* Re: [PATCH net] virtio_net: use control_buf for coalesce params
2023-06-05 19:59 [PATCH net] virtio_net: use control_buf for coalesce params Brett Creeley
@ 2023-06-06 1:44 ` Jason Wang
2023-06-06 1:50 ` Xuan Zhuo
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Jason Wang @ 2023-06-06 1:44 UTC (permalink / raw)
To: Brett Creeley
Cc: linux-kernel, netdev, virtualization, alvaro.karsz, pabeni, kuba,
edumazet, davem, xuanzhuo, mst, shannon.nelson, allen.hubbe
On Tue, Jun 6, 2023 at 3:59 AM Brett Creeley <brett.creeley@amd.com> wrote:
>
> Commit 699b045a8e43 ("net: virtio_net: notifications coalescing
> support") added coalescing command support for virtio_net. However,
> the coalesce commands are using buffers on the stack, which is causing
> the device to see DMA errors. There should also be a complaint from
> check_for_stack() in debug_dma_map_xyz(). Fix this by adding and using
> coalesce params from the control_buf struct, which aligns with other
> commands.
>
> Fixes: 699b045a8e43 ("net: virtio_net: notifications coalescing support")
> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
> Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
> Signed-off-by: Brett Creeley <brett.creeley@amd.com>
> ---
> drivers/net/virtio_net.c | 16 ++++++++--------
The patch is needed for -stable I think.
Acked-by: Jason Wang <jasowang@redhat.com>
Thanks
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 56ca1d270304..486b5849033d 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -205,6 +205,8 @@ struct control_buf {
> __virtio16 vid;
> __virtio64 offloads;
> struct virtio_net_ctrl_rss rss;
> + struct virtio_net_ctrl_coal_tx coal_tx;
> + struct virtio_net_ctrl_coal_rx coal_rx;
> };
>
> struct virtnet_info {
> @@ -2934,12 +2936,10 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
> struct ethtool_coalesce *ec)
> {
> struct scatterlist sgs_tx, sgs_rx;
> - struct virtio_net_ctrl_coal_tx coal_tx;
> - struct virtio_net_ctrl_coal_rx coal_rx;
>
> - coal_tx.tx_usecs = cpu_to_le32(ec->tx_coalesce_usecs);
> - coal_tx.tx_max_packets = cpu_to_le32(ec->tx_max_coalesced_frames);
> - sg_init_one(&sgs_tx, &coal_tx, sizeof(coal_tx));
> + vi->ctrl->coal_tx.tx_usecs = cpu_to_le32(ec->tx_coalesce_usecs);
> + vi->ctrl->coal_tx.tx_max_packets = cpu_to_le32(ec->tx_max_coalesced_frames);
> + sg_init_one(&sgs_tx, &vi->ctrl->coal_tx, sizeof(vi->ctrl->coal_tx));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL,
> VIRTIO_NET_CTRL_NOTF_COAL_TX_SET,
> @@ -2950,9 +2950,9 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
> vi->tx_usecs = ec->tx_coalesce_usecs;
> vi->tx_max_packets = ec->tx_max_coalesced_frames;
>
> - coal_rx.rx_usecs = cpu_to_le32(ec->rx_coalesce_usecs);
> - coal_rx.rx_max_packets = cpu_to_le32(ec->rx_max_coalesced_frames);
> - sg_init_one(&sgs_rx, &coal_rx, sizeof(coal_rx));
> + vi->ctrl->coal_rx.rx_usecs = cpu_to_le32(ec->rx_coalesce_usecs);
> + vi->ctrl->coal_rx.rx_max_packets = cpu_to_le32(ec->rx_max_coalesced_frames);
> + sg_init_one(&sgs_rx, &vi->ctrl->coal_rx, sizeof(vi->ctrl->coal_rx));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL,
> VIRTIO_NET_CTRL_NOTF_COAL_RX_SET,
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH net] virtio_net: use control_buf for coalesce params
2023-06-05 19:59 [PATCH net] virtio_net: use control_buf for coalesce params Brett Creeley
2023-06-06 1:44 ` Jason Wang
@ 2023-06-06 1:50 ` Xuan Zhuo
2023-06-06 8:29 ` Michael S. Tsirkin
2023-06-07 4:20 ` patchwork-bot+netdevbpf
3 siblings, 0 replies; 5+ messages in thread
From: Xuan Zhuo @ 2023-06-06 1:50 UTC (permalink / raw)
To: Brett Creeley
Cc: brett.creeley, shannon.nelson, allen.hubbe, linux-kernel, netdev,
virtualization, alvaro.karsz, pabeni, kuba, edumazet, davem,
xuanzhuo, jasowang, mst
On Mon, 5 Jun 2023 12:59:25 -0700, Brett Creeley <brett.creeley@amd.com> wrote:
> Commit 699b045a8e43 ("net: virtio_net: notifications coalescing
> support") added coalescing command support for virtio_net. However,
> the coalesce commands are using buffers on the stack, which is causing
> the device to see DMA errors. There should also be a complaint from
> check_for_stack() in debug_dma_map_xyz(). Fix this by adding and using
> coalesce params from the control_buf struct, which aligns with other
> commands.
>
> Fixes: 699b045a8e43 ("net: virtio_net: notifications coalescing support")
> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
> Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
> Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Thanks.
> ---
> drivers/net/virtio_net.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 56ca1d270304..486b5849033d 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -205,6 +205,8 @@ struct control_buf {
> __virtio16 vid;
> __virtio64 offloads;
> struct virtio_net_ctrl_rss rss;
> + struct virtio_net_ctrl_coal_tx coal_tx;
> + struct virtio_net_ctrl_coal_rx coal_rx;
> };
>
> struct virtnet_info {
> @@ -2934,12 +2936,10 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
> struct ethtool_coalesce *ec)
> {
> struct scatterlist sgs_tx, sgs_rx;
> - struct virtio_net_ctrl_coal_tx coal_tx;
> - struct virtio_net_ctrl_coal_rx coal_rx;
>
> - coal_tx.tx_usecs = cpu_to_le32(ec->tx_coalesce_usecs);
> - coal_tx.tx_max_packets = cpu_to_le32(ec->tx_max_coalesced_frames);
> - sg_init_one(&sgs_tx, &coal_tx, sizeof(coal_tx));
> + vi->ctrl->coal_tx.tx_usecs = cpu_to_le32(ec->tx_coalesce_usecs);
> + vi->ctrl->coal_tx.tx_max_packets = cpu_to_le32(ec->tx_max_coalesced_frames);
> + sg_init_one(&sgs_tx, &vi->ctrl->coal_tx, sizeof(vi->ctrl->coal_tx));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL,
> VIRTIO_NET_CTRL_NOTF_COAL_TX_SET,
> @@ -2950,9 +2950,9 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
> vi->tx_usecs = ec->tx_coalesce_usecs;
> vi->tx_max_packets = ec->tx_max_coalesced_frames;
>
> - coal_rx.rx_usecs = cpu_to_le32(ec->rx_coalesce_usecs);
> - coal_rx.rx_max_packets = cpu_to_le32(ec->rx_max_coalesced_frames);
> - sg_init_one(&sgs_rx, &coal_rx, sizeof(coal_rx));
> + vi->ctrl->coal_rx.rx_usecs = cpu_to_le32(ec->rx_coalesce_usecs);
> + vi->ctrl->coal_rx.rx_max_packets = cpu_to_le32(ec->rx_max_coalesced_frames);
> + sg_init_one(&sgs_rx, &vi->ctrl->coal_rx, sizeof(vi->ctrl->coal_rx));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL,
> VIRTIO_NET_CTRL_NOTF_COAL_RX_SET,
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH net] virtio_net: use control_buf for coalesce params
2023-06-05 19:59 [PATCH net] virtio_net: use control_buf for coalesce params Brett Creeley
2023-06-06 1:44 ` Jason Wang
2023-06-06 1:50 ` Xuan Zhuo
@ 2023-06-06 8:29 ` Michael S. Tsirkin
2023-06-07 4:20 ` patchwork-bot+netdevbpf
3 siblings, 0 replies; 5+ messages in thread
From: Michael S. Tsirkin @ 2023-06-06 8:29 UTC (permalink / raw)
To: Brett Creeley
Cc: linux-kernel, netdev, virtualization, alvaro.karsz, pabeni, kuba,
edumazet, davem, xuanzhuo, jasowang, shannon.nelson, allen.hubbe
On Mon, Jun 05, 2023 at 12:59:25PM -0700, Brett Creeley wrote:
> Commit 699b045a8e43 ("net: virtio_net: notifications coalescing
> support") added coalescing command support for virtio_net. However,
> the coalesce commands are using buffers on the stack, which is causing
> the device to see DMA errors. There should also be a complaint from
> check_for_stack() in debug_dma_map_xyz(). Fix this by adding and using
> coalesce params from the control_buf struct, which aligns with other
> commands.
>
> Fixes: 699b045a8e43 ("net: virtio_net: notifications coalescing support")
> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
> Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
> Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
stable material too.
> ---
> drivers/net/virtio_net.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 56ca1d270304..486b5849033d 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -205,6 +205,8 @@ struct control_buf {
> __virtio16 vid;
> __virtio64 offloads;
> struct virtio_net_ctrl_rss rss;
> + struct virtio_net_ctrl_coal_tx coal_tx;
> + struct virtio_net_ctrl_coal_rx coal_rx;
> };
>
> struct virtnet_info {
> @@ -2934,12 +2936,10 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
> struct ethtool_coalesce *ec)
> {
> struct scatterlist sgs_tx, sgs_rx;
> - struct virtio_net_ctrl_coal_tx coal_tx;
> - struct virtio_net_ctrl_coal_rx coal_rx;
>
> - coal_tx.tx_usecs = cpu_to_le32(ec->tx_coalesce_usecs);
> - coal_tx.tx_max_packets = cpu_to_le32(ec->tx_max_coalesced_frames);
> - sg_init_one(&sgs_tx, &coal_tx, sizeof(coal_tx));
> + vi->ctrl->coal_tx.tx_usecs = cpu_to_le32(ec->tx_coalesce_usecs);
> + vi->ctrl->coal_tx.tx_max_packets = cpu_to_le32(ec->tx_max_coalesced_frames);
> + sg_init_one(&sgs_tx, &vi->ctrl->coal_tx, sizeof(vi->ctrl->coal_tx));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL,
> VIRTIO_NET_CTRL_NOTF_COAL_TX_SET,
> @@ -2950,9 +2950,9 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,
> vi->tx_usecs = ec->tx_coalesce_usecs;
> vi->tx_max_packets = ec->tx_max_coalesced_frames;
>
> - coal_rx.rx_usecs = cpu_to_le32(ec->rx_coalesce_usecs);
> - coal_rx.rx_max_packets = cpu_to_le32(ec->rx_max_coalesced_frames);
> - sg_init_one(&sgs_rx, &coal_rx, sizeof(coal_rx));
> + vi->ctrl->coal_rx.rx_usecs = cpu_to_le32(ec->rx_coalesce_usecs);
> + vi->ctrl->coal_rx.rx_max_packets = cpu_to_le32(ec->rx_max_coalesced_frames);
> + sg_init_one(&sgs_rx, &vi->ctrl->coal_rx, sizeof(vi->ctrl->coal_rx));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL,
> VIRTIO_NET_CTRL_NOTF_COAL_RX_SET,
> --
> 2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH net] virtio_net: use control_buf for coalesce params
2023-06-05 19:59 [PATCH net] virtio_net: use control_buf for coalesce params Brett Creeley
` (2 preceding siblings ...)
2023-06-06 8:29 ` Michael S. Tsirkin
@ 2023-06-07 4:20 ` patchwork-bot+netdevbpf
3 siblings, 0 replies; 5+ messages in thread
From: patchwork-bot+netdevbpf @ 2023-06-07 4:20 UTC (permalink / raw)
To: Brett Creeley
Cc: linux-kernel, netdev, virtualization, alvaro.karsz, pabeni, kuba,
edumazet, davem, xuanzhuo, jasowang, mst, shannon.nelson,
allen.hubbe
Hello:
This patch was applied to netdev/net.git (main)
by Jakub Kicinski <kuba@kernel.org>:
On Mon, 5 Jun 2023 12:59:25 -0700 you wrote:
> Commit 699b045a8e43 ("net: virtio_net: notifications coalescing
> support") added coalescing command support for virtio_net. However,
> the coalesce commands are using buffers on the stack, which is causing
> the device to see DMA errors. There should also be a complaint from
> check_for_stack() in debug_dma_map_xyz(). Fix this by adding and using
> coalesce params from the control_buf struct, which aligns with other
> commands.
>
> [...]
Here is the summary with links:
- [net] virtio_net: use control_buf for coalesce params
https://git.kernel.org/netdev/net/c/accc1bf23068
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 5+ messages in thread