From: Andi Shyti <andi.shyti@kernel.org>
To: Piyush Malgujar <pmalgujar@marvell.com>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
wsa@kernel.org, rric@kernel.org, jannadurai@marvell.com,
cchavva@marvell.com, Suneel Garapati <sgarapati@marvell.com>
Subject: Re: [PATCH 3/3] i2c: octeon: Handle watchdog timeout
Date: Sat, 10 Jun 2023 15:24:39 +0200 [thread overview]
Message-ID: <20230610132439.ydiuizoolplonvjf@intel.intel> (raw)
In-Reply-To: <20230330133953.21074-4-pmalgujar@marvell.com>
Hi Suneel and Piysh,
On Thu, Mar 30, 2023 at 06:39:53AM -0700, Piyush Malgujar wrote:
> From: Suneel Garapati <sgarapati@marvell.com>
>
> Status code 0xF0 refers to expiry of TWSI controller
> access watchdog and needs bus monitor reset using MODE
> register.
>
> Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
> Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
> ---
> drivers/i2c/busses/i2c-octeon-core.c | 8 ++++++++
> drivers/i2c/busses/i2c-octeon-core.h | 1 +
> 2 files changed, 9 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c
> index 7c49dc8ccbd2ef05fec675d282193b98f2b69835..3482db7165f243232937e0af148fe996858e9f2e 100644
> --- a/drivers/i2c/busses/i2c-octeon-core.c
> +++ b/drivers/i2c/busses/i2c-octeon-core.c
> @@ -187,6 +187,7 @@ static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
> static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
> {
> u8 stat;
> + u64 mode;
>
> /*
> * This is ugly... in HLC mode the status is not in the status register
> @@ -249,6 +250,13 @@ static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
> case STAT_RXADDR_NAK:
> case STAT_AD2W_NAK:
> return -ENXIO;
> +
> + case STAT_WDOG_TOUT:
> + mode = __raw_readq(i2c->twsi_base + MODE(i2c));
> + /* Set BUS_MON_RST to reset bus monitor */
> + mode |= BIT(3);
Would be nice to have this masks all defined, but other than
this:
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Thanks,
Andi
> + octeon_i2c_writeq_flush(mode, i2c->twsi_base + MODE(i2c));
> + return -EIO;
> default:
> dev_err(i2c->dev, "unhandled state: %d\n", stat);
> return -EIO;
> diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h
> index 89d7d3bb8e30bd5787978d17d5a9b20ab0d41e22..a8d1bf9e89b8b0d21f52ff9f77f0ecf5263b5843 100644
> --- a/drivers/i2c/busses/i2c-octeon-core.h
> +++ b/drivers/i2c/busses/i2c-octeon-core.h
> @@ -72,6 +72,7 @@
> #define STAT_SLAVE_ACK 0xC8
> #define STAT_AD2W_ACK 0xD0
> #define STAT_AD2W_NAK 0xD8
> +#define STAT_WDOG_TOUT 0xF0
> #define STAT_IDLE 0xF8
>
> /* TWSI_INT values */
> --
> 2.17.1
>
prev parent reply other threads:[~2023-06-10 13:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-30 13:39 [PATCH 0/3] i2c: thunderx: Marvell thunderx i2c changes Piyush Malgujar
2023-03-30 13:39 ` [PATCH 1/3] i2c: thunderx: Clock divisor logic changes Piyush Malgujar
2023-06-10 12:29 ` Andi Shyti
2023-03-30 13:39 ` [PATCH 2/3] i2c: thunderx: Add support for High speed mode Piyush Malgujar
2023-03-30 15:46 ` kernel test robot
2023-03-30 17:39 ` kernel test robot
2023-06-10 12:42 ` Andi Shyti
2023-03-30 13:39 ` [PATCH 3/3] i2c: octeon: Handle watchdog timeout Piyush Malgujar
2023-06-10 13:24 ` Andi Shyti [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230610132439.ydiuizoolplonvjf@intel.intel \
--to=andi.shyti@kernel.org \
--cc=cchavva@marvell.com \
--cc=jannadurai@marvell.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmalgujar@marvell.com \
--cc=rric@kernel.org \
--cc=sgarapati@marvell.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox