From: Jonathan Cameron <jic23@kernel.org>
To: Astrid Rost <astrid.rost@axis.com>
Cc: "Lars-Peter Clausen" <lars@metafoo.de>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@axis.com,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mathieu Othacehe" <m.othacehe@gmail.com>
Subject: Re: [PATCH v3 7/7] iio: light: vcnl4000: Add calibration bias for 4040/4200
Date: Sat, 20 May 2023 17:18:55 +0100 [thread overview]
Message-ID: <20230520171855.058c8256@jic23-huawei> (raw)
In-Reply-To: <20230517151406.368219-8-astrid.rost@axis.com>
On Wed, 17 May 2023 17:14:06 +0200
Astrid Rost <astrid.rost@axis.com> wrote:
> The calibration bias is setting the LED current to change
> the detection distance.
> Add read/write attribute for proximity calibration bias and read
> attribute for available values.
> This is supported for vcnl4040 and vcnl4200.
>
> Signed-off-by: Astrid Rost <astrid.rost@axis.com>
This and other patches I didn't comment on look fine to me.
Thanks,
Jonathan
> ---
> drivers/iio/light/vcnl4000.c | 98 ++++++++++++++++++++++++++++++++++--
> 1 file changed, 95 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
> index 631ed6aa26b2..0a6e38e56a7c 100644
> --- a/drivers/iio/light/vcnl4000.c
> +++ b/drivers/iio/light/vcnl4000.c
> @@ -91,6 +91,7 @@
> #define VCNL4040_CONF1_PS_PERS GENMASK(5, 4) /* Proximity interrupt persistence setting */
> #define VCNL4040_PS_CONF2_PS_INT GENMASK(9, 8) /* Proximity interrupt mode */
> #define VCNL4040_PS_CONF3_MPS GENMASK(6, 5) /* Proximity multi pulse number */
> +#define VCNL4040_PS_MS_LED_I GENMASK(10, 8) /* Proximity current */
> #define VCNL4040_PS_IF_AWAY BIT(8) /* Proximity event cross low threshold */
> #define VCNL4040_PS_IF_CLOSE BIT(9) /* Proximity event cross high threshold */
> #define VCNL4040_ALS_RISING BIT(12) /* Ambient Light cross high threshold */
> @@ -156,6 +157,18 @@ static const int vcnl4200_als_it_times[][2] = {
> {0, 200000},
> {0, 400000},
> };
> +
> +static const int vcnl4040_ps_calibbias_ua[][2] = {
> + {0, 50000},
> + {0, 75000},
> + {0, 100000},
> + {0, 120000},
> + {0, 140000},
> + {0, 160000},
> + {0, 180000},
> + {0, 200000},
> +};
> +
> static const int vcnl4040_als_persistence[] = {1, 2, 4, 8};
> static const int vcnl4040_ps_persistence[] = {1, 2, 3, 4};
> static const int vcnl4040_ps_oversampling_ratio[] = {1, 2, 4, 8};
> @@ -831,6 +844,57 @@ static ssize_t vcnl4040_write_ps_oversampling_ratio(struct vcnl4000_data *data,
> return ret;
> }
>
> +static ssize_t vcnl4040_read_ps_calibbias(struct vcnl4000_data *data, int *val, int *val2)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF3);
> + if (ret < 0)
> + return ret;
> +
> + ret = FIELD_GET(VCNL4040_PS_MS_LED_I, ret);
> +
> + if (ret >= ARRAY_SIZE(vcnl4040_ps_calibbias_ua))
> + return -EINVAL;
> +
> + *val = vcnl4040_ps_calibbias_ua[ret][0];
> + *val2 = vcnl4040_ps_calibbias_ua[ret][1];
> +
> + return ret;
> +}
> +
> +static ssize_t vcnl4040_write_ps_calibbias(struct vcnl4000_data *data, int val)
> +{
> + unsigned int i;
> + int ret, index = -1;
> + u16 regval;
> +
> + for (i = 0; i < ARRAY_SIZE(vcnl4040_ps_calibbias_ua); i++) {
> + if (val == vcnl4040_ps_calibbias_ua[i][1]) {
> + index = i;
> + break;
> + }
> + }
> +
> + if (index < 0)
> + return -EINVAL;
> +
> + mutex_lock(&data->vcnl4000_lock);
> +
> + ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF3);
> + if (ret < 0)
> + goto out;
> +
> + regval = (ret & ~VCNL4040_PS_MS_LED_I) |
> + FIELD_PREP(VCNL4040_PS_MS_LED_I, index);
> + ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF3,
> + regval);
> +
> +out:
> + mutex_unlock(&data->vcnl4000_lock);
> + return ret;
> +}
> +
> static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int *val, int *val2, long mask)
> @@ -891,7 +955,16 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> default:
> return -EINVAL;
> }
> -
> + case IIO_CHAN_INFO_CALIBBIAS:
> + switch (chan->type) {
> + case IIO_PROXIMITY:
> + ret = vcnl4040_read_ps_calibbias(data, val, val2);
> + if (ret < 0)
> + return ret;
> + return IIO_VAL_INT_PLUS_MICRO;
> + default:
> + return -EINVAL;
> + }
> default:
> return -EINVAL;
> }
> @@ -922,6 +995,13 @@ static int vcnl4040_write_raw(struct iio_dev *indio_dev,
> default:
> return -EINVAL;
> }
> + case IIO_CHAN_INFO_CALIBBIAS:
> + switch (chan->type) {
> + case IIO_PROXIMITY:
> + return vcnl4040_write_ps_calibbias(data, val2);
> + default:
> + return -EINVAL;
> + }
> default:
> return -EINVAL;
> }
> @@ -961,6 +1041,16 @@ static int vcnl4040_read_avail(struct iio_dev *indio_dev,
> default:
> return -EINVAL;
> }
> + case IIO_CHAN_INFO_CALIBBIAS:
> + switch (chan->type) {
> + case IIO_PROXIMITY:
> + *vals = (int *)vcnl4040_ps_calibbias_ua;
> + *length = 2 * ARRAY_SIZE(vcnl4040_ps_calibbias_ua);
> + *type = IIO_VAL_INT_PLUS_MICRO;
> + return IIO_AVAIL_LIST;
> + default:
> + return -EINVAL;
> + }
> default:
> return -EINVAL;
> }
> @@ -1729,9 +1819,11 @@ static const struct iio_chan_spec vcnl4040_channels[] = {
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_INT_TIME),
> .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME),
> - BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
> + BIT(IIO_CHAN_INFO_CALIBBIAS),
> .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME) |
> - BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
> + BIT(IIO_CHAN_INFO_CALIBBIAS),
> .ext_info = vcnl4000_ext_info,
> .event_spec = vcnl4040_event_spec,
> .num_event_specs = ARRAY_SIZE(vcnl4040_event_spec),
prev parent reply other threads:[~2023-05-20 16:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 15:13 [PATCH v3 0/7] iio: light: vcnl4000: Add features for vncl4040/4200 Astrid Rost
2023-05-17 15:14 ` [PATCH v3 1/7] iio: light: vcnl4000: Add proximity irq for vcnl4200 Astrid Rost
2023-05-17 15:14 ` [PATCH v3 2/7] iio: light: vcnl4000: Add proximity ps_it " Astrid Rost
2023-05-17 15:14 ` [PATCH v3 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200 Astrid Rost
2023-05-17 21:25 ` kernel test robot
2023-05-17 15:14 ` [PATCH v3 4/7] iio: light: vcnl4000: add illuminance irq vcnl4040/4200 Astrid Rost
2023-05-17 15:14 ` [PATCH v3 5/7] iio: light: vcnl4000: Add period for vcnl4040/4200 Astrid Rost
2023-05-20 16:17 ` Jonathan Cameron
2023-05-17 15:14 ` [PATCH v3 6/7] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200 Astrid Rost
2023-05-17 15:14 ` [PATCH v3 7/7] iio: light: vcnl4000: Add calibration bias " Astrid Rost
2023-05-20 16:18 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230520171855.058c8256@jic23-huawei \
--to=jic23@kernel.org \
--cc=astrid.rost@axis.com \
--cc=kernel@axis.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.othacehe@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox