From: Niklas Schnelle <schnelle@linux.ibm.com>
To: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: "Bjorn Helgaas" <bhelgaas@google.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Alan Stern" <stern@rowland.harvard.edu>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
linux-pci@vger.kernel.org, "Arnd Bergmann" <arnd@kernel.org>,
linux-usb@vger.kernel.org
Subject: [PATCH v5 38/44] usb: pci-quirks: handle HAS_IOPORT dependencies
Date: Mon, 22 May 2023 12:50:43 +0200 [thread overview]
Message-ID: <20230522105049.1467313-39-schnelle@linux.ibm.com> (raw)
In-Reply-To: <20230522105049.1467313-1-schnelle@linux.ibm.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. In the pci-quirks case the I/O port acceses are
used in the quirks for several AMD south bridges. Move unrelated
ASMEDIA quirks out of the way and introduce an additional config option
for the AMD quirks that depends on HAS_IOPORT.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
drivers/usb/Kconfig | 10 +++
drivers/usb/core/hcd-pci.c | 2 +
drivers/usb/host/pci-quirks.c | 125 ++++++++++++++++++----------------
drivers/usb/host/pci-quirks.h | 30 ++++++--
4 files changed, 101 insertions(+), 66 deletions(-)
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7f33bcc315f2..abf8c6cdea9e 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -91,6 +91,16 @@ config USB_PCI
If you have such a device you may say N here and PCI related code
will not be built in the USB driver.
+config USB_PCI_AMD
+ bool "AMD PCI USB host support"
+ depends on USB_PCI && HAS_IOPORT
+ default X86 || MACH_LOONGSON64 || PPC_PASEMI
+ help
+ Enable workarounds for USB implementation quirks in SB600/SB700/SB800
+ and later south bridge implementations. These are common on x86 PCs
+ with AMD CPUs but rarely used elsewhere, with the exception of a few
+ powerpc and mips desktop machines.
+
if USB
source "drivers/usb/core/Kconfig"
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index ab2f3737764e..85a0aeae85cd 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -206,8 +206,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
goto free_irq_vectors;
}
+#ifdef CONFIG_USB_PCI_AMD
hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+#endif /* CONFIG_USB_PCI_AMD */
if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 2665832f9add..e0612f909fad 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,23 @@
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG 0xF8
+#define ASMT_DATA_WRITE1_REG 0xFC
+#define ASMT_CONTROL_REG 0xE0
+#define ASMT_CONTROL_WRITE_BIT 0x02
+#define ASMT_WRITEREG_CMD 0x10423
+#define ASMT_FLOWCTL_ADDR 0xFA30
+#define ASMT_FLOWCTL_DATA 0xBA
+#define ASMT_PSEUDO_DATA 0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
+#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
+
+#ifdef CONFIG_USB_PCI_AMD
/* AMD quirk use */
#define AB_REG_BAR_LOW 0xe0
#define AB_REG_BAR_HIGH 0xe1
@@ -93,21 +110,6 @@
#define NB_PIF0_PWRDOWN_0 0x01100012
#define NB_PIF0_PWRDOWN_1 0x01100013
-#define USB_INTEL_XUSB2PR 0xD0
-#define USB_INTEL_USB2PRM 0xD4
-#define USB_INTEL_USB3_PSSEN 0xD8
-#define USB_INTEL_USB3PRM 0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG 0xF8
-#define ASMT_DATA_WRITE1_REG 0xFC
-#define ASMT_CONTROL_REG 0xE0
-#define ASMT_CONTROL_WRITE_BIT 0x02
-#define ASMT_WRITEREG_CMD 0x10423
-#define ASMT_FLOWCTL_ADDR 0xFA30
-#define ASMT_FLOWCTL_DATA 0xBA
-#define ASMT_PSEUDO_DATA 0
-
/*
* amd_chipset_gen values represent AMD different chipset generations
*/
@@ -458,50 +460,6 @@ void usb_amd_quirk_pll_disable(void)
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
- unsigned long retry_count;
- unsigned char value;
-
- for (retry_count = 1000; retry_count > 0; --retry_count) {
-
- pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
- if (value == 0xff) {
- dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
- return -EIO;
- }
-
- if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
- return 0;
-
- udelay(50);
- }
-
- dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
- return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send command and address to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send data to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
void usb_amd_quirk_pll_enable(void)
{
usb_amd_quirk_pll(0);
@@ -630,7 +588,53 @@ bool usb_amd_pt_check_port(struct device *device, int port)
return !(value & BIT(port_shift));
}
EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif /* CONFIG_USB_PCI_AMD */
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+ unsigned long retry_count;
+ unsigned char value;
+
+ for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+ pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+ if (value == 0xff) {
+ dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+ return -EIO;
+ }
+
+ if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+ return 0;
+
+ udelay(50);
+ }
+
+ dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+ return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send command and address to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send data to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+#if defined(CONFIG_HAS_IOPORT) && defined(CONFIG_USB_UHCI_HCD)
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
@@ -711,6 +715,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
return 1;
}
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+#endif /* defined(CONFIG_HAS_IOPORT && defined(CONFIG_USB_UHCI_HCD) */
static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
{
@@ -723,6 +728,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
{
+#ifdef CONFIG_HAS_IOPORT
unsigned long base = 0;
int i;
@@ -737,6 +743,7 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
if (base)
uhci_check_and_reset_hc(pdev, base);
+#endif /* CONFIG_HAS_IOPORT */
}
static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..8c87505f0abc 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,9 +2,10 @@
#ifndef __LINUX_USB_PCI_QUIRKS_H
#define __LINUX_USB_PCI_QUIRKS_H
-#ifdef CONFIG_USB_PCI
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
+#ifdef CONFIG_USB_PCI_AMD
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
bool usb_amd_hang_symptom_quirk(void);
bool usb_amd_prefetch_quirk(void);
@@ -12,23 +13,38 @@ void usb_amd_dev_put(void);
bool usb_amd_quirk_pll_check(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
void sb800_prefetch(struct device *dev, int on);
bool usb_amd_pt_check_port(struct device *device, int port);
#else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+ return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+ return false;
+}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+ return false;
+}
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
static inline void sb800_prefetch(struct device *dev, int on) {}
static inline bool usb_amd_pt_check_port(struct device *device, int port)
{
return false;
}
+#endif /* CONFIG_USB_PCI_AMD */
+
+#ifdef CONFIG_USB_PCI
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_USB_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
--
2.39.2
next prev parent reply other threads:[~2023-05-22 10:55 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-22 10:50 [PATCH v5 00/44] treewide: Remove I/O port accessors for HAS_IOPORT=n Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 01/44] kgdb: add HAS_IOPORT dependency Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 02/44] ata: add HAS_IOPORT dependencies Niklas Schnelle
2023-05-22 11:49 ` Damien Le Moal
2023-05-22 10:50 ` [PATCH v5 03/44] char: " Niklas Schnelle
2023-07-04 8:09 ` Geert Uytterhoeven
2023-05-22 10:50 ` [PATCH v5 04/44] char: ipmi: handle " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 05/44] char: tpm: " Niklas Schnelle
2023-05-24 1:09 ` Jarkko Sakkinen
2023-05-24 3:13 ` Jarkko Sakkinen
2023-05-22 10:50 ` [PATCH v5 06/44] comedi: add " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 07/44] counter: add HAS_IOPORT_MAP dependency Niklas Schnelle
2023-06-08 14:59 ` William Breathitt Gray
2023-06-09 14:57 ` Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 08/44] /dev/port: don't compile file operations without CONFIG_DEVPORT Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 09/44] drm: handle HAS_IOPORT dependencies Niklas Schnelle
2023-05-22 12:38 ` Thomas Zimmermann
2023-05-22 13:06 ` Arnd Bergmann
2023-05-22 13:14 ` Gerd Hoffmann
2023-05-22 10:50 ` [PATCH v5 10/44] firmware: dmi-sysfs: handle HAS_IOPORT=n Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 11/44] gpio: add HAS_IOPORT dependencies Niklas Schnelle
2023-05-23 8:15 ` Bartosz Golaszewski
2023-05-22 10:50 ` [PATCH v5 12/44] hwmon: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 13/44] i2c: " Niklas Schnelle
2023-09-24 21:01 ` Wolfram Sang
2023-10-23 15:36 ` Wolfram Sang
2023-05-22 10:50 ` [PATCH v5 14/44] iio: ad7606: Kconfig: " Niklas Schnelle
2023-05-28 18:55 ` Jonathan Cameron
2023-05-30 9:21 ` Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 15/44] Input: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 16/44] Input: gameport: add ISA and " Niklas Schnelle
2023-05-22 22:16 ` Dmitry Torokhov
2023-05-22 10:50 ` [PATCH v5 17/44] leds: add " Niklas Schnelle
2023-05-25 11:21 ` Lee Jones
2023-05-22 10:50 ` [PATCH v5 18/44] media: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 19/44] misc: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 20/44] mISDN: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 21/44] mpt fusion: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 22/44] net: handle " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 23/44] parport: PC style parport depends on HAS_IOPORT Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 24/44] PCI: Make quirk using inw() depend " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 25/44] PCI/sysfs: Make I/O resource " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 26/44] pcmcia: add HAS_IOPORT dependencies Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 27/44] platform: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 28/44] pnp: " Niklas Schnelle
2023-05-22 11:54 ` Jaroslav Kysela
2023-05-22 10:50 ` [PATCH v5 29/44] power: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 30/44] rtc: " Niklas Schnelle
2023-05-22 13:09 ` Maciej W. Rozycki
2023-06-06 21:35 ` (subset) " Alexandre Belloni
2023-07-04 8:06 ` Geert Uytterhoeven
2023-07-04 11:25 ` Arnd Bergmann
2023-07-04 12:46 ` Geert Uytterhoeven
2023-05-22 10:50 ` [PATCH v5 31/44] scsi: " Niklas Schnelle
2023-05-22 22:28 ` Martin K. Petersen
2023-05-23 7:26 ` Niklas Schnelle
2023-06-01 0:00 ` Martin K. Petersen
2023-05-22 10:50 ` [PATCH v5 32/44] sound: " Niklas Schnelle
2023-05-22 11:55 ` Jaroslav Kysela
2023-05-22 11:59 ` Takashi Iwai
2023-05-22 13:54 ` Niklas Schnelle
2023-05-22 14:44 ` Takashi Iwai
2023-05-22 10:50 ` [PATCH v5 33/44] speakup: add HAS_IOPORT dependency for SPEAKUP_SERIALIO Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 34/44] staging: add HAS_IOPORT dependencies Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 35/44] tty: serial: handle " Niklas Schnelle
2023-05-30 14:39 ` Greg Kroah-Hartman
2023-05-22 10:50 ` [PATCH v5 36/44] usb: add " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 37/44] usb: uhci: handle " Niklas Schnelle
2023-05-22 13:57 ` Alan Stern
2023-05-22 10:50 ` Niklas Schnelle [this message]
2023-05-29 14:34 ` [PATCH v5 38/44] usb: pci-quirks: " Greg Kroah-Hartman
2023-05-22 10:50 ` [PATCH v5 39/44] vgacon: add " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 40/44] fbdev: " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 41/44] video: Handle " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 42/44] watchdog: add " Niklas Schnelle
2023-05-22 10:50 ` [PATCH v5 43/44] wireless: " Niklas Schnelle
2023-05-24 7:38 ` Kalle Valo
2023-05-25 12:01 ` Niklas Schnelle
2023-05-25 16:08 ` [v5,43/44] wifi: " Kalle Valo
2023-05-22 10:50 ` [PATCH v5 44/44] asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n Niklas Schnelle
2023-05-22 11:29 ` [PATCH v5 00/44] treewide: " Arnd Bergmann
2023-06-27 9:12 ` Niklas Schnelle
2023-06-27 12:53 ` Arnd Bergmann
2023-06-29 13:26 ` Niklas Schnelle
2023-06-08 1:42 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230522105049.1467313-39-schnelle@linux.ibm.com \
--to=schnelle@linux.ibm.com \
--cc=aou@eecs.berkeley.edu \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=bhelgaas@google.com \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=mchehab@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=rafael@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox