Re: [PATCH] rtc: pcf-8563: Report previously detected low-voltage via RTC_VL_BACKUP_LOW

[Alexandre Belloni <alexandre.belloni@bootlin.com>]

Hello Jan,

On 09/06/2023 23:04:12+0200, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka@siemens.com>
> 
> The VL bit in the seconds register remains set only until seconds are
> written under main power. As this often happens during boot-up after
> picking up a network time, make sure to preserve the low battery state
> across this, caching it and returning it via the RTC_VL_BACKUP_LOW bit.
> 
> To permit userspace clearing this state during runtime, also implement
> RTC_VL_CLR that works against the cached state.
> 
> This is emulating RTCs which have a battery voltage check that works
> under main power as well.
> 

Emulating doesn't work well and I deliberately chose to not implement
it. For example, in your scenario, if you boot twice without using
VL_READ, you anyway have lost the information. This makes emulating
unreliabl. The fix you need is in userspace where you have to ensure you
read the status before setting the time.

> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>  drivers/rtc/rtc-pcf8563.c | 17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
> index 7e720472213c..f8c6cdb9a39d 100644
> --- a/drivers/rtc/rtc-pcf8563.c
> +++ b/drivers/rtc/rtc-pcf8563.c
> @@ -81,6 +81,7 @@ struct pcf8563 {
>  #ifdef CONFIG_COMMON_CLK
>  	struct clk_hw		clkout_hw;
>  #endif
> +	bool low_bat;
>  };
>  
>  static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg,
> @@ -207,6 +208,7 @@ static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
>  		return err;
>  
>  	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
> +		pcf8563->low_bat = true;
>  		dev_err(&client->dev,
>  			"low voltage detected, date/time is not reliable.\n");
>  		return -EINVAL;
> @@ -277,6 +279,8 @@ static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
>  static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
>  {
>  	struct i2c_client *client = to_i2c_client(dev);
> +	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
> +	unsigned int state = 0;
>  	int ret;
>  
>  	switch (cmd) {
> @@ -284,9 +288,16 @@ static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long
>  		ret = i2c_smbus_read_byte_data(client, PCF8563_REG_SC);
>  		if (ret < 0)
>  			return ret;
> -
> -		return put_user(ret & PCF8563_SC_LV ? RTC_VL_DATA_INVALID : 0,
> -				(unsigned int __user *)arg);
> +		if (ret & PCF8563_SC_LV) {
> +			state |= RTC_VL_DATA_INVALID;
> +			pcf8563->low_bat = true;
> +		}
> +		if (pcf8563->low_bat)
> +			state |= RTC_VL_BACKUP_LOW;
> +		return put_user(state, (unsigned int __user *)arg);
> +	case RTC_VL_CLR:
> +		pcf8563->low_bat = false;
> +		return 0;
>  	default:
>  		return -ENOIOCTLCMD;
>  	}
> -- 
> 2.35.3

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com