printk.h:144:56: note: in expansion of macro 'dev_fmt'
144 | dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~
drivers/iio/pressure/mprls0025pa.c:208:17: note: in expansion of macro 'dev_err'
208 | dev_err(dev, "received size doesn't fit - ret: %d / %d\n", ret, sizeof(buf));
| ^~~~~~~
drivers/iio/pressure/mprls0025pa.c:208:70: note: format string is defined here
208 | dev_err(dev, "received size doesn't fit - ret: %d / %d\n", ret, sizeof(buf));
| ~^
| |
| int
| %ld
vim +169 drivers/iio/pressure/mprls0025pa.c
> 17 #include <linux/i2c.h>
18 #include <linux/module.h>
19 #include <linux/mod_devicetable.h>
20 #include <linux/device.h>
21 #include <linux/gpio/consumer.h>
22 #include <linux/regulator/consumer.h>
23 #include <linux/math64.h>
24
25 #include <asm/unaligned.h>
26
27 #include <linux/iio/iio.h>
28 #include <linux/iio/buffer.h>
29 #include <linux/iio/triggered_buffer.h>
30 #include <linux/iio/trigger_consumer.h>
31
32 /* bits in i2c status byte */
33 #define MPR_I2C_POWER BIT(6) /* device is powered */
34 #define MPR_I2C_BUSY BIT(5) /* device is busy */
35 #define MPR_I2C_MEMORY BIT(2) /* integrity test passed */
36 #define MPR_I2C_MATH BIT(0) /* internal math saturation */
37
38 #define MPR_NANO_PART 1000000000LL
39
40 /*
41 * _INPUT interface:
42 * Calculation formular from the datasheet:
43 * pressure = (press_cnt - outputmin) * scale + pmin
44 * with:
45 * * pressure - measured pressure in Pascal
46 * * press_cnt - raw value read from sensor
47 * * pmin - minimum pressure range value of sensor (data->pmin)
48 * * pmax - maximum pressure range value of sensor (data->pmax)
49 * * outputmin - minimum numerical range raw value delivered by sensor (MPR_OUT_MIN)
50 * * outputmax - maximum numerical range raw value delivered by sensor (MPR_OUT_MAX)
51 * * scale - (pmax - pmin) / (outputmax - outputmin)
52 *
53 * _RAW interface:
54 * pressure = (raw + offset) * scale
55 * --> need to adjust offset for fitting into _RAW interface
56 * Values for _RAW interface:
57 * * raw - press_cnt
58 * * scale - (pmax - pmin) / (outputmax - outputmin)
59 * * offset - (-1 * outputmin) - pmin / scale
60 * note: With all sensors from the datasheet pmin = 0 which reduces the offset to
61 * (-1 * outputmin)
62 */
63
64 /*
65 * transfer function A: 10% to 90% of 2^24
66 * transfer function B: 2.5% to 22.5% of 2^24
67 * transfer function C: 20% to 80% of 2^24
68 */
69 enum mpr_func_id {
70 MPR_FUNCTION_A,
71 MPR_FUNCTION_B,
72 MPR_FUNCTION_C,
73 };
74
75 struct mpr_func_spec {
76 u32 output_min;
77 u32 output_max;
78 };
79
80 static const struct mpr_func_spec mpr_func_spec[] = {
81 [MPR_FUNCTION_A] = {.output_min = 1677722, .output_max = 15099494},
82 [MPR_FUNCTION_B] = {.output_min = 419430, .output_max = 3774874},
83 [MPR_FUNCTION_C] = {.output_min = 3355443, .output_max = 13421773},
84 };
85
86 struct mpr_chan {
87 s32 pres; /* pressure value */
88 s64 ts; /* timestamp */
89 };
90
91 struct mpr_data {
92 struct i2c_client *client;
93 struct mutex lock; /* i2c transactions */
94 u32 pmin; /* minimal pressure in pascal */
95 u32 pmax; /* maximal pressure in pascal */
96 u32 function; /* transfer function */
97 u32 outmin; /* minimal numerical range raw value from sensor */
98 u32 outmax; /* maximal numerical range raw value from sensor */
99 int scale; /* int part of scale */
100 int scale2; /* nano part of scale */
101 int offset; /* int part of offset */
102 int offset2; /* nano part of offset */
103 struct gpio_desc *gpiod_reset; /* reset */
104 int irq; /* end of conversion interrupt */
105 struct completion completion; /* handshake from irq to read */
106 struct mpr_chan chan; /* channel values for buffered mode */
107 struct regulator *vdd; /* optional external voltage regulator */
108 };
109
110 static const struct iio_chan_spec mpr_channels[] = {
111 {
112 .type = IIO_PRESSURE,
113 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
114 BIT(IIO_CHAN_INFO_SCALE) |
115 BIT(IIO_CHAN_INFO_OFFSET),
116 .scan_index = 0,
117 .scan_type = {
118 .sign = 's',
119 .realbits = 32,
120 .storagebits = 32,
121 .endianness = IIO_CPU,
122 },
123 },
124 IIO_CHAN_SOFT_TIMESTAMP(1),
125 };
126
127 static void mpr_reset(struct mpr_data *data)
128 {
129 if (data->gpiod_reset) {
130 gpiod_set_value(data->gpiod_reset, 0);
131 udelay(10);
132 gpiod_set_value(data->gpiod_reset, 1);
133 }
134 }
135
136 /**
137 * mpr_read_pressure() - Read pressure value from sensor via I2C
138 * @data: Pointer to private data struct.
139 * @press: Output value read from sensor.
140 *
141 * Reading from the sensor by sending and receiving I2C telegrams.
142 *
143 * If there is an end of conversion (EOC) interrupt registered the function waits for a maximum of
144 * one second for the interrupt.
145 *
146 * Context: The function can sleep and data->lock should be held when calling it.
147 * Return:
148 * * 0 - OK, the pressure value could be read
149 * * -ETIMEDOUT - Timeout while waiting for the EOC interrupt or busy flag is still set after nloops
150 * attempts of reading
151 */
152 static int mpr_read_pressure(struct mpr_data *data, s32 *press)
153 {
154 struct device *dev = &data->client->dev;
155 int ret, i;
156 u8 wdata[] = {0xAA, 0x00, 0x00};
157 s32 status;
158 int nloops = 10;
159 u8 buf[5];
160
161 reinit_completion(&data->completion);
162
163 ret = i2c_master_send(data->client, wdata, sizeof(wdata));
164 if (ret < 0) {
165 dev_err(dev, "error while writing ret: %d\n", ret);
166 return ret;
167 }
168 if (ret != sizeof(wdata)) {
> 169 dev_err(dev, "received size doesn't fit - ret: %d / %d\n", ret, sizeof(wdata));
170 return -EIO;
171 }
172
173 if (data->irq > 0) {
174 ret = wait_for_completion_timeout(&data->completion, HZ);
175 if (!ret) {
176 dev_err(dev, "timeout while waiting for eoc interrupt\n");
177 return -ETIMEDOUT;
178 }
179 } else {
180 /* wait until status indicates data is ready */
181 for (i = 0; i < nloops; i++) {
182 /*
183 * datasheet only says to wait at least 5 ms for the data but leave the
184 * maximum response time open
185 * --> let's try it nloops (10) times which seems to be quite long
186 */
187 usleep_range(5000, 10000);
188 status = i2c_smbus_read_byte(data->client);
189 if (status < 0) {
190 dev_err(dev, "error while reading, status: %d\n", status);
191 return status;
192 }
193 if (!(status & MPR_I2C_BUSY))
194 break;
195 }
196 if (i == nloops) {
197 dev_err(dev, "timeout while reading\n");
198 return -ETIMEDOUT;
199 }
200 }
201
202 ret = i2c_master_recv(data->client, buf, sizeof(buf));
203 if (ret < 0) {
204 dev_err(dev, "error in i2c_master_recv ret: %d\n", ret);
205 return ret;
206 }
207 if (ret != sizeof(buf)) {
208 dev_err(dev, "received size doesn't fit - ret: %d / %d\n", ret, sizeof(buf));
209 return -EIO;
210 }
211
212 if (buf[0] & MPR_I2C_BUSY) {
213 /* it should never be the case that status still indicates business */
214 dev_err(dev, "data still not ready: %08x\n", buf[0]);
215 return -ETIMEDOUT;
216 }
217
218 *press = get_unaligned_be24(&buf[1]);
219
220 dev_dbg(dev, "received: %*ph cnt: %d\n", ret, buf, *press);
221
222 return 0;
223 }
224
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests
next prev parent reply other threads:[~2023-04-20 22:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-20 19:58 [PATCH v3 0/3] Support Honeywell mprls0025pa pressure sensor Andreas Klinger
2023-04-20 20:00 ` [PATCH v3 1/3] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor Andreas Klinger
2023-04-21 7:21 ` Krzysztof Kozlowski
2023-04-20 20:00 ` [PATCH v3 2/3] iio: pressure: Honeywell mprls0025pa pressure sensor Andreas Klinger
2023-04-20 22:04 ` kernel test robot [this message]
2023-04-23 10:30 ` Jonathan Cameron
2023-04-20 20:01 ` [PATCH v3 3/3] MAINTAINERS: Add Honeywell mprls0025pa sensor Andreas Klinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202304210512.5qdqDRgd-lkp@intel.com \
--to=lkp@intel.com \
--cc=ak@it-klinger.de \
--cc=ang.iglesiasg@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox