From: Lee Jones <lee@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lee Jones <lee@kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] MFD for v6.4
Date: Tue, 2 May 2023 17:25:24 +0100 [thread overview]
Message-ID: <20230502162524.GJ620451@google.com> (raw)
Good afternoon Linus,
The following changes since commit fe15c26ee26efa11741a7b632e9f23b01aca4cc6:
Linux 6.3-rc1 (2023-03-05 14:52:03 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds.git tags/leds-next-6.4
for you to fetch changes up to 8325642d2757eba80210dec727bb0bcffb837ff1:
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver (2023-04-27 17:42:33 +0100)
----------------------------------------------------------------
- New Drivers
- Add support for MediaTek MT6370 LED Indicator
- Add support for MediaTek MT6370 Flashlight
- Add support for QCOM PMIC Flash
- Add support for Rohm BD2606MVV Charge Pump LED
- New Device Support
- Add support for PMK8550 PWM to QCOM LPG
- New Functionality
- Add support for high resolution PWM to QCOM LPG
- Fix-ups
- Kconfig 'depends' and 'select' dependency changes
- Remove unused / irrelevant includes
- Remove unnecessary checks (already performed further into the call stack)
- Trivial: Fix commentary, simplify error messages
- Rid 'defined but not used' warnings
- Provide documentation
- Explicitly provide include files
- Bug Fixes
- Mark GPIO LED as BROKEN
- Fix Kconfig entries
- Fix various Smatch staticify reports
- Fix error handling (or a lack there of)
----------------------------------------------------------------
Alexander Dahl (1):
docs: leds: ledtrig-oneshot: Fix spelling mistake
Andreas Kemnade (2):
dt-bindings: leds: Add ROHM BD2606MVV LED
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
Andy Shevchenko (2):
leds: lp8860: Remove unused of_gpio,h
leds: lp8860: Remove duplicate NULL checks for gpio_desc
Anjelique Melendez (3):
dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
Bagas Sanjaya (4):
Documentation: leds: Add MT6370 doc to the toctree
Documentation: leds: mt6370: Properly wrap hw_pattern chart
Documentation: leds: MT6370: Use bullet lists for timing variables
MAINTAINERS: Add entry for LED devices documentation
ChiYuan Huang (4):
leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
leds: flash: mt6370: Add MediaTek MT6370 flashlight support
docs: leds: Add MT6370 RGB LED pattern document
leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
Christophe JAILLET (1):
leds: pwm-multicolor: Simplify an error message
Fenglin Wu (2):
leds: flash: Add driver to support flash LED module in QCOM PMICs
dt-bindings: leds: Add QCOM flash LED controller
H. Nikolaus Schaller (1):
leds: tca6507: Fix error handling of using fwnode_property_read_string
Krzysztof Kozlowski (1):
leds: tlc591xx: Mark OF related data as maybe unused
Linus Walleij (1):
leds: Mark GPIO LED trigger broken
Luca Weiss (1):
dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
Lukas Bulwahn (1):
leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
Manivannan Sadhasivam (1):
dt-bindings: leds: Document commonly used LED triggers
Rafał Miłecki (1):
dt-bindings: leds: Add "usbport" trigger
Randy Dunlap (1):
leds: TI_LMU_COMMON: select REGMAP instead of depending on it
Thomas Weißschuh (1):
leds: Fix reference to led_set_brightness() in doc
Tom Rix (1):
leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
Wadim Egorov (1):
dt-bindings: leds: Convert PCA9532 to dtschema
Documentation/devicetree/bindings/leds/common.yaml | 35 +-
.../devicetree/bindings/leds/leds-pca9532.txt | 49 -
.../devicetree/bindings/leds/leds-qcom-lpg.yaml | 1 +
.../devicetree/bindings/leds/nxp,pca953x.yaml | 90 ++
.../bindings/leds/qcom,spmi-flash-led.yaml | 117 +++
.../devicetree/bindings/leds/rohm,bd2606mvv.yaml | 81 ++
Documentation/leds/index.rst | 1 +
Documentation/leds/leds-mt6370-rgb.rst | 64 ++
Documentation/leds/ledtrig-oneshot.rst | 2 +-
MAINTAINERS | 1 +
drivers/leds/Kconfig | 16 +-
drivers/leds/Makefile | 1 +
drivers/leds/flash/Kconfig | 28 +
drivers/leds/flash/Makefile | 2 +
drivers/leds/flash/leds-mt6370-flash.c | 573 +++++++++++
drivers/leds/flash/leds-qcom-flash.c | 773 +++++++++++++++
drivers/leds/leds-bd2606mvv.c | 160 ++++
drivers/leds/leds-lp8860.c | 10 +-
drivers/leds/leds-tca6507.c | 5 +-
drivers/leds/leds-tlc591xx.c | 2 +-
drivers/leds/rgb/Kconfig | 13 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-mt6370-rgb.c | 1011 ++++++++++++++++++++
drivers/leds/rgb/leds-pwm-multicolor.c | 4 +-
drivers/leds/rgb/leds-qcom-lpg.c | 160 +++-
drivers/leds/trigger/Kconfig | 1 +
include/linux/leds.h | 2 +-
27 files changed, 3091 insertions(+), 112 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt
create mode 100644 Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
create mode 100644 Documentation/leds/leds-mt6370-rgb.rst
create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
create mode 100644 drivers/leds/flash/leds-qcom-flash.c
create mode 100644 drivers/leds/leds-bd2606mvv.c
create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c
--
Lee Jones [李琼斯]
next reply other threads:[~2023-05-02 16:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-02 16:25 Lee Jones [this message]
2023-05-02 16:28 ` [GIT PULL] LEDs for v6.4 Lee Jones
2023-05-03 18:20 ` Pavel Machek
2023-05-03 18:25 ` Lee Jones
2023-05-02 17:57 ` [GIT PULL] MFD " pr-tracker-bot
-- strict thread matches above, loose matches on Subject: below --
2023-05-02 16:22 Lee Jones
2023-05-02 17:57 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230502162524.GJ620451@google.com \
--to=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox