public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Terry Bowman <terry.bowman@amd.com>
To: <alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
	<ira.weiny@intel.com>, <bwidawsk@kernel.org>,
	<dan.j.williams@intel.com>, <dave.jiang@intel.com>,
	<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <terry.bowman@amd.com>, <rrichter@amd.com>,
	<linux-kernel@vger.kernel.org>, <bhelgaas@google.com>
Subject: [PATCH v5 01/26] cxl/acpi: Probe RCRB later during RCH downstream port creation
Date: Wed, 7 Jun 2023 17:16:26 -0500	[thread overview]
Message-ID: <20230607221651.2454764-2-terry.bowman@amd.com> (raw)
In-Reply-To: <20230607221651.2454764-1-terry.bowman@amd.com>

From: Robert Richter <rrichter@amd.com>

The RCRB is extracted already during ACPI CEDT table parsing while the
data of this is needed not earlier than dport creation. This
implementation comes with drawbacks: During ACPI table scan there is
already MMIO access including mapping and unmapping, but only ACPI
data should be collected here. The collected data must be transferred
through a couple of interfaces until it is finally consumed when
creating the dport. This causes complex data structures and function
interfaces. Additionally, RCRB parsing will be extended to also
extract AER data, it would be much easier do this at a later point
during port and dport creation when the data structures are available
to hold that data.

To simplify all that, probe the RCRB at a later point during RCH
downstream port creation. Change ACPI table parser to only extract the
base address of either the component registers or the RCRB. Parse and
extract the RCRB in devm_cxl_add_rch_dport().

This is in preparation to centralize all RCRB scanning.

Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/cxl/acpi.c      | 52 ++++++++++++++++-------------------------
 drivers/cxl/core/port.c | 21 +++++++++++++----
 drivers/cxl/cxl.h       |  1 -
 3 files changed, 36 insertions(+), 38 deletions(-)

diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index 7e1765b09e04..39227070da9b 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -373,20 +373,18 @@ static int add_host_bridge_uport(struct device *match, void *arg)
 }
 
 struct cxl_chbs_context {
-	struct device *dev;
 	unsigned long long uid;
-	resource_size_t rcrb;
-	resource_size_t chbcr;
+	resource_size_t base;
 	u32 cxl_version;
 };
 
-static int cxl_get_chbcr(union acpi_subtable_headers *header, void *arg,
+static int cxl_get_chbs(union acpi_subtable_headers *header, void *arg,
 			 const unsigned long end)
 {
 	struct cxl_chbs_context *ctx = arg;
 	struct acpi_cedt_chbs *chbs;
 
-	if (ctx->chbcr)
+	if (ctx->base)
 		return 0;
 
 	chbs = (struct acpi_cedt_chbs *) header;
@@ -395,23 +393,16 @@ static int cxl_get_chbcr(union acpi_subtable_headers *header, void *arg,
 		return 0;
 
 	ctx->cxl_version = chbs->cxl_version;
-	ctx->rcrb = CXL_RESOURCE_NONE;
-	ctx->chbcr = CXL_RESOURCE_NONE;
+	ctx->base = CXL_RESOURCE_NONE;
 
 	if (!chbs->base)
 		return 0;
 
-	if (chbs->cxl_version != ACPI_CEDT_CHBS_VERSION_CXL11) {
-		ctx->chbcr = chbs->base;
+	if (chbs->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11 &&
+	    chbs->length != CXL_RCRB_SIZE)
 		return 0;
-	}
 
-	if (chbs->length != CXL_RCRB_SIZE)
-		return 0;
-
-	ctx->rcrb = chbs->base;
-	ctx->chbcr = cxl_rcrb_to_component(ctx->dev, chbs->base,
-					   CXL_RCRB_DOWNSTREAM);
+	ctx->base = chbs->base;
 
 	return 0;
 }
@@ -440,36 +431,33 @@ static int add_host_bridge_dport(struct device *match, void *arg)
 	dev_dbg(match, "UID found: %lld\n", uid);
 
 	ctx = (struct cxl_chbs_context) {
-		.dev = match,
 		.uid = uid,
 	};
-	acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, cxl_get_chbcr, &ctx);
+	acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, cxl_get_chbs, &ctx);
 
-	if (!ctx.chbcr) {
+	if (!ctx.base) {
 		dev_warn(match, "No CHBS found for Host Bridge (UID %lld)\n",
 			 uid);
 		return 0;
 	}
 
-	if (ctx.rcrb != CXL_RESOURCE_NONE)
-		dev_dbg(match, "RCRB found for UID %lld: %pa\n", uid, &ctx.rcrb);
-
-	if (ctx.chbcr == CXL_RESOURCE_NONE) {
-		dev_warn(match, "CHBCR invalid for Host Bridge (UID %lld)\n",
+	if (ctx.base == CXL_RESOURCE_NONE) {
+		dev_warn(match, "CHBS invalid for Host Bridge (UID %lld)\n",
 			 uid);
 		return 0;
 	}
 
-	dev_dbg(match, "CHBCR found: %pa\n", &ctx.chbcr);
-
 	pci_root = acpi_pci_find_root(hb->handle);
 	bridge = pci_root->bus->bridge;
-	if (ctx.cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11)
-		dport = devm_cxl_add_rch_dport(root_port, bridge, uid,
-					       ctx.chbcr, ctx.rcrb);
-	else
-		dport = devm_cxl_add_dport(root_port, bridge, uid,
-					   ctx.chbcr);
+
+	if (ctx.cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) {
+		dev_dbg(match, "RCRB found for UID %lld: %pa\n", uid, &ctx.base);
+		dport = devm_cxl_add_rch_dport(root_port, bridge, uid, ctx.base);
+	} else {
+		dev_dbg(match, "CHBCR found for UID %lld: %pa\n", uid, &ctx.base);
+		dport = devm_cxl_add_dport(root_port, bridge, uid, ctx.base);
+	}
+
 	if (IS_ERR(dport))
 		return PTR_ERR(dport);
 
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index e7c284c890bc..1a3f8729a616 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -938,12 +938,25 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
 	if (!dport)
 		return ERR_PTR(-ENOMEM);
 
+	if (rcrb != CXL_RESOURCE_NONE) {
+		component_reg_phys = cxl_rcrb_to_component(dport_dev,
+						rcrb, CXL_RCRB_DOWNSTREAM);
+		if (component_reg_phys == CXL_RESOURCE_NONE) {
+			dev_warn(dport_dev, "Invalid Component Registers in RCRB");
+			return ERR_PTR(-ENXIO);
+		}
+
+		dport->rch = true;
+	}
+
+	if (component_reg_phys != CXL_RESOURCE_NONE)
+		dev_dbg(dport_dev, "Component Registers found for dport: %pa\n",
+			&component_reg_phys);
+
 	dport->dport = dport_dev;
 	dport->port_id = port_id;
 	dport->component_reg_phys = component_reg_phys;
 	dport->port = port;
-	if (rcrb != CXL_RESOURCE_NONE)
-		dport->rch = true;
 	dport->rcrb = rcrb;
 
 	cond_cxl_root_lock(port);
@@ -1004,14 +1017,12 @@ EXPORT_SYMBOL_NS_GPL(devm_cxl_add_dport, CXL);
  * @port: the cxl_port that references this dport
  * @dport_dev: firmware or PCI device representing the dport
  * @port_id: identifier for this dport in a decoder's target list
- * @component_reg_phys: optional location of CXL component registers
  * @rcrb: mandatory location of a Root Complex Register Block
  *
  * See CXL 3.0 9.11.8 CXL Devices Attached to an RCH
  */
 struct cxl_dport *devm_cxl_add_rch_dport(struct cxl_port *port,
 					 struct device *dport_dev, int port_id,
-					 resource_size_t component_reg_phys,
 					 resource_size_t rcrb)
 {
 	struct cxl_dport *dport;
@@ -1022,7 +1033,7 @@ struct cxl_dport *devm_cxl_add_rch_dport(struct cxl_port *port,
 	}
 
 	dport = __devm_cxl_add_dport(port, dport_dev, port_id,
-				     component_reg_phys, rcrb);
+				     CXL_RESOURCE_NONE, rcrb);
 	if (IS_ERR(dport)) {
 		dev_dbg(dport_dev, "failed to add RCH dport to %s: %ld\n",
 			dev_name(&port->dev), PTR_ERR(dport));
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index f93a28538962..a5cd661face2 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -671,7 +671,6 @@ struct cxl_dport *devm_cxl_add_dport(struct cxl_port *port,
 				     resource_size_t component_reg_phys);
 struct cxl_dport *devm_cxl_add_rch_dport(struct cxl_port *port,
 					 struct device *dport_dev, int port_id,
-					 resource_size_t component_reg_phys,
 					 resource_size_t rcrb);
 
 struct cxl_decoder *to_cxl_decoder(struct device *dev);
-- 
2.34.1


  reply	other threads:[~2023-06-07 22:17 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-07 22:16 [PATCH v5 00/26] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-07 22:16 ` Terry Bowman [this message]
2023-06-08  1:03   ` [PATCH v5 01/26] cxl/acpi: Probe RCRB later during RCH downstream port creation Dan Williams
2023-06-08  1:11     ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 02/26] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-08  4:53   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 03/26] cxl: Rename member @dport of struct cxl_dport to @dev Terry Bowman
2023-06-08  6:42   ` Dan Williams
2023-06-08 14:36     ` Terry Bowman
2023-06-08 19:08       ` Dan Williams
2023-06-08 19:22         ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 04/26] cxl/core/regs: Rename phys_addr in cxl_map_component_regs() Terry Bowman
2023-06-08  6:47   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 05/26] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-08 19:29   ` Dan Williams
2023-06-08 21:50     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 06/26] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-08 19:57   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 07/26] cxl/acpi: Moving add_host_bridge_uport() around Terry Bowman
2023-06-08 20:02   ` Dan Williams
2023-06-08 21:50     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 08/26] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-09  4:24   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 09/26] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-10  0:18   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 10/26] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-10  0:26   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 11/26] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-10  1:36   ` Dan Williams
2023-06-10  1:44   ` Dan Williams
2023-06-12 20:39   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 12/26] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-10  2:18   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 13/26] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Terry Bowman
2023-06-10  2:23   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 14/26] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-10  2:29   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 15/26] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-06-10  2:34   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 16/26] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-10  2:36   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 17/26] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-10  2:37   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 18/26] cxl/pci: Remove Component Register base address from struct cxl_dev_state Terry Bowman
2023-06-10  2:38   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 19/26] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-10  3:09   ` Dan Williams
2023-06-12 14:41     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 20/26] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-10  3:11   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 21/26] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-10  3:12   ` Dan Williams
2023-06-12 21:12   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 22/26] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-10  3:23   ` Dan Williams
2023-06-12 18:19     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 23/26] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-12 20:29   ` Dan Williams
2023-06-13 15:28     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 24/26] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-12 21:38   ` Dan Williams
2023-06-16 16:17     ` Terry Bowman
2023-06-16 16:28       ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 25/26] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-08 22:54   ` kernel test robot
2023-06-12 22:49   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 26/26] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-08 19:21   ` Bjorn Helgaas
2023-06-12 22:57   ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230607221651.2454764-2-terry.bowman@amd.com \
    --to=terry.bowman@amd.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=bhelgaas@google.com \
    --cc=bwidawsk@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rrichter@amd.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox