[PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[Naresh Solanki]

The previous version of this driver included wildcards in file names
and descriptions. This patch renames the driver to only support MAX5970
and MAX5978, which are the only chips that the driver actually supports.

Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
 drivers/mfd/Kconfig                        |  4 ++--
 drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
 include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
 3 files changed, 19 insertions(+), 19 deletions(-)
 rename include/linux/mfd/{max597x.h => max5970.h} (92%)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e90463c4441c..71231388e03c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -266,8 +266,8 @@ config MFD_MADERA_SPI
 	  Support for the Cirrus Logic Madera platform audio SoC
 	  core functionality controlled via SPI.
 
-config MFD_MAX597X
-	tristate "Maxim 597x power switch and monitor"
+config MFD_MAX5970
+	tristate "Maxim 5970/5978 power switch and monitor"
 	depends on (I2C && OF)
 	select MFD_SIMPLE_MFD_I2C
 	help
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 20782b4dd172..1f1c007560d8 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -72,22 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
 	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
 };
 
-static const struct mfd_cell max597x_cells[] = {
-	{ .name = "max597x-regulator", },
-	{ .name = "max597x-iio", },
-	{ .name = "max597x-led", },
+static const struct mfd_cell max5970_cells[] = {
+	{ .name = "max5970-regulator", },
+	{ .name = "max5970-iio", },
+	{ .name = "max5970-led", },
 };
 
-static const struct simple_mfd_data maxim_max597x = {
-	.mfd_cell = max597x_cells,
-	.mfd_cell_size = ARRAY_SIZE(max597x_cells),
+static const struct simple_mfd_data maxim_max5970 = {
+	.mfd_cell = max5970_cells,
+	.mfd_cell_size = ARRAY_SIZE(max5970_cells),
 };
 
 static const struct of_device_id simple_mfd_i2c_of_match[] = {
 	{ .compatible = "kontron,sl28cpld" },
 	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
-	{ .compatible = "maxim,max5970", .data = &maxim_max597x},
-	{ .compatible = "maxim,max5978", .data = &maxim_max597x},
+	{ .compatible = "maxim,max5970", .data = &maxim_max5970},
+	{ .compatible = "maxim,max5978", .data = &maxim_max5970},
 	{}
 };
 MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max5970.h
similarity index 92%
rename from include/linux/mfd/max597x.h
rename to include/linux/mfd/max5970.h
index a850b2e02e6a..762a7d40c843 100644
--- a/include/linux/mfd/max597x.h
+++ b/include/linux/mfd/max5970.h
@@ -7,25 +7,25 @@
  * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
  */
 
-#ifndef _MFD_MAX597X_H
-#define _MFD_MAX597X_H
+#ifndef _MFD_MAX5970_H
+#define _MFD_MAX5970_H
 
 #include <linux/regmap.h>
 
 #define MAX5970_NUM_SWITCHES 2
 #define MAX5978_NUM_SWITCHES 1
-#define MAX597X_NUM_LEDS     4
+#define MAX5970_NUM_LEDS     4
 
-struct max597x_data {
+struct max5970_data {
 	int num_switches;
 	u32 irng[MAX5970_NUM_SWITCHES];
 	u32 mon_rng[MAX5970_NUM_SWITCHES];
 	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
 };
 
-enum max597x_chip_type {
-	MAX597x_TYPE_MAX5978 = 1,
-	MAX597x_TYPE_MAX5970,
+enum max5970_chip_type {
+	TYPE_MAX5978 = 1,
+	TYPE_MAX5970,
 };
 
 #define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
@@ -93,4 +93,4 @@ enum max597x_chip_type {
 #define MAX_REGISTERS			0x49
 #define ADC_MASK			0x3FF
 
-#endif				/* _MFD_MAX597X_H */
+#endif				/* _MFD_MAX5970_H */

base-commit: b4c288cfd2f84c44994330c408e14645d45dee5b
-- 
2.39.1

[PATCH 2/2] regulator: max5970: Rename driver and remove wildcard

[Naresh Solanki]

The previous version of this driver included wildcards in file names and
descriptions. This patch renames the driver to only support MAX5970 and
MAX5978, which are the only chips that the driver actually supports.

Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
 drivers/regulator/Kconfig                     |   6 +-
 drivers/regulator/Makefile                    |   2 +-
 ...ax597x-regulator.c => max5970-regulator.c} | 126 +++++++++---------
 3 files changed, 67 insertions(+), 67 deletions(-)
 rename drivers/regulator/{max597x-regulator.c => max5970-regulator.c} (76%)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index aae28d0a489c..36465aeb4e21 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -546,11 +546,11 @@ config REGULATOR_MAX1586
 	  regulator via I2C bus. The provided regulator is suitable
 	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 
-config REGULATOR_MAX597X
-	tristate "Maxim 597x power switch and monitor"
+config REGULATOR_MAX5970
+	tristate "Maxim 5970/5978 power switch and monitor"
 	depends on I2C
 	depends on OF
-	depends on MFD_MAX597X
+	depends on MFD_MAX5970
 	help
 	  This driver controls a Maxim 5970/5978 switch via I2C bus.
 	  The MAX5970/5978 is a smart switch with no output regulation, but
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ee383d8fc835..aed1b7c2eb78 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -67,7 +67,7 @@ obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
 obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
-obj-$(CONFIG_REGULATOR_MAX597X) += max597x-regulator.o
+obj-$(CONFIG_REGULATOR_MAX5970) += max5970-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
diff --git a/drivers/regulator/max597x-regulator.c b/drivers/regulator/max5970-regulator.c
similarity index 76%
rename from drivers/regulator/max597x-regulator.c
rename to drivers/regulator/max5970-regulator.c
index 648e3641885a..08c8eb7b1ed6 100644
--- a/drivers/regulator/max597x-regulator.c
+++ b/drivers/regulator/max5970-regulator.c
@@ -20,19 +20,19 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/platform_device.h>
 
-#include <linux/mfd/max597x.h>
+#include <linux/mfd/max5970.h>
 
-struct max597x_regulator {
+struct max5970_regulator {
 	int num_switches, mon_rng, irng, shunt_micro_ohms, lim_uA;
 	struct regmap *regmap;
 };
 
-enum max597x_regulator_id {
-	MAX597X_SW0,
-	MAX597X_SW1,
+enum max5970_regulator_id {
+	MAX5970_SW0,
+	MAX5970_SW1,
 };
 
-static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
+static int max5970_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
 {
 	int ret, reg;
 
@@ -54,11 +54,11 @@ static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
 	return 0;
 }
 
-static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
 			  bool enable, bool overvoltage)
 {
 	int off_h, off_l, reg, ret;
-	struct max597x_regulator *data = rdev_get_drvdata(rdev);
+	struct max5970_regulator *data = rdev_get_drvdata(rdev);
 	int channel = rdev_get_id(rdev);
 
 	if (overvoltage) {
@@ -96,7 +96,7 @@ static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
 	return 0;
 }
 
-static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
 			   bool enable)
 {
 	int ret;
@@ -108,14 +108,14 @@ static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
 	if ((lim_uV && !enable) || (!lim_uV && enable))
 		return -EINVAL;
 
-	ret = max597x_uvp_ovp_check_mode(rdev, severity);
+	ret = max5970_uvp_ovp_check_mode(rdev, severity);
 	if (ret)
 		return ret;
 
-	return max597x_set_vp(rdev, lim_uV, severity, enable, false);
+	return max5970_set_vp(rdev, lim_uV, severity, enable, false);
 }
 
-static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
 			   bool enable)
 {
 	int ret;
@@ -127,20 +127,20 @@ static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
 	if ((lim_uV && !enable) || (!lim_uV && enable))
 		return -EINVAL;
 
-	ret = max597x_uvp_ovp_check_mode(rdev, severity);
+	ret = max5970_uvp_ovp_check_mode(rdev, severity);
 	if (ret)
 		return ret;
 
-	return max597x_set_vp(rdev, lim_uV, severity, enable, true);
+	return max5970_set_vp(rdev, lim_uV, severity, enable, true);
 }
 
-static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
+static int max5970_set_ocp(struct regulator_dev *rdev, int lim_uA,
 			   int severity, bool enable)
 {
 	int val, reg;
 	unsigned int vthst, vthfst;
 
-	struct max597x_regulator *data = rdev_get_drvdata(rdev);
+	struct max5970_regulator *data = rdev_get_drvdata(rdev);
 	int rdev_id = rdev_get_id(rdev);
 	/*
 	 * MAX5970 doesn't has enable control for ocp.
@@ -187,7 +187,7 @@ static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
 	return regmap_write(rdev->regmap, reg, val);
 }
 
-static int max597x_get_status(struct regulator_dev *rdev)
+static int max5970_get_status(struct regulator_dev *rdev)
 {
 	int val, ret;
 
@@ -208,21 +208,21 @@ static int max597x_get_status(struct regulator_dev *rdev)
 	return REGULATOR_STATUS_OFF;
 }
 
-static const struct regulator_ops max597x_switch_ops = {
+static const struct regulator_ops max5970_switch_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
-	.get_status = max597x_get_status,
-	.set_over_voltage_protection = max597x_set_ovp,
-	.set_under_voltage_protection = max597x_set_uvp,
-	.set_over_current_protection = max597x_set_ocp,
+	.get_status = max5970_get_status,
+	.set_over_voltage_protection = max5970_set_ovp,
+	.set_under_voltage_protection = max5970_set_uvp,
+	.set_over_current_protection = max5970_set_ocp,
 };
 
-static int max597x_dt_parse(struct device_node *np,
+static int max5970_dt_parse(struct device_node *np,
 			    const struct regulator_desc *desc,
 			    struct regulator_config *cfg)
 {
-	struct max597x_regulator *data = cfg->driver_data;
+	struct max5970_regulator *data = cfg->driver_data;
 	int ret = 0;
 
 	ret =
@@ -236,26 +236,26 @@ static int max597x_dt_parse(struct device_node *np,
 
 }
 
-#define MAX597X_SWITCH(_ID, _ereg, _chan, _supply) {     \
+#define MAX5970_SWITCH(_ID, _ereg, _chan, _supply) {     \
 	.name            = #_ID,                         \
 	.of_match        = of_match_ptr(#_ID),           \
-	.ops             = &max597x_switch_ops,          \
+	.ops             = &max5970_switch_ops,          \
 	.regulators_node = of_match_ptr("regulators"),   \
 	.type            = REGULATOR_VOLTAGE,            \
-	.id              = MAX597X_##_ID,                \
+	.id              = MAX5970_##_ID,                \
 	.owner           = THIS_MODULE,                  \
 	.supply_name     = _supply,                      \
 	.enable_reg      = _ereg,                        \
 	.enable_mask     = CHXEN((_chan)),               \
-	.of_parse_cb	 = max597x_dt_parse,		 \
+	.of_parse_cb	 = max5970_dt_parse,		 \
 }
 
 static const struct regulator_desc regulators[] = {
-	MAX597X_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
-	MAX597X_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
+	MAX5970_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
+	MAX5970_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
 };
 
-static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
+static int max5970_regmap_read_clear(struct regmap *map, unsigned int reg,
 				     unsigned int *val)
 {
 	int ret;
@@ -270,14 +270,14 @@ static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
 	return 0;
 }
 
-static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
+static int max5970_irq_handler(int irq, struct regulator_irq_data *rid,
 			       unsigned long *dev_mask)
 {
 	struct regulator_err_state *stat;
-	struct max597x_regulator *d = (struct max597x_regulator *)rid->data;
+	struct max5970_regulator *d = (struct max5970_regulator *)rid->data;
 	int val, ret, i;
 
-	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
+	ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;
 
@@ -302,7 +302,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
 		}
 	}
 
-	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
+	ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;
 
@@ -320,7 +320,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
 		}
 	}
 
-	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
+	ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;
 
@@ -357,7 +357,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
 	return 0;
 }
 
-static int max597x_adc_range(struct regmap *regmap, const int ch,
+static int max5970_adc_range(struct regmap *regmap, const int ch,
 			     u32 *irng, u32 *mon_rng)
 {
 	unsigned int reg;
@@ -391,14 +391,14 @@ static int max597x_adc_range(struct regmap *regmap, const int ch,
 	return 0;
 }
 
-static int max597x_setup_irq(struct device *dev,
+static int max5970_setup_irq(struct device *dev,
 			     int irq,
 			     struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES],
-			     int num_switches, struct max597x_regulator *data)
+			     int num_switches, struct max5970_regulator *data)
 {
-	struct regulator_irq_desc max597x_notif = {
-		.name = "max597x-irq",
-		.map_event = max597x_irq_handler,
+	struct regulator_irq_desc max5970_notif = {
+		.name = "max5970-irq",
+		.map_event = max5970_irq_handler,
 		.data = data,
 	};
 	int errs = REGULATOR_ERROR_UNDER_VOLTAGE |
@@ -410,7 +410,7 @@ static int max597x_setup_irq(struct device *dev,
 	void *irq_helper;
 
 	/* Register notifiers - can fail if IRQ is not given */
-	irq_helper = devm_regulator_irq_helper(dev, &max597x_notif,
+	irq_helper = devm_regulator_irq_helper(dev, &max5970_notif,
 					       irq, 0, errs, NULL,
 					       &rdevs[0], num_switches);
 	if (IS_ERR(irq_helper)) {
@@ -423,11 +423,11 @@ static int max597x_setup_irq(struct device *dev,
 	return 0;
 }
 
-static int max597x_regulator_probe(struct platform_device *pdev)
+static int max5970_regulator_probe(struct platform_device *pdev)
 {
-	struct max597x_data *max597x;
+	struct max5970_data *max5970;
 	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	struct max597x_regulator *data;
+	struct max5970_regulator *data;
 	struct i2c_client *i2c = to_i2c_client(pdev->dev.parent);
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
@@ -438,25 +438,25 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 	if (!regmap)
 		return -EPROBE_DEFER;
 
-	max597x = devm_kzalloc(&i2c->dev, sizeof(struct max597x_data), GFP_KERNEL);
-	if (!max597x)
+	max5970 = devm_kzalloc(&i2c->dev, sizeof(struct max5970_data), GFP_KERNEL);
+	if (!max5970)
 		return -ENOMEM;
 
-	i2c_set_clientdata(i2c, max597x);
+	i2c_set_clientdata(i2c, max5970);
 
 	if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5978"))
-		max597x->num_switches = MAX597x_TYPE_MAX5978;
+		max5970->num_switches = MAX5978_NUM_SWITCHES;
 	else if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5970"))
-		max597x->num_switches = MAX597x_TYPE_MAX5970;
+		max5970->num_switches = MAX5970_NUM_SWITCHES;
 	else
 		return -ENODEV;
 
-	i2c_set_clientdata(i2c, max597x);
-	num_switches = max597x->num_switches;
+	i2c_set_clientdata(i2c, max5970);
+	num_switches = max5970->num_switches;
 
 	for (i = 0; i < num_switches; i++) {
 		data =
-		    devm_kzalloc(&i2c->dev, sizeof(struct max597x_regulator),
+		    devm_kzalloc(&i2c->dev, sizeof(struct max5970_regulator),
 				 GFP_KERNEL);
 		if (!data)
 			return -ENOMEM;
@@ -464,12 +464,12 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 		data->num_switches = num_switches;
 		data->regmap = regmap;
 
-		ret = max597x_adc_range(regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
+		ret = max5970_adc_range(regmap, i, &max5970->irng[i], &max5970->mon_rng[i]);
 		if (ret < 0)
 			return ret;
 
-		data->irng = max597x->irng[i];
-		data->mon_rng = max597x->mon_rng[i];
+		data->irng = max5970->irng[i];
+		data->mon_rng = max5970->mon_rng[i];
 
 		config.dev = &i2c->dev;
 		config.driver_data = (void *)data;
@@ -482,12 +482,12 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 			return PTR_ERR(rdev);
 		}
 		rdevs[i] = rdev;
-		max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
+		max5970->shunt_micro_ohms[i] = data->shunt_micro_ohms;
 	}
 
 	if (i2c->irq) {
 		ret =
-		    max597x_setup_irq(&i2c->dev, i2c->irq, rdevs, num_switches,
+		    max5970_setup_irq(&i2c->dev, i2c->irq, rdevs, num_switches,
 				      data);
 		if (ret) {
 			dev_err(&i2c->dev, "IRQ setup failed");
@@ -498,14 +498,14 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static struct platform_driver max597x_regulator_driver = {
+static struct platform_driver max5970_regulator_driver = {
 	.driver = {
-		.name = "max597x-regulator",
+		.name = "max5970-regulator",
 	},
-	.probe = max597x_regulator_probe,
+	.probe = max5970_regulator_probe,
 };
 
-module_platform_driver(max597x_regulator_driver);
+module_platform_driver(max5970_regulator_driver);
 
 
 MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
-- 
2.39.1

Re: [PATCH 2/2] regulator: max5970: Rename driver and remove wildcard

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 327 bytes --]

On Thu, Apr 27, 2023 at 01:30:46PM +0200, Naresh Solanki wrote:
> The previous version of this driver included wildcards in file names and
> descriptions. This patch renames the driver to only support MAX5970 and
> MAX5978, which are the only chips that the driver actually supports.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/2] regulator: max5970: Rename driver and remove wildcard

[Lee Jones]

On Thu, 27 Apr 2023, Naresh Solanki wrote:

> The previous version of this driver included wildcards in file names and
> descriptions. This patch renames the driver to only support MAX5970 and
> MAX5978, which are the only chips that the driver actually supports.
> 
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ---
>  drivers/regulator/Kconfig                     |   6 +-
>  drivers/regulator/Makefile                    |   2 +-
>  ...ax597x-regulator.c => max5970-regulator.c} | 126 +++++++++---------
>  3 files changed, 67 insertions(+), 67 deletions(-)
>  rename drivers/regulator/{max597x-regulator.c => max5970-regulator.c} (76%)

This does not apply cleanly.  Rather than mess you around, I'll apply
the MFD driver and provide a PR for Mark.  Perhaps this will apply to
the regulator tree.

Testing now - please stand-by.

-- 
Lee Jones [李琼斯]

Re: [PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[Naresh Solanki]

Hi Lee,

I hope this email finds you well. I am writing to inquire about the 
status of my patch.

The purpose of this patch set was to rename the driver to remove the 
wildcard and make it specific to avoid confusion with different similar 
devices. I want to emphasize that this patch set does not include any 
functional changes.

I would appreciate it if you could kindly provide an update on the 
status. Please let me know if there is anything else you need from my 
end to help move things forward.

Thank you for your time and attention.

Best regards,
Naresh Solanki

On 27-04-2023 05:00 pm, Naresh Solanki wrote:
> The previous version of this driver included wildcards in file names
> and descriptions. This patch renames the driver to only support MAX5970
> and MAX5978, which are the only chips that the driver actually supports.
> 
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ---
>   drivers/mfd/Kconfig                        |  4 ++--
>   drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
>   include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
>   3 files changed, 19 insertions(+), 19 deletions(-)
>   rename include/linux/mfd/{max597x.h => max5970.h} (92%)
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index e90463c4441c..71231388e03c 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -266,8 +266,8 @@ config MFD_MADERA_SPI
>   	  Support for the Cirrus Logic Madera platform audio SoC
>   	  core functionality controlled via SPI.
>   
> -config MFD_MAX597X
> -	tristate "Maxim 597x power switch and monitor"
> +config MFD_MAX5970
> +	tristate "Maxim 5970/5978 power switch and monitor"
>   	depends on (I2C && OF)
>   	select MFD_SIMPLE_MFD_I2C
>   	help
> diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
> index 20782b4dd172..1f1c007560d8 100644
> --- a/drivers/mfd/simple-mfd-i2c.c
> +++ b/drivers/mfd/simple-mfd-i2c.c
> @@ -72,22 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
>   	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
>   };
>   
> -static const struct mfd_cell max597x_cells[] = {
> -	{ .name = "max597x-regulator", },
> -	{ .name = "max597x-iio", },
> -	{ .name = "max597x-led", },
> +static const struct mfd_cell max5970_cells[] = {
> +	{ .name = "max5970-regulator", },
> +	{ .name = "max5970-iio", },
> +	{ .name = "max5970-led", },
>   };
>   
> -static const struct simple_mfd_data maxim_max597x = {
> -	.mfd_cell = max597x_cells,
> -	.mfd_cell_size = ARRAY_SIZE(max597x_cells),
> +static const struct simple_mfd_data maxim_max5970 = {
> +	.mfd_cell = max5970_cells,
> +	.mfd_cell_size = ARRAY_SIZE(max5970_cells),
>   };
>   
>   static const struct of_device_id simple_mfd_i2c_of_match[] = {
>   	{ .compatible = "kontron,sl28cpld" },
>   	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
> -	{ .compatible = "maxim,max5970", .data = &maxim_max597x},
> -	{ .compatible = "maxim,max5978", .data = &maxim_max597x},
> +	{ .compatible = "maxim,max5970", .data = &maxim_max5970},
> +	{ .compatible = "maxim,max5978", .data = &maxim_max5970},
>   	{}
>   };
>   MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
> diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max5970.h
> similarity index 92%
> rename from include/linux/mfd/max597x.h
> rename to include/linux/mfd/max5970.h
> index a850b2e02e6a..762a7d40c843 100644
> --- a/include/linux/mfd/max597x.h
> +++ b/include/linux/mfd/max5970.h
> @@ -7,25 +7,25 @@
>    * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
>    */
>   
> -#ifndef _MFD_MAX597X_H
> -#define _MFD_MAX597X_H
> +#ifndef _MFD_MAX5970_H
> +#define _MFD_MAX5970_H
>   
>   #include <linux/regmap.h>
>   
>   #define MAX5970_NUM_SWITCHES 2
>   #define MAX5978_NUM_SWITCHES 1
> -#define MAX597X_NUM_LEDS     4
> +#define MAX5970_NUM_LEDS     4
>   
> -struct max597x_data {
> +struct max5970_data {
>   	int num_switches;
>   	u32 irng[MAX5970_NUM_SWITCHES];
>   	u32 mon_rng[MAX5970_NUM_SWITCHES];
>   	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
>   };
>   
> -enum max597x_chip_type {
> -	MAX597x_TYPE_MAX5978 = 1,
> -	MAX597x_TYPE_MAX5970,
> +enum max5970_chip_type {
> +	TYPE_MAX5978 = 1,
> +	TYPE_MAX5970,
>   };
>   
>   #define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
> @@ -93,4 +93,4 @@ enum max597x_chip_type {
>   #define MAX_REGISTERS			0x49
>   #define ADC_MASK			0x3FF
>   
> -#endif				/* _MFD_MAX597X_H */
> +#endif				/* _MFD_MAX5970_H */
> 
> base-commit: b4c288cfd2f84c44994330c408e14645d45dee5b

Re: [PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[Lee Jones]

On Thu, 04 May 2023, Naresh Solanki wrote:

> Hi Lee,
> 
> I hope this email finds you well. I am writing to inquire about the status
> of my patch.
> 
> The purpose of this patch set was to rename the driver to remove the
> wildcard and make it specific to avoid confusion with different similar
> devices. I want to emphasize that this patch set does not include any
> functional changes.
> 
> I would appreciate it if you could kindly provide an update on the status.
> Please let me know if there is anything else you need from my end to help
> move things forward.
> 
> Thank you for your time and attention.

Please refrain from top-posting.

If you think your patch has fallen through the gaps (it hasn't) please
submit a [RESEND].

The merge-window has been open for the last 2 weeks.  I'm just ramping
up again on my backlog.

I'll get to you soon.

> On 27-04-2023 05:00 pm, Naresh Solanki wrote:
> > The previous version of this driver included wildcards in file names
> > and descriptions. This patch renames the driver to only support MAX5970
> > and MAX5978, which are the only chips that the driver actually supports.
> > 
> > Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> > ---
> >   drivers/mfd/Kconfig                        |  4 ++--
> >   drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
> >   include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
> >   3 files changed, 19 insertions(+), 19 deletions(-)
> >   rename include/linux/mfd/{max597x.h => max5970.h} (92%)
> > 
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index e90463c4441c..71231388e03c 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -266,8 +266,8 @@ config MFD_MADERA_SPI
> >   	  Support for the Cirrus Logic Madera platform audio SoC
> >   	  core functionality controlled via SPI.
> > -config MFD_MAX597X
> > -	tristate "Maxim 597x power switch and monitor"
> > +config MFD_MAX5970
> > +	tristate "Maxim 5970/5978 power switch and monitor"
> >   	depends on (I2C && OF)
> >   	select MFD_SIMPLE_MFD_I2C
> >   	help
> > diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
> > index 20782b4dd172..1f1c007560d8 100644
> > --- a/drivers/mfd/simple-mfd-i2c.c
> > +++ b/drivers/mfd/simple-mfd-i2c.c
> > @@ -72,22 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
> >   	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
> >   };
> > -static const struct mfd_cell max597x_cells[] = {
> > -	{ .name = "max597x-regulator", },
> > -	{ .name = "max597x-iio", },
> > -	{ .name = "max597x-led", },
> > +static const struct mfd_cell max5970_cells[] = {
> > +	{ .name = "max5970-regulator", },
> > +	{ .name = "max5970-iio", },
> > +	{ .name = "max5970-led", },
> >   };
> > -static const struct simple_mfd_data maxim_max597x = {
> > -	.mfd_cell = max597x_cells,
> > -	.mfd_cell_size = ARRAY_SIZE(max597x_cells),
> > +static const struct simple_mfd_data maxim_max5970 = {
> > +	.mfd_cell = max5970_cells,
> > +	.mfd_cell_size = ARRAY_SIZE(max5970_cells),
> >   };
> >   static const struct of_device_id simple_mfd_i2c_of_match[] = {
> >   	{ .compatible = "kontron,sl28cpld" },
> >   	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
> > -	{ .compatible = "maxim,max5970", .data = &maxim_max597x},
> > -	{ .compatible = "maxim,max5978", .data = &maxim_max597x},
> > +	{ .compatible = "maxim,max5970", .data = &maxim_max5970},
> > +	{ .compatible = "maxim,max5978", .data = &maxim_max5970},
> >   	{}
> >   };
> >   MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
> > diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max5970.h
> > similarity index 92%
> > rename from include/linux/mfd/max597x.h
> > rename to include/linux/mfd/max5970.h
> > index a850b2e02e6a..762a7d40c843 100644
> > --- a/include/linux/mfd/max597x.h
> > +++ b/include/linux/mfd/max5970.h
> > @@ -7,25 +7,25 @@
> >    * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
> >    */
> > -#ifndef _MFD_MAX597X_H
> > -#define _MFD_MAX597X_H
> > +#ifndef _MFD_MAX5970_H
> > +#define _MFD_MAX5970_H
> >   #include <linux/regmap.h>
> >   #define MAX5970_NUM_SWITCHES 2
> >   #define MAX5978_NUM_SWITCHES 1
> > -#define MAX597X_NUM_LEDS     4
> > +#define MAX5970_NUM_LEDS     4
> > -struct max597x_data {
> > +struct max5970_data {
> >   	int num_switches;
> >   	u32 irng[MAX5970_NUM_SWITCHES];
> >   	u32 mon_rng[MAX5970_NUM_SWITCHES];
> >   	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
> >   };
> > -enum max597x_chip_type {
> > -	MAX597x_TYPE_MAX5978 = 1,
> > -	MAX597x_TYPE_MAX5970,
> > +enum max5970_chip_type {
> > +	TYPE_MAX5978 = 1,
> > +	TYPE_MAX5970,
> >   };
> >   #define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
> > @@ -93,4 +93,4 @@ enum max597x_chip_type {
> >   #define MAX_REGISTERS			0x49
> >   #define ADC_MASK			0x3FF
> > -#endif				/* _MFD_MAX597X_H */
> > +#endif				/* _MFD_MAX5970_H */
> > 
> > base-commit: b4c288cfd2f84c44994330c408e14645d45dee5b

-- 
Lee Jones [李琼斯]

Re: [PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[Lee Jones]

On Thu, 27 Apr 2023, Naresh Solanki wrote:

> The previous version of this driver included wildcards in file names
> and descriptions. This patch renames the driver to only support MAX5970
> and MAX5978, which are the only chips that the driver actually supports.

So multiple devices are supported:

  MAX5970  ... AND
  MAX5978  ... thus
  MAX597X  ... does make sense, no?
 
 What are you trying to achieve?

> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ---
>  drivers/mfd/Kconfig                        |  4 ++--
>  drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
>  include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
>  3 files changed, 19 insertions(+), 19 deletions(-)
>  rename include/linux/mfd/{max597x.h => max5970.h} (92%)
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index e90463c4441c..71231388e03c 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -266,8 +266,8 @@ config MFD_MADERA_SPI
>  	  Support for the Cirrus Logic Madera platform audio SoC
>  	  core functionality controlled via SPI.
>  
> -config MFD_MAX597X
> -	tristate "Maxim 597x power switch and monitor"
> +config MFD_MAX5970
> +	tristate "Maxim 5970/5978 power switch and monitor"
>  	depends on (I2C && OF)
>  	select MFD_SIMPLE_MFD_I2C
>  	help
> diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
> index 20782b4dd172..1f1c007560d8 100644
> --- a/drivers/mfd/simple-mfd-i2c.c
> +++ b/drivers/mfd/simple-mfd-i2c.c
> @@ -72,22 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
>  	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
>  };
>  
> -static const struct mfd_cell max597x_cells[] = {
> -	{ .name = "max597x-regulator", },
> -	{ .name = "max597x-iio", },
> -	{ .name = "max597x-led", },
> +static const struct mfd_cell max5970_cells[] = {
> +	{ .name = "max5970-regulator", },
> +	{ .name = "max5970-iio", },
> +	{ .name = "max5970-led", },
>  };
>  
> -static const struct simple_mfd_data maxim_max597x = {
> -	.mfd_cell = max597x_cells,
> -	.mfd_cell_size = ARRAY_SIZE(max597x_cells),
> +static const struct simple_mfd_data maxim_max5970 = {
> +	.mfd_cell = max5970_cells,
> +	.mfd_cell_size = ARRAY_SIZE(max5970_cells),
>  };
>  
>  static const struct of_device_id simple_mfd_i2c_of_match[] = {
>  	{ .compatible = "kontron,sl28cpld" },
>  	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
> -	{ .compatible = "maxim,max5970", .data = &maxim_max597x},
> -	{ .compatible = "maxim,max5978", .data = &maxim_max597x},
> +	{ .compatible = "maxim,max5970", .data = &maxim_max5970},
> +	{ .compatible = "maxim,max5978", .data = &maxim_max5970},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
> diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max5970.h
> similarity index 92%
> rename from include/linux/mfd/max597x.h
> rename to include/linux/mfd/max5970.h
> index a850b2e02e6a..762a7d40c843 100644
> --- a/include/linux/mfd/max597x.h
> +++ b/include/linux/mfd/max5970.h
> @@ -7,25 +7,25 @@
>   * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
>   */
>  
> -#ifndef _MFD_MAX597X_H
> -#define _MFD_MAX597X_H
> +#ifndef _MFD_MAX5970_H
> +#define _MFD_MAX5970_H
>  
>  #include <linux/regmap.h>
>  
>  #define MAX5970_NUM_SWITCHES 2
>  #define MAX5978_NUM_SWITCHES 1
> -#define MAX597X_NUM_LEDS     4
> +#define MAX5970_NUM_LEDS     4
>  
> -struct max597x_data {
> +struct max5970_data {
>  	int num_switches;
>  	u32 irng[MAX5970_NUM_SWITCHES];
>  	u32 mon_rng[MAX5970_NUM_SWITCHES];
>  	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
>  };
>  
> -enum max597x_chip_type {
> -	MAX597x_TYPE_MAX5978 = 1,
> -	MAX597x_TYPE_MAX5970,
> +enum max5970_chip_type {
> +	TYPE_MAX5978 = 1,
> +	TYPE_MAX5970,
>  };
>  
>  #define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
> @@ -93,4 +93,4 @@ enum max597x_chip_type {
>  #define MAX_REGISTERS			0x49
>  #define ADC_MASK			0x3FF
>  
> -#endif				/* _MFD_MAX597X_H */
> +#endif				/* _MFD_MAX5970_H */
> 
> base-commit: b4c288cfd2f84c44994330c408e14645d45dee5b
> -- 
> 2.39.1
> 

-- 
Lee Jones [李琼斯]

Re: [PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[Naresh Solanki]

Hi Lee,

On 18-05-2023 03:44 pm, Lee Jones wrote:
> On Thu, 27 Apr 2023, Naresh Solanki wrote:
> 
>> The previous version of this driver included wildcards in file names
>> and descriptions. This patch renames the driver to only support MAX5970
>> and MAX5978, which are the only chips that the driver actually supports.
> 
> So multiple devices are supported:
> 
>    MAX5970  ... AND
>    MAX5978  ... thus
>    MAX597X  ... does make sense, no?
>   
>   What are you trying to achieve?
Understood. It is important to note that there are indeed other 
unrelated chips in addition to MAX5970 and MAX5978. Examples include 
MAX5971, which is a Single-Port, 40W, IEEE 802.3af/at PSE Controller 
with Integrated MOSFET, and MAX5974A, an Active-Clamped, 
Spread-Spectrum, Current-Mode PWM Controller, among others.

With this change, the intention is to be specific about the chips the 
driver supports. Instead of using wildcards or a broad "MAX597X" 
designation, the patch aims to exclusively support the MAX5970 and 
MAX5978 chips.

> 
>> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
>> ---
>>   drivers/mfd/Kconfig                        |  4 ++--
>>   drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
>>   include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
>>   3 files changed, 19 insertions(+), 19 deletions(-)
>>   rename include/linux/mfd/{max597x.h => max5970.h} (92%)
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index e90463c4441c..71231388e03c 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -266,8 +266,8 @@ config MFD_MADERA_SPI
>>   	  Support for the Cirrus Logic Madera platform audio SoC
>>   	  core functionality controlled via SPI.
>>   
>> -config MFD_MAX597X
>> -	tristate "Maxim 597x power switch and monitor"
>> +config MFD_MAX5970
>> +	tristate "Maxim 5970/5978 power switch and monitor"
>>   	depends on (I2C && OF)
>>   	select MFD_SIMPLE_MFD_I2C
>>   	help
>> diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
>> index 20782b4dd172..1f1c007560d8 100644
>> --- a/drivers/mfd/simple-mfd-i2c.c
>> +++ b/drivers/mfd/simple-mfd-i2c.c
>> @@ -72,22 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
>>   	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
>>   };
>>   
>> -static const struct mfd_cell max597x_cells[] = {
>> -	{ .name = "max597x-regulator", },
>> -	{ .name = "max597x-iio", },
>> -	{ .name = "max597x-led", },
>> +static const struct mfd_cell max5970_cells[] = {
>> +	{ .name = "max5970-regulator", },
>> +	{ .name = "max5970-iio", },
>> +	{ .name = "max5970-led", },
>>   };
>>   
>> -static const struct simple_mfd_data maxim_max597x = {
>> -	.mfd_cell = max597x_cells,
>> -	.mfd_cell_size = ARRAY_SIZE(max597x_cells),
>> +static const struct simple_mfd_data maxim_max5970 = {
>> +	.mfd_cell = max5970_cells,
>> +	.mfd_cell_size = ARRAY_SIZE(max5970_cells),
>>   };
>>   
>>   static const struct of_device_id simple_mfd_i2c_of_match[] = {
>>   	{ .compatible = "kontron,sl28cpld" },
>>   	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
>> -	{ .compatible = "maxim,max5970", .data = &maxim_max597x},
>> -	{ .compatible = "maxim,max5978", .data = &maxim_max597x},
>> +	{ .compatible = "maxim,max5970", .data = &maxim_max5970},
>> +	{ .compatible = "maxim,max5978", .data = &maxim_max5970},
>>   	{}
>>   };
>>   MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
>> diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max5970.h
>> similarity index 92%
>> rename from include/linux/mfd/max597x.h
>> rename to include/linux/mfd/max5970.h
>> index a850b2e02e6a..762a7d40c843 100644
>> --- a/include/linux/mfd/max597x.h
>> +++ b/include/linux/mfd/max5970.h
>> @@ -7,25 +7,25 @@
>>    * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
>>    */
>>   
>> -#ifndef _MFD_MAX597X_H
>> -#define _MFD_MAX597X_H
>> +#ifndef _MFD_MAX5970_H
>> +#define _MFD_MAX5970_H
>>   
>>   #include <linux/regmap.h>
>>   
>>   #define MAX5970_NUM_SWITCHES 2
>>   #define MAX5978_NUM_SWITCHES 1
>> -#define MAX597X_NUM_LEDS     4
>> +#define MAX5970_NUM_LEDS     4
>>   
>> -struct max597x_data {
>> +struct max5970_data {
>>   	int num_switches;
>>   	u32 irng[MAX5970_NUM_SWITCHES];
>>   	u32 mon_rng[MAX5970_NUM_SWITCHES];
>>   	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
>>   };
>>   
>> -enum max597x_chip_type {
>> -	MAX597x_TYPE_MAX5978 = 1,
>> -	MAX597x_TYPE_MAX5970,
>> +enum max5970_chip_type {
>> +	TYPE_MAX5978 = 1,
>> +	TYPE_MAX5970,
>>   };
>>   
>>   #define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
>> @@ -93,4 +93,4 @@ enum max597x_chip_type {
>>   #define MAX_REGISTERS			0x49
>>   #define ADC_MASK			0x3FF
>>   
>> -#endif				/* _MFD_MAX597X_H */
>> +#endif				/* _MFD_MAX5970_H */
>>
>> base-commit: b4c288cfd2f84c44994330c408e14645d45dee5b
>> -- 
>> 2.39.1
>>
> 

Regards,
Naresh

Re: [PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[Lee Jones]

On Thu, 18 May 2023, Naresh Solanki wrote:

> Hi Lee,
> 
> On 18-05-2023 03:44 pm, Lee Jones wrote:
> > On Thu, 27 Apr 2023, Naresh Solanki wrote:
> > 
> > > The previous version of this driver included wildcards in file names
> > > and descriptions. This patch renames the driver to only support MAX5970
> > > and MAX5978, which are the only chips that the driver actually supports.
> > 
> > So multiple devices are supported:
> > 
> >    MAX5970  ... AND
> >    MAX5978  ... thus
> >    MAX597X  ... does make sense, no?
> >   What are you trying to achieve?
> Understood. It is important to note that there are indeed other unrelated
> chips in addition to MAX5970 and MAX5978. Examples include MAX5971, which is
> a Single-Port, 40W, IEEE 802.3af/at PSE Controller with Integrated MOSFET,
> and MAX5974A, an Active-Clamped, Spread-Spectrum, Current-Mode PWM
> Controller, among others.
> 
> With this change, the intention is to be specific about the chips the driver
> supports. Instead of using wildcards or a broad "MAX597X" designation, the
> patch aims to exclusively support the MAX5970 and MAX5978 chips.

It's a tricky situation when engineers/marketing people name devices in
a nonsensical manner.  However, "max5970" just as misleading in this
context as "max597x", thus the patch doesn't improve anything.  It's
more of a maneuver side-ways.

> > > Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> > > ---
> > >   drivers/mfd/Kconfig                        |  4 ++--
> > >   drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
> > >   include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
> > >   3 files changed, 19 insertions(+), 19 deletions(-)
> > >   rename include/linux/mfd/{max597x.h => max5970.h} (92%)

-- 
Lee Jones [李琼斯]

Re: [PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[Naresh Solanki]

Hi Lee,

On 22-05-2023 12:41 pm, Lee Jones wrote:
> On Thu, 18 May 2023, Naresh Solanki wrote:
> 
>> Hi Lee,
>>
>> On 18-05-2023 03:44 pm, Lee Jones wrote:
>>> On Thu, 27 Apr 2023, Naresh Solanki wrote:
>>>
>>>> The previous version of this driver included wildcards in file names
>>>> and descriptions. This patch renames the driver to only support MAX5970
>>>> and MAX5978, which are the only chips that the driver actually supports.
>>>
>>> So multiple devices are supported:
>>>
>>>     MAX5970  ... AND
>>>     MAX5978  ... thus
>>>     MAX597X  ... does make sense, no?
>>>    What are you trying to achieve?
>> Understood. It is important to note that there are indeed other unrelated
>> chips in addition to MAX5970 and MAX5978. Examples include MAX5971, which is
>> a Single-Port, 40W, IEEE 802.3af/at PSE Controller with Integrated MOSFET,
>> and MAX5974A, an Active-Clamped, Spread-Spectrum, Current-Mode PWM
>> Controller, among others.
>>
>> With this change, the intention is to be specific about the chips the driver
>> supports. Instead of using wildcards or a broad "MAX597X" designation, the
>> patch aims to exclusively support the MAX5970 and MAX5978 chips.
> 
> It's a tricky situation when engineers/marketing people name devices in
> a nonsensical manner.  However, "max5970" just as misleading in this
> context as "max597x", thus the patch doesn't improve anything.  It's
> more of a maneuver side-ways.

After considering the feedback received regarding the context of the 
leaf driver for max5970, it has been recommended to specifically use 
"max5970" instead of a general designation like "max597x." However, for 
support related to max5978, the documentation can be referred to.

Therefore, this change is necessary in order to unblock the leaf driver 
and address the feedback received.

Regards,
Naresh
> 
>>>> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
>>>> ---
>>>>    drivers/mfd/Kconfig                        |  4 ++--
>>>>    drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
>>>>    include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
>>>>    3 files changed, 19 insertions(+), 19 deletions(-)
>>>>    rename include/linux/mfd/{max597x.h => max5970.h} (92%)
> 

[GIT PULL] Immutable branch between MFD and Regulator due for the v6.5 merge window

[Lee Jones]

Mark,

The following changes since commit ac9a78681b921877518763ba0e89202254349d1b:

  Linux 6.4-rc1 (2023-05-07 13:34:35 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-regulator-max5970-v6.5

for you to fetch changes up to 49f661ba99324a3f7eef0befbdaa4f22dee02b97:

  mfd: max5970: Rename driver and remove wildcard (2023-06-02 09:09:45 +0100)

----------------------------------------------------------------
Immutable branch between MFD and Regulator due for the v6.5 merge window

----------------------------------------------------------------
Naresh Solanki (1):
      mfd: max5970: Rename driver and remove wildcard

 drivers/mfd/Kconfig                        |  4 ++--
 drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
 include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
 3 files changed, 19 insertions(+), 19 deletions(-)
 rename include/linux/mfd/{max597x.h => max5970.h} (92%)

-- 
Lee Jones [李琼斯]

[PATCH 1/2] mfd: max5970: Rename driver and remove wildcard

[Naresh Solanki]

The previous version of this driver included wildcards in file names
and descriptions. This patch renames the driver to only support MAX5970
and MAX5978, which are the only chips that the driver actually supports.

Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
 drivers/mfd/Kconfig                        |  4 ++--
 drivers/mfd/simple-mfd-i2c.c               | 18 +++++++++---------
 include/linux/mfd/{max597x.h => max5970.h} | 16 ++++++++--------
 3 files changed, 19 insertions(+), 19 deletions(-)
 rename include/linux/mfd/{max597x.h => max5970.h} (92%)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e90463c4441c..71231388e03c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -266,8 +266,8 @@ config MFD_MADERA_SPI
 	  Support for the Cirrus Logic Madera platform audio SoC
 	  core functionality controlled via SPI.
 
-config MFD_MAX597X
-	tristate "Maxim 597x power switch and monitor"
+config MFD_MAX5970
+	tristate "Maxim 5970/5978 power switch and monitor"
 	depends on (I2C && OF)
 	select MFD_SIMPLE_MFD_I2C
 	help
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 20782b4dd172..1f1c007560d8 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -72,22 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
 	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
 };
 
-static const struct mfd_cell max597x_cells[] = {
-	{ .name = "max597x-regulator", },
-	{ .name = "max597x-iio", },
-	{ .name = "max597x-led", },
+static const struct mfd_cell max5970_cells[] = {
+	{ .name = "max5970-regulator", },
+	{ .name = "max5970-iio", },
+	{ .name = "max5970-led", },
 };
 
-static const struct simple_mfd_data maxim_max597x = {
-	.mfd_cell = max597x_cells,
-	.mfd_cell_size = ARRAY_SIZE(max597x_cells),
+static const struct simple_mfd_data maxim_max5970 = {
+	.mfd_cell = max5970_cells,
+	.mfd_cell_size = ARRAY_SIZE(max5970_cells),
 };
 
 static const struct of_device_id simple_mfd_i2c_of_match[] = {
 	{ .compatible = "kontron,sl28cpld" },
 	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
-	{ .compatible = "maxim,max5970", .data = &maxim_max597x},
-	{ .compatible = "maxim,max5978", .data = &maxim_max597x},
+	{ .compatible = "maxim,max5970", .data = &maxim_max5970},
+	{ .compatible = "maxim,max5978", .data = &maxim_max5970},
 	{}
 };
 MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max5970.h
similarity index 92%
rename from include/linux/mfd/max597x.h
rename to include/linux/mfd/max5970.h
index a850b2e02e6a..762a7d40c843 100644
--- a/include/linux/mfd/max597x.h
+++ b/include/linux/mfd/max5970.h
@@ -7,25 +7,25 @@
  * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
  */
 
-#ifndef _MFD_MAX597X_H
-#define _MFD_MAX597X_H
+#ifndef _MFD_MAX5970_H
+#define _MFD_MAX5970_H
 
 #include <linux/regmap.h>
 
 #define MAX5970_NUM_SWITCHES 2
 #define MAX5978_NUM_SWITCHES 1
-#define MAX597X_NUM_LEDS     4
+#define MAX5970_NUM_LEDS     4
 
-struct max597x_data {
+struct max5970_data {
 	int num_switches;
 	u32 irng[MAX5970_NUM_SWITCHES];
 	u32 mon_rng[MAX5970_NUM_SWITCHES];
 	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
 };
 
-enum max597x_chip_type {
-	MAX597x_TYPE_MAX5978 = 1,
-	MAX597x_TYPE_MAX5970,
+enum max5970_chip_type {
+	TYPE_MAX5978 = 1,
+	TYPE_MAX5970,
 };
 
 #define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
@@ -93,4 +93,4 @@ enum max597x_chip_type {
 #define MAX_REGISTERS			0x49
 #define ADC_MASK			0x3FF
 
-#endif				/* _MFD_MAX597X_H */
+#endif				/* _MFD_MAX5970_H */

base-commit: b4c288cfd2f84c44994330c408e14645d45dee5b
-- 
2.39.1

[PATCH 2/2] regulator: max5970: Rename driver and remove wildcard

[Naresh Solanki]

The previous version of this driver included wildcards in file names and
descriptions. This patch renames the driver to only support MAX5970 and
MAX5978, which are the only chips that the driver actually supports.

Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
 drivers/regulator/Kconfig                     |   6 +-
 drivers/regulator/Makefile                    |   2 +-
 ...ax597x-regulator.c => max5970-regulator.c} | 126 +++++++++---------
 3 files changed, 67 insertions(+), 67 deletions(-)
 rename drivers/regulator/{max597x-regulator.c => max5970-regulator.c} (76%)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index aae28d0a489c..36465aeb4e21 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -546,11 +546,11 @@ config REGULATOR_MAX1586
 	  regulator via I2C bus. The provided regulator is suitable
 	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 
-config REGULATOR_MAX597X
-	tristate "Maxim 597x power switch and monitor"
+config REGULATOR_MAX5970
+	tristate "Maxim 5970/5978 power switch and monitor"
 	depends on I2C
 	depends on OF
-	depends on MFD_MAX597X
+	depends on MFD_MAX5970
 	help
 	  This driver controls a Maxim 5970/5978 switch via I2C bus.
 	  The MAX5970/5978 is a smart switch with no output regulation, but
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ee383d8fc835..aed1b7c2eb78 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -67,7 +67,7 @@ obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
 obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
-obj-$(CONFIG_REGULATOR_MAX597X) += max597x-regulator.o
+obj-$(CONFIG_REGULATOR_MAX5970) += max5970-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
diff --git a/drivers/regulator/max597x-regulator.c b/drivers/regulator/max5970-regulator.c
similarity index 76%
rename from drivers/regulator/max597x-regulator.c
rename to drivers/regulator/max5970-regulator.c
index 648e3641885a..08c8eb7b1ed6 100644
--- a/drivers/regulator/max597x-regulator.c
+++ b/drivers/regulator/max5970-regulator.c
@@ -20,19 +20,19 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/platform_device.h>
 
-#include <linux/mfd/max597x.h>
+#include <linux/mfd/max5970.h>
 
-struct max597x_regulator {
+struct max5970_regulator {
 	int num_switches, mon_rng, irng, shunt_micro_ohms, lim_uA;
 	struct regmap *regmap;
 };
 
-enum max597x_regulator_id {
-	MAX597X_SW0,
-	MAX597X_SW1,
+enum max5970_regulator_id {
+	MAX5970_SW0,
+	MAX5970_SW1,
 };
 
-static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
+static int max5970_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
 {
 	int ret, reg;
 
@@ -54,11 +54,11 @@ static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
 	return 0;
 }
 
-static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
 			  bool enable, bool overvoltage)
 {
 	int off_h, off_l, reg, ret;
-	struct max597x_regulator *data = rdev_get_drvdata(rdev);
+	struct max5970_regulator *data = rdev_get_drvdata(rdev);
 	int channel = rdev_get_id(rdev);
 
 	if (overvoltage) {
@@ -96,7 +96,7 @@ static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
 	return 0;
 }
 
-static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
 			   bool enable)
 {
 	int ret;
@@ -108,14 +108,14 @@ static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
 	if ((lim_uV && !enable) || (!lim_uV && enable))
 		return -EINVAL;
 
-	ret = max597x_uvp_ovp_check_mode(rdev, severity);
+	ret = max5970_uvp_ovp_check_mode(rdev, severity);
 	if (ret)
 		return ret;
 
-	return max597x_set_vp(rdev, lim_uV, severity, enable, false);
+	return max5970_set_vp(rdev, lim_uV, severity, enable, false);
 }
 
-static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
+static int max5970_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
 			   bool enable)
 {
 	int ret;
@@ -127,20 +127,20 @@ static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
 	if ((lim_uV && !enable) || (!lim_uV && enable))
 		return -EINVAL;
 
-	ret = max597x_uvp_ovp_check_mode(rdev, severity);
+	ret = max5970_uvp_ovp_check_mode(rdev, severity);
 	if (ret)
 		return ret;
 
-	return max597x_set_vp(rdev, lim_uV, severity, enable, true);
+	return max5970_set_vp(rdev, lim_uV, severity, enable, true);
 }
 
-static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
+static int max5970_set_ocp(struct regulator_dev *rdev, int lim_uA,
 			   int severity, bool enable)
 {
 	int val, reg;
 	unsigned int vthst, vthfst;
 
-	struct max597x_regulator *data = rdev_get_drvdata(rdev);
+	struct max5970_regulator *data = rdev_get_drvdata(rdev);
 	int rdev_id = rdev_get_id(rdev);
 	/*
 	 * MAX5970 doesn't has enable control for ocp.
@@ -187,7 +187,7 @@ static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
 	return regmap_write(rdev->regmap, reg, val);
 }
 
-static int max597x_get_status(struct regulator_dev *rdev)
+static int max5970_get_status(struct regulator_dev *rdev)
 {
 	int val, ret;
 
@@ -208,21 +208,21 @@ static int max597x_get_status(struct regulator_dev *rdev)
 	return REGULATOR_STATUS_OFF;
 }
 
-static const struct regulator_ops max597x_switch_ops = {
+static const struct regulator_ops max5970_switch_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
-	.get_status = max597x_get_status,
-	.set_over_voltage_protection = max597x_set_ovp,
-	.set_under_voltage_protection = max597x_set_uvp,
-	.set_over_current_protection = max597x_set_ocp,
+	.get_status = max5970_get_status,
+	.set_over_voltage_protection = max5970_set_ovp,
+	.set_under_voltage_protection = max5970_set_uvp,
+	.set_over_current_protection = max5970_set_ocp,
 };
 
-static int max597x_dt_parse(struct device_node *np,
+static int max5970_dt_parse(struct device_node *np,
 			    const struct regulator_desc *desc,
 			    struct regulator_config *cfg)
 {
-	struct max597x_regulator *data = cfg->driver_data;
+	struct max5970_regulator *data = cfg->driver_data;
 	int ret = 0;
 
 	ret =
@@ -236,26 +236,26 @@ static int max597x_dt_parse(struct device_node *np,
 
 }
 
-#define MAX597X_SWITCH(_ID, _ereg, _chan, _supply) {     \
+#define MAX5970_SWITCH(_ID, _ereg, _chan, _supply) {     \
 	.name            = #_ID,                         \
 	.of_match        = of_match_ptr(#_ID),           \
-	.ops             = &max597x_switch_ops,          \
+	.ops             = &max5970_switch_ops,          \
 	.regulators_node = of_match_ptr("regulators"),   \
 	.type            = REGULATOR_VOLTAGE,            \
-	.id              = MAX597X_##_ID,                \
+	.id              = MAX5970_##_ID,                \
 	.owner           = THIS_MODULE,                  \
 	.supply_name     = _supply,                      \
 	.enable_reg      = _ereg,                        \
 	.enable_mask     = CHXEN((_chan)),               \
-	.of_parse_cb	 = max597x_dt_parse,		 \
+	.of_parse_cb	 = max5970_dt_parse,		 \
 }
 
 static const struct regulator_desc regulators[] = {
-	MAX597X_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
-	MAX597X_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
+	MAX5970_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
+	MAX5970_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
 };
 
-static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
+static int max5970_regmap_read_clear(struct regmap *map, unsigned int reg,
 				     unsigned int *val)
 {
 	int ret;
@@ -270,14 +270,14 @@ static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
 	return 0;
 }
 
-static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
+static int max5970_irq_handler(int irq, struct regulator_irq_data *rid,
 			       unsigned long *dev_mask)
 {
 	struct regulator_err_state *stat;
-	struct max597x_regulator *d = (struct max597x_regulator *)rid->data;
+	struct max5970_regulator *d = (struct max5970_regulator *)rid->data;
 	int val, ret, i;
 
-	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
+	ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;
 
@@ -302,7 +302,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
 		}
 	}
 
-	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
+	ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;
 
@@ -320,7 +320,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
 		}
 	}
 
-	ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
+	ret = max5970_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
 	if (ret)
 		return REGULATOR_FAILED_RETRY;
 
@@ -357,7 +357,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
 	return 0;
 }
 
-static int max597x_adc_range(struct regmap *regmap, const int ch,
+static int max5970_adc_range(struct regmap *regmap, const int ch,
 			     u32 *irng, u32 *mon_rng)
 {
 	unsigned int reg;
@@ -391,14 +391,14 @@ static int max597x_adc_range(struct regmap *regmap, const int ch,
 	return 0;
 }
 
-static int max597x_setup_irq(struct device *dev,
+static int max5970_setup_irq(struct device *dev,
 			     int irq,
 			     struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES],
-			     int num_switches, struct max597x_regulator *data)
+			     int num_switches, struct max5970_regulator *data)
 {
-	struct regulator_irq_desc max597x_notif = {
-		.name = "max597x-irq",
-		.map_event = max597x_irq_handler,
+	struct regulator_irq_desc max5970_notif = {
+		.name = "max5970-irq",
+		.map_event = max5970_irq_handler,
 		.data = data,
 	};
 	int errs = REGULATOR_ERROR_UNDER_VOLTAGE |
@@ -410,7 +410,7 @@ static int max597x_setup_irq(struct device *dev,
 	void *irq_helper;
 
 	/* Register notifiers - can fail if IRQ is not given */
-	irq_helper = devm_regulator_irq_helper(dev, &max597x_notif,
+	irq_helper = devm_regulator_irq_helper(dev, &max5970_notif,
 					       irq, 0, errs, NULL,
 					       &rdevs[0], num_switches);
 	if (IS_ERR(irq_helper)) {
@@ -423,11 +423,11 @@ static int max597x_setup_irq(struct device *dev,
 	return 0;
 }
 
-static int max597x_regulator_probe(struct platform_device *pdev)
+static int max5970_regulator_probe(struct platform_device *pdev)
 {
-	struct max597x_data *max597x;
+	struct max5970_data *max5970;
 	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	struct max597x_regulator *data;
+	struct max5970_regulator *data;
 	struct i2c_client *i2c = to_i2c_client(pdev->dev.parent);
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
@@ -438,25 +438,25 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 	if (!regmap)
 		return -EPROBE_DEFER;
 
-	max597x = devm_kzalloc(&i2c->dev, sizeof(struct max597x_data), GFP_KERNEL);
-	if (!max597x)
+	max5970 = devm_kzalloc(&i2c->dev, sizeof(struct max5970_data), GFP_KERNEL);
+	if (!max5970)
 		return -ENOMEM;
 
-	i2c_set_clientdata(i2c, max597x);
+	i2c_set_clientdata(i2c, max5970);
 
 	if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5978"))
-		max597x->num_switches = MAX597x_TYPE_MAX5978;
+		max5970->num_switches = MAX5978_NUM_SWITCHES;
 	else if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5970"))
-		max597x->num_switches = MAX597x_TYPE_MAX5970;
+		max5970->num_switches = MAX5970_NUM_SWITCHES;
 	else
 		return -ENODEV;
 
-	i2c_set_clientdata(i2c, max597x);
-	num_switches = max597x->num_switches;
+	i2c_set_clientdata(i2c, max5970);
+	num_switches = max5970->num_switches;
 
 	for (i = 0; i < num_switches; i++) {
 		data =
-		    devm_kzalloc(&i2c->dev, sizeof(struct max597x_regulator),
+		    devm_kzalloc(&i2c->dev, sizeof(struct max5970_regulator),
 				 GFP_KERNEL);
 		if (!data)
 			return -ENOMEM;
@@ -464,12 +464,12 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 		data->num_switches = num_switches;
 		data->regmap = regmap;
 
-		ret = max597x_adc_range(regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
+		ret = max5970_adc_range(regmap, i, &max5970->irng[i], &max5970->mon_rng[i]);
 		if (ret < 0)
 			return ret;
 
-		data->irng = max597x->irng[i];
-		data->mon_rng = max597x->mon_rng[i];
+		data->irng = max5970->irng[i];
+		data->mon_rng = max5970->mon_rng[i];
 
 		config.dev = &i2c->dev;
 		config.driver_data = (void *)data;
@@ -482,12 +482,12 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 			return PTR_ERR(rdev);
 		}
 		rdevs[i] = rdev;
-		max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
+		max5970->shunt_micro_ohms[i] = data->shunt_micro_ohms;
 	}
 
 	if (i2c->irq) {
 		ret =
-		    max597x_setup_irq(&i2c->dev, i2c->irq, rdevs, num_switches,
+		    max5970_setup_irq(&i2c->dev, i2c->irq, rdevs, num_switches,
 				      data);
 		if (ret) {
 			dev_err(&i2c->dev, "IRQ setup failed");
@@ -498,14 +498,14 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static struct platform_driver max597x_regulator_driver = {
+static struct platform_driver max5970_regulator_driver = {
 	.driver = {
-		.name = "max597x-regulator",
+		.name = "max5970-regulator",
 	},
-	.probe = max597x_regulator_probe,
+	.probe = max5970_regulator_probe,
 };
 
-module_platform_driver(max597x_regulator_driver);
+module_platform_driver(max5970_regulator_driver);
 
 
 MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
-- 
2.39.1

Re: [PATCH 2/2] regulator: max5970: Rename driver and remove wildcard

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 836 bytes --]

On Thu, Apr 27, 2023 at 12:22:54PM +0200, Naresh Solanki wrote:
> The previous version of this driver included wildcards in file names and
> descriptions. This patch renames the driver to only support MAX5970 and
> MAX5978, which are the only chips that the driver actually supports.

You've not copied me on the rest of the series so I don't know what's
going on with dependencies.  When sending a patch series it is important
to ensure that all the various maintainers understand what the
relationship between the patches as the expecation is that there will be
interdependencies.  Either copy everyone on the whole series or at least
copy them on the cover letter and explain what's going on.  If there are
no strong interdependencies then it's generally simplest to just send
the patches separately to avoid any possible confusion.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/2] regulator: max5970: Rename driver and remove wildcard

[Naresh Solanki]

Hi Mark,

On 27-04-2023 04:44 pm, Mark Brown wrote:
> On Thu, Apr 27, 2023 at 12:22:54PM +0200, Naresh Solanki wrote:
>> The previous version of this driver included wildcards in file names and
>> descriptions. This patch renames the driver to only support MAX5970 and
>> MAX5978, which are the only chips that the driver actually supports.
> 
> You've not copied me on the rest of the series so I don't know what's
> going on with dependencies.  When sending a patch series it is important
> to ensure that all the various maintainers understand what the
> relationship between the patches as the expecation is that there will be
> interdependencies.  Either copy everyone on the whole series or at least
> copy them on the cover letter and explain what's going on.  If there are
> no strong interdependencies then it's generally simplest to just send
> the patches separately to avoid any possible confusion.
Thanks for letting me know.
Will resend with maintainers included in every patch.

Regards,
Naresh