[net PATCH v5 02/11] octeontx2-af: Fix start and end bit for scan config

[Sai Krishna <saikrishnag@marvell.com>]

From: Ratheesh Kannoth <rkannoth@marvell.com>

In the current driver, NPC exact match feature was not getting
enabled as configured bit was not read properly.
for_each_set_bit_from() need end bit as one bit post
position in the bit map to read NPC exact nibble enable
bits properly. This patch fixes the same.

Fixes: b747923afff8 ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
index 006beb5cf98d..f15efd41972e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
@@ -594,8 +594,7 @@ static int npc_scan_kex(struct rvu *rvu, int blkaddr, u8 intf)
 	 */
 	masked_cfg = cfg & NPC_EXACT_NIBBLE;
 	bitnr = NPC_EXACT_NIBBLE_START;
-	for_each_set_bit_from(bitnr, (unsigned long *)&masked_cfg,
-			      NPC_EXACT_NIBBLE_START) {
+	for_each_set_bit_from(bitnr, (unsigned long *)&masked_cfg, NPC_EXACT_NIBBLE_END + 1) {
 		npc_scan_exact_result(mcam, bitnr, key_nibble, intf);
 		key_nibble++;
 	}
-- 
2.25.1