From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, linux-kernel@vger.kernel.org,
torvalds@linux-foundation.org, akpm@linux-foundation.org,
linux@roeck-us.net, shuah@kernel.org, patches@kernelci.org,
lkft-triage@lists.linaro.org, pavel@denx.de,
jonathanh@nvidia.com, f.fainelli@gmail.com,
sudipm.mukherjee@gmail.com, srw@sladewatkins.net, rwarsow@gmx.de
Subject: [PATCH 5.10 00/68] 5.10.179-rc1 review
Date: Mon, 24 Apr 2023 15:17:31 +0200 [thread overview]
Message-ID: <20230424131127.653885914@linuxfoundation.org> (raw)
This is the start of the stable review cycle for the 5.10.179 release.
There are 68 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 26 Apr 2023 13:11:11 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.179-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 5.10.179-rc1
Ekaterina Orlova <vorobushek.ok@gmail.com>
ASN.1: Fix check for strdup() success
Nikita Zhandarovich <n.zhandarovich@fintech.ru>
ASoC: fsl_asrc_dma: fix potential null-ptr-deref
Dan Carpenter <error27@gmail.com>
iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
pwm: hibvt: Explicitly set .polarity in .get_state()
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
pwm: iqs620a: Explicitly set .polarity in .get_state()
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
pwm: meson: Explicitly set .polarity in .get_state()
Kuniyuki Iwashima <kuniyu@amazon.com>
sctp: Call inet6_destroy_sock() via sk->sk_destruct().
Kuniyuki Iwashima <kuniyu@amazon.com>
dccp: Call inet6_destroy_sock() via sk->sk_destruct().
Kuniyuki Iwashima <kuniyu@amazon.com>
inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().
Kuniyuki Iwashima <kuniyu@amazon.com>
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
Kuniyuki Iwashima <kuniyu@amazon.com>
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
Baokun Li <libaokun1@huawei.com>
ext4: fix use-after-free in ext4_xattr_set_entry
Ritesh Harjani <riteshh@linux.ibm.com>
ext4: remove duplicate definition of ext4_xattr_ibody_inline_set()
Tudor Ambarus <tudor.ambarus@linaro.org>
Revert "ext4: fix use-after-free in ext4_xattr_set_entry"
Miklos Szeredi <mszeredi@redhat.com>
fuse: fix deadlock between atomic O_TRUNC and page invalidation
Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
fuse: always revalidate rename target dentry
Miklos Szeredi <mszeredi@redhat.com>
fuse: fix attr version comparison in fuse_read_update_size()
Miklos Szeredi <mszeredi@redhat.com>
fuse: check s_root when destroying sb
Connor Kuehl <ckuehl@redhat.com>
virtiofs: split requests that exceed virtqueue size
Miklos Szeredi <mszeredi@redhat.com>
virtiofs: clean up error handling in virtio_fs_get_tree()
Alyssa Ross <hi@alyssa.is>
purgatory: fix disabling debug info
Salvatore Bonaccorso <carnil@debian.org>
docs: futex: Fix kernel-doc references after code split-up preparation
Jiaxun Yang <jiaxun.yang@flygoat.com>
MIPS: Define RUNTIME_DISCARD_EXIT in LD script
Qais Yousef <qyousef@layalina.io>
sched/fair: Fixes for capacity inversion detection
Qais Yousef <qyousef@layalina.io>
sched/uclamp: Fix a uninitialized variable warnings
Qais Yousef <qais.yousef@arm.com>
sched/fair: Consider capacity inversion in util_fits_cpu()
Qais Yousef <qais.yousef@arm.com>
sched/fair: Detect capacity inversion
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Make cpu_overutilized() use util_fits_cpu()
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Make select_idle_capacity() use util_fits_cpu()
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Fix fits_capacity() check in feec()
Qais Yousef <qais.yousef@arm.com>
sched/uclamp: Make task_fits_capacity() use util_fits_cpu()
Peter Xu <peterx@redhat.com>
mm/khugepaged: check again on anon uffd-wp during isolation
Bhavya Kapoor <b-kapoor@ti.com>
mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25
Ondrej Mosnacek <omosnace@redhat.com>
kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memstick: fix memory leak if card device is never registered
Ryusuke Konishi <konishi.ryusuke@gmail.com>
nilfs2: initialize unused bytes in segment summary blocks
Brian Masney <bmasney@redhat.com>
iio: light: tsl2772: fix reading proximity-diodes from device tree
Brian Foster <bfoster@redhat.com>
xfs: drop submit side trans alloc for append ioends
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
powerpc/doc: Fix htmldocs errors
Juergen Gross <jgross@suse.com>
xen/netback: use same error messages for same errors
Sagi Grimberg <sagi@grimberg.me>
nvme-tcp: fix a possible UAF when failing to allocate an io queue
Heiko Carstens <hca@linux.ibm.com>
s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling
Álvaro Fernández Rojas <noltari@gmail.com>
net: dsa: b53: mmap: add phy ops
Damien Le Moal <damien.lemoal@opensource.wdc.com>
scsi: core: Improve scsi_vpd_inquiry() checks
Tomas Henzl <thenzl@redhat.com>
scsi: megaraid_sas: Fix fw_crash_buffer_show()
Nick Desaulniers <ndesaulniers@google.com>
selftests: sigaltstack: fix -Wuninitialized
Jonathan Denose <jdenose@chromium.org>
Input: i8042 - add quirk for Fujitsu Lifebook A574/H
Douglas Raillard <douglas.raillard@arm.com>
f2fs: Fix f2fs_truncate_partial_nodes ftrace event
Sebastian Basierski <sebastianx.basierski@intel.com>
e1000e: Disable TSO on i219-LM card to increase speed
Daniel Borkmann <daniel@iogearbox.net>
bpf: Fix incorrect verifier pruning due to missing register precision taints
Ido Schimmel <idosch@nvidia.com>
mlxsw: pci: Fix possible crash during initialization
Alexander Aring <aahringo@redhat.com>
net: rpl: fix rpl header size calculation
Nikita Zhandarovich <n.zhandarovich@fintech.ru>
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
Aleksandr Loktionov <aleksandr.loktionov@intel.com>
i40e: fix i40e_setup_misc_vector() error handling
Aleksandr Loktionov <aleksandr.loktionov@intel.com>
i40e: fix accessing vsi->active_filters without holding lock
Florian Westphal <fw@strlen.de>
netfilter: nf_tables: fix ifdef to also consider nf_tables=m
Ding Hui <dinghui@sangfor.com.cn>
sfc: Fix use-after-free due to selftest_work
Jonathan Cooper <jonathan.s.cooper@amd.com>
sfc: Split STATE_READY in to STATE_NET_DOWN and STATE_NET_UP.
Xuan Zhuo <xuanzhuo@linux.alibaba.com>
virtio_net: bugfix overflow inside xdp_linearize_page()
Gwangun Jung <exsociety@gmail.com>
net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
regulator: fan53555: Explicitly include bits header
Florian Westphal <fw@strlen.de>
netfilter: br_netfilter: fix recent physdev match breakage
Peng Fan <peng.fan@nxp.com>
arm64: dts: imx8mm-evk: correct pmic clock source
Marc Gonzalez <mgonzalez@freebox.fr>
arm64: dts: meson-g12-common: specify full DMC range
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
Jianqun Xu <jay.xu@rock-chips.com>
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
-------------
Diffstat:
Documentation/kernel-hacking/locking.rst | 2 +-
Documentation/powerpc/associativity.rst | 29 ++--
Documentation/powerpc/index.rst | 1 +
.../translations/it_IT/kernel-hacking/locking.rst | 2 +-
Makefile | 4 +-
arch/arm/boot/dts/rk3288.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +-
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 +-
arch/mips/kernel/vmlinux.lds.S | 2 +
arch/s390/kernel/ptrace.c | 8 +-
arch/x86/purgatory/Makefile | 3 +-
drivers/iio/adc/at91-sama5d2_adc.c | 2 +-
drivers/iio/light/tsl2772.c | 1 +
drivers/input/serio/i8042-x86ia64io.h | 8 +
drivers/memstick/core/memstick.c | 5 +-
drivers/mmc/host/sdhci_am654.c | 2 -
drivers/net/dsa/b53/b53_mmap.c | 14 ++
drivers/net/ethernet/intel/e1000e/netdev.c | 51 +++---
drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +-
.../ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c | 2 +
drivers/net/ethernet/mellanox/mlxsw/pci_hw.h | 2 +-
drivers/net/ethernet/sfc/ef100_netdev.c | 6 +-
drivers/net/ethernet/sfc/efx.c | 30 ++--
drivers/net/ethernet/sfc/efx_common.c | 12 +-
drivers/net/ethernet/sfc/efx_common.h | 6 +-
drivers/net/ethernet/sfc/ethtool_common.c | 2 +-
drivers/net/ethernet/sfc/net_driver.h | 50 +++++-
drivers/net/virtio_net.c | 8 +-
drivers/net/xen-netback/netback.c | 6 +-
drivers/nvme/host/tcp.c | 46 +++---
drivers/pwm/pwm-hibvt.c | 1 +
drivers/pwm/pwm-iqs620a.c | 1 +
drivers/pwm/pwm-meson.c | 7 +
drivers/regulator/fan53555.c | 11 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
drivers/scsi/scsi.c | 11 +-
fs/ext4/inline.c | 11 +-
fs/ext4/xattr.c | 26 +--
fs/ext4/xattr.h | 6 +-
fs/fuse/dir.c | 7 +-
fs/fuse/file.c | 31 ++--
fs/fuse/fuse_i.h | 3 +
fs/fuse/inode.c | 5 +-
fs/fuse/virtio_fs.c | 46 ++++--
fs/nilfs2/segment.c | 20 +++
fs/xfs/xfs_aops.c | 45 +----
include/linux/skbuff.h | 5 +-
include/net/ipv6.h | 2 +
include/net/udp.h | 2 +-
include/net/udplite.h | 8 -
include/trace/events/f2fs.h | 2 +-
kernel/bpf/verifier.c | 15 ++
kernel/sched/core.c | 10 +-
kernel/sched/fair.c | 183 ++++++++++++++++-----
kernel/sched/sched.h | 70 +++++++-
kernel/sys.c | 69 ++++----
mm/khugepaged.c | 4 +
net/bridge/br_netfilter_hooks.c | 17 +-
net/dccp/dccp.h | 1 +
net/dccp/ipv6.c | 15 +-
net/dccp/proto.c | 8 +-
net/ipv4/udp.c | 9 +-
net/ipv4/udplite.c | 8 +
net/ipv6/af_inet6.c | 15 +-
net/ipv6/ipv6_sockglue.c | 20 +--
net/ipv6/ping.c | 6 -
net/ipv6/raw.c | 2 -
net/ipv6/rpl.c | 3 +-
net/ipv6/tcp_ipv6.c | 8 +-
net/ipv6/udp.c | 17 +-
net/ipv6/udp_impl.h | 1 +
net/ipv6/udplite.c | 9 +-
net/l2tp/l2tp_ip6.c | 2 -
net/mptcp/protocol.c | 7 -
net/sched/sch_qfq.c | 13 +-
net/sctp/socket.c | 29 +++-
scripts/asn1_compiler.c | 2 +-
sound/soc/fsl/fsl_asrc_dma.c | 11 +-
.../selftests/sigaltstack/current_stack_pointer.h | 23 +++
tools/testing/selftests/sigaltstack/sas.c | 7 +-
81 files changed, 751 insertions(+), 409 deletions(-)
next reply other threads:[~2023-04-24 13:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-24 13:17 Greg Kroah-Hartman [this message]
2023-04-25 1:04 ` [PATCH 5.10 00/68] 5.10.179-rc1 review Guenter Roeck
2023-04-25 10:44 ` Jon Hunter
2023-04-25 13:28 ` Naresh Kamboju
2023-04-25 13:35 ` Chris Paterson
2023-04-25 18:43 ` Florian Fainelli
2023-04-26 0:28 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230424131127.653885914@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=f.fainelli@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lkft-triage@lists.linaro.org \
--cc=patches@kernelci.org \
--cc=patches@lists.linux.dev \
--cc=pavel@denx.de \
--cc=rwarsow@gmx.de \
--cc=shuah@kernel.org \
--cc=srw@sladewatkins.net \
--cc=stable@vger.kernel.org \
--cc=sudipm.mukherjee@gmail.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox