From: Devi Priya <quic_devipriy@quicinc.com>
To: <agross@kernel.org>, <andersson@kernel.org>,
<konrad.dybcio@linaro.org>, <lpieralisi@kernel.org>,
<kw@linux.com>, <robh@kernel.org>, <bhelgaas@google.com>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<mturquette@baylibre.com>, <sboyd@kernel.org>, <mani@kernel.org>,
<linux-arm-msm@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: <quic_srichara@quicinc.com>, <quic_sjaganat@quicinc.com>,
<quic_kathirav@quicinc.com>, <quic_arajkuma@quicinc.com>,
<quic_anusha@quicinc.com>, <quic_ipkumar@quicinc.com>
Subject: [PATCH V4 2/6] clk: qcom: gcc-ipq9574: Add PCIe pipe clocks
Date: Fri, 19 May 2023 14:32:15 +0530 [thread overview]
Message-ID: <20230519090219.15925-3-quic_devipriy@quicinc.com> (raw)
In-Reply-To: <20230519090219.15925-1-quic_devipriy@quicinc.com>
Add the PCIe pipe clocks needed for enabling PCIe in IPQ9574.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
Changes in V4:
- Picked up the R-b tag
drivers/clk/qcom/gcc-ipq9574.c | 76 ++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
index b203e7aae145..1245ac52a17c 100644
--- a/drivers/clk/qcom/gcc-ipq9574.c
+++ b/drivers/clk/qcom/gcc-ipq9574.c
@@ -1573,6 +1573,24 @@ static struct clk_regmap_phy_mux pcie0_pipe_clk_src = {
},
};
+static struct clk_branch gcc_pcie0_pipe_clk = {
+ .halt_reg = 0x28044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x28044,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pcie0_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &pcie0_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_regmap_phy_mux pcie1_pipe_clk_src = {
.reg = 0x29064,
.clkr = {
@@ -1587,6 +1605,24 @@ static struct clk_regmap_phy_mux pcie1_pipe_clk_src = {
},
};
+static struct clk_branch gcc_pcie1_pipe_clk = {
+ .halt_reg = 0x29044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x29044,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pcie1_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &pcie1_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_regmap_phy_mux pcie2_pipe_clk_src = {
.reg = 0x2a064,
.clkr = {
@@ -1601,6 +1637,24 @@ static struct clk_regmap_phy_mux pcie2_pipe_clk_src = {
},
};
+static struct clk_branch gcc_pcie2_pipe_clk = {
+ .halt_reg = 0x2a044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x2a044,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pcie2_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &pcie2_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_regmap_phy_mux pcie3_pipe_clk_src = {
.reg = 0x2b064,
.clkr = {
@@ -1615,6 +1669,24 @@ static struct clk_regmap_phy_mux pcie3_pipe_clk_src = {
},
};
+static struct clk_branch gcc_pcie3_pipe_clk = {
+ .halt_reg = 0x2b044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x2b044,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pcie3_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &pcie3_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static const struct freq_tbl ftbl_pcie_rchng_clk_src[] = {
F(24000000, P_XO, 1, 0, 0),
F(100000000, P_GPLL0, 8, 0, 0),
@@ -3968,9 +4040,13 @@ static struct clk_regmap *gcc_ipq9574_clks[] = {
[GCC_PCIE3_AXI_S_BRIDGE_CLK] = &gcc_pcie3_axi_s_bridge_clk.clkr,
[GCC_PCIE3_AXI_S_CLK] = &gcc_pcie3_axi_s_clk.clkr,
[PCIE0_PIPE_CLK_SRC] = &pcie0_pipe_clk_src.clkr,
+ [GCC_PCIE0_PIPE_CLK] = &gcc_pcie0_pipe_clk.clkr,
[PCIE1_PIPE_CLK_SRC] = &pcie1_pipe_clk_src.clkr,
+ [GCC_PCIE1_PIPE_CLK] = &gcc_pcie1_pipe_clk.clkr,
[PCIE2_PIPE_CLK_SRC] = &pcie2_pipe_clk_src.clkr,
+ [GCC_PCIE2_PIPE_CLK] = &gcc_pcie2_pipe_clk.clkr,
[PCIE3_PIPE_CLK_SRC] = &pcie3_pipe_clk_src.clkr,
+ [GCC_PCIE3_PIPE_CLK] = &gcc_pcie3_pipe_clk.clkr,
[PCIE_AUX_CLK_SRC] = &pcie_aux_clk_src.clkr,
[GCC_PCIE0_AUX_CLK] = &gcc_pcie0_aux_clk.clkr,
[GCC_PCIE1_AUX_CLK] = &gcc_pcie1_aux_clk.clkr,
--
2.17.1
next prev parent reply other threads:[~2023-05-19 9:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-19 9:02 [PATCH V4 0/6] Add PCIe support for IPQ9574 Devi Priya
2023-05-19 9:02 ` [PATCH V4 1/6] dt-bindings: clock: Add PCIe pipe clock definitions Devi Priya
2023-05-19 9:02 ` Devi Priya [this message]
2023-05-19 9:02 ` [PATCH V4 3/6] dt-bindings: PCI: qcom: Add IPQ9574 Devi Priya
2023-05-28 14:17 ` Manivannan Sadhasivam
2023-06-03 7:44 ` Devi Priya
2023-05-19 9:02 ` [PATCH V4 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes Devi Priya
2023-05-19 9:02 ` [PATCH V4 5/6] arm64: dts: qcom: ipq9574: Enable PCIe PHYs and controllers Devi Priya
2023-05-19 9:02 ` [PATCH V4 6/6] PCI: qcom: Add support for IPQ9574 Devi Priya
2023-05-22 9:22 ` [PATCH V4 0/6] Add PCIe " Lorenzo Pieralisi
2023-05-28 14:21 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230519090219.15925-3-quic_devipriy@quicinc.com \
--to=quic_devipriy@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mturquette@baylibre.com \
--cc=quic_anusha@quicinc.com \
--cc=quic_arajkuma@quicinc.com \
--cc=quic_ipkumar@quicinc.com \
--cc=quic_kathirav@quicinc.com \
--cc=quic_sjaganat@quicinc.com \
--cc=quic_srichara@quicinc.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox