public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jack Zhu <jack.zhu@starfivetech.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Maxime Ripard <mripard@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <jack.zhu@starfivetech.com>,
	<changhuang.liang@starfivetech.com>
Subject: [PATCH v2 3/5] media: cadence: Add operation on reset
Date: Tue, 23 May 2023 16:56:24 +0800	[thread overview]
Message-ID: <20230523085626.3295-4-jack.zhu@starfivetech.com> (raw)
In-Reply-To: <20230523085626.3295-1-jack.zhu@starfivetech.com>

Add operation on reset for Cadence MIPI-CSI2 RX Controller.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com>
---
 drivers/media/platform/cadence/cdns-csi2rx.c | 40 +++++++++++++++++---
 1 file changed, 35 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 9755d1c8ceb9..c9b80ac5cca5 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -13,6 +13,7 @@
 #include <linux/of_graph.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 
 #include <media/v4l2-ctrls.h>
@@ -68,6 +69,9 @@ struct csi2rx_priv {
 	struct clk			*sys_clk;
 	struct clk			*p_clk;
 	struct clk			*pixel_clk[CSI2RX_STREAMS_MAX];
+	struct reset_control		*sys_rst;
+	struct reset_control		*p_rst;
+	struct reset_control		*pixel_rst[CSI2RX_STREAMS_MAX];
 	struct phy			*dphy;
 
 	u8				lanes[CSI2RX_LANES_MAX];
@@ -112,6 +116,7 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
 	if (ret)
 		return ret;
 
+	reset_control_deassert(csi2rx->p_rst);
 	csi2rx_reset(csi2rx);
 
 	reg = csi2rx->num_lanes << 8;
@@ -154,6 +159,8 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
 		if (ret)
 			goto err_disable_pixclk;
 
+		reset_control_deassert(csi2rx->pixel_rst[i]);
+
 		writel(CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF,
 		       csi2rx->base + CSI2RX_STREAM_CFG_REG(i));
 
@@ -169,13 +176,16 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
 	if (ret)
 		goto err_disable_pixclk;
 
+	reset_control_deassert(csi2rx->sys_rst);
 	clk_disable_unprepare(csi2rx->p_clk);
 
 	return 0;
 
 err_disable_pixclk:
-	for (; i > 0; i--)
+	for (; i > 0; i--) {
+		reset_control_assert(csi2rx->pixel_rst[i - 1]);
 		clk_disable_unprepare(csi2rx->pixel_clk[i - 1]);
+	}
 
 err_disable_pclk:
 	clk_disable_unprepare(csi2rx->p_clk);
@@ -188,14 +198,17 @@ static void csi2rx_stop(struct csi2rx_priv *csi2rx)
 	unsigned int i;
 
 	clk_prepare_enable(csi2rx->p_clk);
+	reset_control_assert(csi2rx->sys_rst);
 	clk_disable_unprepare(csi2rx->sys_clk);
 
 	for (i = 0; i < csi2rx->max_streams; i++) {
 		writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
 
+		reset_control_assert(csi2rx->pixel_rst[i]);
 		clk_disable_unprepare(csi2rx->pixel_clk[i]);
 	}
 
+	reset_control_assert(csi2rx->p_rst);
 	clk_disable_unprepare(csi2rx->p_clk);
 
 	if (v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, false))
@@ -299,6 +312,16 @@ static int csi2rx_get_resources(struct csi2rx_priv *csi2rx,
 		return PTR_ERR(csi2rx->p_clk);
 	}
 
+	csi2rx->sys_rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
+								    "sys");
+	if (IS_ERR(csi2rx->sys_rst))
+		return PTR_ERR(csi2rx->sys_rst);
+
+	csi2rx->p_rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
+								  "reg_bank");
+	if (IS_ERR(csi2rx->p_rst))
+		return PTR_ERR(csi2rx->p_rst);
+
 	csi2rx->dphy = devm_phy_optional_get(&pdev->dev, "dphy");
 	if (IS_ERR(csi2rx->dphy)) {
 		dev_err(&pdev->dev, "Couldn't get external D-PHY\n");
@@ -349,14 +372,21 @@ static int csi2rx_get_resources(struct csi2rx_priv *csi2rx,
 	}
 
 	for (i = 0; i < csi2rx->max_streams; i++) {
-		char clk_name[16];
+		char name[16];
 
-		snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i);
-		csi2rx->pixel_clk[i] = devm_clk_get(&pdev->dev, clk_name);
+		snprintf(name, sizeof(name), "pixel_if%u_clk", i);
+		csi2rx->pixel_clk[i] = devm_clk_get(&pdev->dev, name);
 		if (IS_ERR(csi2rx->pixel_clk[i])) {
-			dev_err(&pdev->dev, "Couldn't get clock %s\n", clk_name);
+			dev_err(&pdev->dev, "Couldn't get clock %s\n", name);
 			return PTR_ERR(csi2rx->pixel_clk[i]);
 		}
+
+		snprintf(name, sizeof(name), "pixel_if%u", i);
+		csi2rx->pixel_rst[i] =
+			devm_reset_control_get_optional_exclusive(&pdev->dev,
+								  name);
+		if (IS_ERR(csi2rx->pixel_rst[i]))
+			return PTR_ERR(csi2rx->pixel_rst[i]);
 	}
 
 	return 0;
-- 
2.34.1


  parent reply	other threads:[~2023-05-23  8:56 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-23  8:56 [PATCH v2 0/5] Add support for external dphy Jack Zhu
2023-05-23  8:56 ` [PATCH v2 1/5] media: dt-bindings: cadence-csi2rx: Convert to DT schema Jack Zhu
2023-05-23  8:56 ` [PATCH v2 2/5] media: dt-bindings: cadence-csi2rx: Add resets property Jack Zhu
2023-05-23  8:56 ` Jack Zhu [this message]
2023-05-23  8:56 ` [PATCH v2 4/5] media: cadence: Add support for external dphy Jack Zhu
2023-05-23  8:56 ` [PATCH v2 5/5] media: cadence: Add support for JH7110 SoC Jack Zhu
2023-06-20 10:09 ` [PATCH v2 0/5] Add support for external dphy Jack Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230523085626.3295-4-jack.zhu@starfivetech.com \
    --to=jack.zhu@starfivetech.com \
    --cc=changhuang.liang@starfivetech.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox