From: Udit Kumar <u-kumar1@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<conor+dt@kernel.org>, <m-chawdhry@ti.com>, <n-francis@ti.com>
Cc: Udit Kumar <u-kumar1@ti.com>
Subject: [v4 0/6] arm64: dts: ti: k3-j7200: Add properties and sync with uboot
Date: Sun, 11 Jun 2023 16:41:34 +0530 [thread overview]
Message-ID: <20230611111140.3189111-1-u-kumar1@ti.com> (raw)
In continuation of patch series posted by Nishanth for sync of uboot device tree with kernel device tree for AM64 SOC.
https://lore.kernel.org/linux-arm-kernel/20230414073328.381336-1-nm@ti.com/
This series extend device tree sync/clean up for J7200 SOC.
This patch series build on top of
https://lore.kernel.org/all/20230419040007.3022780-1-u-kumar1@ti.com
Boot logs
https://gist.github.com/uditkumarti/a43decc11c49d59c658cfc4f3f255c5e
Changes since v3:
https://lore.kernel.org/all/20230604045525.1889083-1-u-kumar1@ti.com/
* Add general purpose timers
Added reviewed by Tony Lindgren
* Configure pinctrl for timer IO pads
No change
* remove duplicate main_i2c0 pin mux
Moved before uart pin mux
* Add uart pinmux
Added missing uart pin mux
* Define aliases at board level
* Drop SoC level aliases
Moved aliases<F4> at board level
Changes since v2:
https://lore.kernel.org/all/20230601093744.1565802-1-u-kumar1@ti.com/
* Configure pinctrl for timer IO pads
Added reviewed by Tony Lindgren
* Add uart pin mux in main_pmx0
Changed subject of patch
Changes since v1:
https://lore.kernel.org/all/20230426103219.1565266-1-u-kumar1@ti.com/
* Add general purpose timers:
Addded CLKSEL_VD clock for odd numbered timers
Marked MCU_Timer as reserved, fixed clock index for main_timer13
*Configure pinctrl for timer IO pads
Marked mcu_timerio_input as reserved
*main_pmx0 clean up
Splitted into two patches, One for UART and second for i2c duplication removal
*Add uart pin mux in wkup_pmx0
No change
*Add bootph-pre-ram for u-boot
patch dropped, later will add bootph-pre-ram property later for all nodes.
Udit Kumar (6):
arm64: dts: ti: k3-j7200: Add general purpose timers
arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads
arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0
pin mux
arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux
arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board
level
arm64: dts: ti: k3-j7200: Drop SoC level aliases
.../dts/ti/k3-j7200-common-proc-board.dts | 67 ++++-
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 258 ++++++++++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 150 ++++++++++
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 17 --
4 files changed, 471 insertions(+), 21 deletions(-)
--
2.34.1
next reply other threads:[~2023-06-11 11:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-11 11:11 Udit Kumar [this message]
2023-06-11 11:11 ` [v4 1/6] arm64: dts: ti: k3-j7200: Add general purpose timers Udit Kumar
2023-06-11 11:11 ` [v4 2/6] arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads Udit Kumar
2023-06-11 11:11 ` [v4 3/6] arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux Udit Kumar
2023-06-11 11:11 ` [v4 4/6] arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux Udit Kumar
2023-06-11 11:11 ` [v4 5/6] arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board level Udit Kumar
2023-06-11 11:11 ` [v4 6/6] arm64: dts: ti: k3-j7200: Drop SoC level aliases Udit Kumar
2023-06-13 11:56 ` [v4 0/6] arm64: dts: ti: k3-j7200: Add properties and sync with uboot Nishanth Menon
2023-06-15 13:31 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230611111140.3189111-1-u-kumar1@ti.com \
--to=u-kumar1@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m-chawdhry@ti.com \
--cc=n-francis@ti.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox