[PATCH AUTOSEL 6.1 05/26] spi: lpspi: disable lpspi module irq in DMA mode

[Sasha Levin <sashal@kernel.org>]

From: Clark Wang <xiaoning.wang@nxp.com>

[ Upstream commit 9728fb3ce11729aa8c276825ddf504edeb00611d ]

When all bits of IER are set to 0, we still can observe the lpspi irq events
when using DMA mode to transfer data.

So disable irq to avoid the too much irq events.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20230505063557.3962220-1-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-lpspi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index e8c1c8a4c6c82..9e324d72596af 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -905,9 +905,14 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	ret = fsl_lpspi_dma_init(&pdev->dev, fsl_lpspi, controller);
 	if (ret == -EPROBE_DEFER)
 		goto out_pm_get;
-
 	if (ret < 0)
 		dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret);
+	else
+		/*
+		 * disable LPSPI module IRQ when enable DMA mode successfully,
+		 * to prevent the unexpected LPSPI module IRQ events.
+		 */
+		disable_irq(irq);
 
 	ret = devm_spi_register_controller(&pdev->dev, controller);
 	if (ret < 0) {
-- 
2.39.2