From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v3 09/15] arm64: dts: qcom: sc8180x: Add QUPs
Date: Tue, 30 May 2023 21:54:48 +0530 [thread overview]
Message-ID: <20230530162454.51708-10-vkoul@kernel.org> (raw)
In-Reply-To: <20230530162454.51708-1-vkoul@kernel.org>
This patch adds qup instances and i2c, spi, serial ports
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 859 ++++++++++++++++++++++++++
1 file changed, 859 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index da7c08e70540..b50673b7c147 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -780,6 +780,865 @@ gcc: clock-controller@100000 {
"sleep_clk";
};
+ qupv3_id_0: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x6000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ iommus = <&apps_smmu 0x4c3 0>;
+ status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00880000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@880000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00880000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c1: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00884000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart1: serial@884000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00884000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00888000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart2: serial@888000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00888000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c3: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart3: serial@88c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x0088c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c4: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial@890000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00890000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart5: serial@894000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00894000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c6: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00898000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart6: serial@898000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00898000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c7: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi7: spi@89c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0089c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart7: serial@89c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x0089c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+ };
+
+ qupv3_id_1: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x00ac0000 0x0 0x6000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ iommus = <&apps_smmu 0x603 0>;
+ status = "disabled";
+
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi8: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a80000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart8: serial@a80000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a80000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi9: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a84000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart9: serial@a84000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x00a84000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi10: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a88000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart10: serial@a88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a88000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi11: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart11: serial@a8c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi12: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a90000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart12: serial@a90000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a90000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c16: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi16: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a94000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart16: serial@a94000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a94000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+ };
+
+ qupv3_id_2: geniqup@cc0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x00cc0000 0x0 0x6000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ iommus = <&apps_smmu 0x7a3 0>;
+ status = "disabled";
+
+ i2c17: i2c@c80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c80000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi17: spi@c80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00c80000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart17: serial@c80000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00c80000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c18: i2c@c84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c84000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi18: spi@c84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00c84000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart18: serial@c84000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00c84000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c19: i2c@c88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c88000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi19: spi@c88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00c88000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart19: serial@c88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00c88000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c13: i2c@c8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c8c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi13: spi@c8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00c8c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart13: serial@c8c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00c8c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c14: i2c@c90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c90000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi14: spi@c90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00c90000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart14: serial@c90000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00c90000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c15: i2c@c94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c94000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi15: spi@c94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00c94000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart15: serial@c94000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00c94000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+ };
+
config_noc: interconnect@1500000 {
compatible = "qcom,sc8180x-config-noc";
reg = <0 0x01500000 0 0x7400>;
--
2.40.1
next prev parent reply other threads:[~2023-05-30 16:26 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 16:24 [PATCH v3 00/15] Introduce the SC8180x devices Vinod Koul
2023-05-30 16:24 ` [PATCH v3 01/15] dt-bindings: PCI: qcom: Fix sc8180x clocks and interrupts Vinod Koul
2023-05-31 8:19 ` Krzysztof Kozlowski
2023-06-01 7:21 ` Vinod Koul
2023-06-01 7:25 ` Krzysztof Kozlowski
2023-06-01 7:26 ` Krzysztof Kozlowski
2023-05-30 16:24 ` [PATCH v3 02/15] dt-bindings: usb: qcom,dwc3: Add SC8180x binding Vinod Koul
2023-05-31 8:19 ` Krzysztof Kozlowski
2023-05-30 16:24 ` [PATCH v3 03/15] dt-bindings: interconnect: split SC8180x to own schema Vinod Koul
2023-05-31 8:22 ` Krzysztof Kozlowski
2023-06-01 7:23 ` Vinod Koul
2023-06-01 7:26 ` Krzysztof Kozlowski
2023-05-30 16:24 ` [PATCH v3 04/15] scsi: ufs: dt-bindings: Add SC8180x binding Vinod Koul
2023-05-31 8:24 ` Krzysztof Kozlowski
2023-05-30 16:24 ` [PATCH v3 05/15] dt-bindings: qcom,pdc: Add SC8180x compatible Vinod Koul
2023-05-31 8:24 ` Krzysztof Kozlowski
2023-05-30 16:24 ` [PATCH v3 06/15] arm64: dts: qcom: Introduce the SC8180x platform Vinod Koul
2023-05-30 16:24 ` [PATCH v3 07/15] arm64: dts: qcom: sc8180x: Add interconnects and lmh Vinod Koul
2023-05-31 8:26 ` Krzysztof Kozlowski
2023-06-01 7:17 ` Vinod Koul
2023-06-01 13:27 ` Bjorn Andersson
2023-06-01 15:27 ` Krzysztof Kozlowski
2023-06-10 16:24 ` Bjorn Andersson
2023-05-30 16:24 ` [PATCH v3 08/15] arm64: dts: qcom: sc8180x: Add thermal zones Vinod Koul
2023-05-30 16:24 ` Vinod Koul [this message]
2023-05-30 16:24 ` [PATCH v3 10/15] arm64: dts: qcom: sc8180x: Add PCIe instances Vinod Koul
2023-05-30 16:24 ` [PATCH v3 11/15] arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes Vinod Koul
2023-05-30 16:24 ` [PATCH v3 12/15] arm64: dts: qcom: sc8180x: Add display and gpu nodes Vinod Koul
2023-05-30 16:24 ` [PATCH v3 13/15] arm64: dts: qcom: sc8180x: Add pmics Vinod Koul
2023-06-07 19:31 ` Rob Herring
2023-05-30 16:24 ` [PATCH v3 14/15] arm64: dts: qcom: sc8180x: Introduce Primus Vinod Koul
2023-05-30 16:24 ` [PATCH v3 15/15] arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G Vinod Koul
2023-05-30 17:22 ` (subset) [PATCH v3 00/15] Introduce the SC8180x devices Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530162454.51708-10-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox