From: Shawn Guo <shawnguo@kernel.org>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V2] soc: imx: support i.MX93 soc device
Date: Mon, 15 May 2023 11:07:41 +0800 [thread overview]
Message-ID: <20230515030741.GC767028@dragon> (raw)
In-Reply-To: <20230509091942.2923330-1-peng.fan@oss.nxp.com>
On Tue, May 09, 2023 at 05:19:42PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Similar to i.MX8M, add i.MX93 soc device support
This commit log doesn't provide too much helpful information. You may
want to briefly introduce i.MX93 UID, which looks something new?
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>
> V2:
> The ocotp yaml has got R-b from DT maintainer:
> https://lore.kernel.org/all/01be24b3-aaf2-e27b-d00e-f8649a497463@linaro.org/
>
> Remove uid_length from V1 which is unused.
>
> drivers/soc/imx/Makefile | 2 +-
> drivers/soc/imx/soc-imx8m.c | 64 ++++++++++++++++++++++++++++++++++++-
> 2 files changed, 64 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
> index a28c44a1f16a..83aff181ae51 100644
> --- a/drivers/soc/imx/Makefile
> +++ b/drivers/soc/imx/Makefile
> @@ -7,5 +7,5 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
> obj-$(CONFIG_IMX8M_BLK_CTRL) += imx8m-blk-ctrl.o
> obj-$(CONFIG_IMX8M_BLK_CTRL) += imx8mp-blk-ctrl.o
> -obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
> +obj-$(CONFIG_SOC_IMX9) += soc-imx8m.o imx93-src.o imx93-pd.o
> obj-$(CONFIG_IMX9_BLK_CTRL) += imx93-blk-ctrl.o
> diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
> index 1dcd243df567..0e69b8b48183 100644
> --- a/drivers/soc/imx/soc-imx8m.c
> +++ b/drivers/soc/imx/soc-imx8m.c
> @@ -25,8 +25,11 @@
>
> #define IMX8MP_OCOTP_UID_OFFSET 0x10
>
> +#define IMX93_OCOTP_UID_OFFSET 0x80c0
> +
> /* Same as ANADIG_DIGPROG_IMX7D */
> #define ANADIG_DIGPROG_IMX8MM 0x800
> +#define ANADIG_DIGPROG_IMX93 0x800
>
> struct imx8_soc_data {
> char *name;
> @@ -34,6 +37,7 @@ struct imx8_soc_data {
> };
>
> static u64 soc_uid;
> +static u64 soc_uid_h;
>
> #ifdef CONFIG_HAVE_ARM_SMCCC
> static u32 imx8mq_soc_revision_from_atf(void)
> @@ -141,6 +145,53 @@ static u32 __init imx8mm_soc_revision(void)
> return rev;
> }
>
> +static void __init imx93_soc_uid(void)
> +{
> + void __iomem *ocotp_base;
> + struct device_node *np;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,imx93-ocotp");
> + if (!np)
> + return;
> +
> + ocotp_base = of_iomap(np, 0);
> + WARN_ON(!ocotp_base);
> +
> + soc_uid = readl_relaxed(ocotp_base + IMX93_OCOTP_UID_OFFSET + 0x8);
> + soc_uid <<= 32;
> + soc_uid |= readl_relaxed(ocotp_base + IMX93_OCOTP_UID_OFFSET + 0xC);
> +
> + soc_uid_h = readl_relaxed(ocotp_base + IMX93_OCOTP_UID_OFFSET + 0x0);
> + soc_uid_h <<= 32;
> + soc_uid_h |= readl_relaxed(ocotp_base + IMX93_OCOTP_UID_OFFSET + 0x4);
> +
> + iounmap(ocotp_base);
> + of_node_put(np);
> +}
> +
> +static u32 __init imx93_soc_revision(void)
> +{
> + struct device_node *np;
> + void __iomem *anatop_base;
> + u32 rev;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,imx93-anatop");
> + if (!np)
> + return 0;
> +
> + anatop_base = of_iomap(np, 0);
> + WARN_ON(!anatop_base);
> +
> + rev = readl_relaxed(anatop_base + ANADIG_DIGPROG_IMX93);
> +
> + iounmap(anatop_base);
> + of_node_put(np);
> +
> + imx93_soc_uid();
> +
> + return rev;
> +}
> +
> static const struct imx8_soc_data imx8mq_soc_data = {
> .name = "i.MX8MQ",
> .soc_revision = imx8mq_soc_revision,
> @@ -161,11 +212,17 @@ static const struct imx8_soc_data imx8mp_soc_data = {
> .soc_revision = imx8mm_soc_revision,
> };
>
> +static const struct imx8_soc_data imx93_soc_data = {
> + .name = "i.MX93",
> + .soc_revision = imx93_soc_revision,
> +};
> +
> static __maybe_unused const struct of_device_id imx8_soc_match[] = {
> { .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
> { .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, },
> { .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, },
> { .compatible = "fsl,imx8mp", .data = &imx8mp_soc_data, },
> + { .compatible = "fsl,imx93", .data = &imx93_soc_data, },
> { }
> };
>
> @@ -212,7 +269,12 @@ static int __init imx8_soc_init(void)
> goto free_soc;
> }
>
> - soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid);
> + if (soc_uid_h) {
Unnecessary parentheses.
Shawn
> + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX%016llX",
> + soc_uid_h, soc_uid);
> + } else {
> + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid);
> + }
> if (!soc_dev_attr->serial_number) {
> ret = -ENOMEM;
> goto free_rev;
> --
> 2.37.1
>
next prev parent reply other threads:[~2023-05-15 3:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-09 9:19 [PATCH V2] soc: imx: support i.MX93 soc device Peng Fan (OSS)
2023-05-15 3:07 ` Shawn Guo [this message]
2023-05-15 6:33 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230515030741.GC767028@dragon \
--to=shawnguo@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox