From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: linux-clk@vger.kernel.org
Cc: linux-mips@vger.kernel.org, tsbogend@alpha.franken.de,
john@phrozen.org, linux-kernel@vger.kernel.org,
p.zabel@pengutronix.de, mturquette@baylibre.com,
sboyd@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, matthias.bgg@gmail.com,
devicetree@vger.kernel.org, arinc.unal@arinc9.com,
yangshiji66@outlook.com
Subject: [PATCH v5 4/9] mips: ralink: rt305x: remove clock related code
Date: Mon, 19 Jun 2023 06:09:36 +0200 [thread overview]
Message-ID: <20230619040941.1340372-5-sergio.paracuellos@gmail.com> (raw)
In-Reply-To: <20230619040941.1340372-1-sergio.paracuellos@gmail.com>
A properly clock driver for ralink SoCs has been added. Hence there is no
need to have clock related code in 'arch/mips/ralink' folder anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
arch/mips/include/asm/mach-ralink/rt305x.h | 21 ------
arch/mips/ralink/rt305x.c | 78 ----------------------
2 files changed, 99 deletions(-)
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
index ef58f7bff957..4fc5c279cd75 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -67,26 +67,9 @@ static inline int soc_is_rt5350(void)
#define CHIP_ID_ID_SHIFT 8
#define CHIP_ID_REV_MASK 0xff
-#define RT305X_SYSCFG_CPUCLK_SHIFT 18
-#define RT305X_SYSCFG_CPUCLK_MASK 0x1
-#define RT305X_SYSCFG_CPUCLK_LOW 0x0
-#define RT305X_SYSCFG_CPUCLK_HIGH 0x1
-
#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2
-#define RT305X_SYSCFG_CPUCLK_MASK 0x1
#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 0x1
-#define RT3352_SYSCFG0_CPUCLK_SHIFT 8
-#define RT3352_SYSCFG0_CPUCLK_MASK 0x1
-#define RT3352_SYSCFG0_CPUCLK_LOW 0x0
-#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1
-
-#define RT5350_SYSCFG0_CPUCLK_SHIFT 8
-#define RT5350_SYSCFG0_CPUCLK_MASK 0x3
-#define RT5350_SYSCFG0_CPUCLK_360 0x0
-#define RT5350_SYSCFG0_CPUCLK_320 0x2
-#define RT5350_SYSCFG0_CPUCLK_300 0x3
-
#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12
#define RT5350_SYSCFG0_DRAM_SIZE_MASK 7
#define RT5350_SYSCFG0_DRAM_SIZE_2M 0
@@ -117,13 +100,9 @@ static inline int soc_is_rt5350(void)
#define RT3352_SYSC_REG_SYSCFG0 0x010
#define RT3352_SYSC_REG_SYSCFG1 0x014
-#define RT3352_SYSC_REG_CLKCFG1 0x030
#define RT3352_SYSC_REG_RSTCTRL 0x034
#define RT3352_SYSC_REG_USB_PS 0x05c
-#define RT3352_CLKCFG0_XTAL_SEL BIT(20)
-#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18)
-#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20)
#define RT3352_RSTCTRL_UHST BIT(22)
#define RT3352_RSTCTRL_UDEV BIT(25)
#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index d8dcc5cc66cc..9cffe69dd11d 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -56,84 +56,6 @@ static unsigned long rt5350_get_mem_size(void)
return ret;
}
-void __init ralink_clk_init(void)
-{
- unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
- unsigned long wmac_rate = 40000000;
-
- u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
-
- if (soc_is_rt305x() || soc_is_rt3350()) {
- t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
- RT305X_SYSCFG_CPUCLK_MASK;
- switch (t) {
- case RT305X_SYSCFG_CPUCLK_LOW:
- cpu_rate = 320000000;
- break;
- case RT305X_SYSCFG_CPUCLK_HIGH:
- cpu_rate = 384000000;
- break;
- }
- sys_rate = uart_rate = wdt_rate = cpu_rate / 3;
- } else if (soc_is_rt3352()) {
- t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
- RT3352_SYSCFG0_CPUCLK_MASK;
- switch (t) {
- case RT3352_SYSCFG0_CPUCLK_LOW:
- cpu_rate = 384000000;
- break;
- case RT3352_SYSCFG0_CPUCLK_HIGH:
- cpu_rate = 400000000;
- break;
- }
- sys_rate = wdt_rate = cpu_rate / 3;
- uart_rate = 40000000;
- } else if (soc_is_rt5350()) {
- t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
- RT5350_SYSCFG0_CPUCLK_MASK;
- switch (t) {
- case RT5350_SYSCFG0_CPUCLK_360:
- cpu_rate = 360000000;
- sys_rate = cpu_rate / 3;
- break;
- case RT5350_SYSCFG0_CPUCLK_320:
- cpu_rate = 320000000;
- sys_rate = cpu_rate / 4;
- break;
- case RT5350_SYSCFG0_CPUCLK_300:
- cpu_rate = 300000000;
- sys_rate = cpu_rate / 3;
- break;
- default:
- BUG();
- }
- uart_rate = 40000000;
- wdt_rate = sys_rate;
- } else {
- BUG();
- }
-
- if (soc_is_rt3352() || soc_is_rt5350()) {
- u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
-
- if (!(val & RT3352_CLKCFG0_XTAL_SEL))
- wmac_rate = 20000000;
- }
-
- ralink_clk_add("cpu", cpu_rate);
- ralink_clk_add("sys", sys_rate);
- ralink_clk_add("10000900.i2c", uart_rate);
- ralink_clk_add("10000a00.i2s", uart_rate);
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000b40.spi", sys_rate);
- ralink_clk_add("10000100.timer", wdt_rate);
- ralink_clk_add("10000120.watchdog", wdt_rate);
- ralink_clk_add("10000500.uart", uart_rate);
- ralink_clk_add("10000c00.uartlite", uart_rate);
- ralink_clk_add("10100000.ethernet", sys_rate);
- ralink_clk_add("10180000.wmac", wmac_rate);
-}
-
void __init ralink_of_remap(void)
{
rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc");
--
2.25.1
next prev parent reply other threads:[~2023-06-19 4:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-19 4:09 [PATCH v5 0/9] mips: ralink: add complete clock and reset driver for mtmips SoCs Sergio Paracuellos
2023-06-19 4:09 ` [PATCH v5 1/9] dt-bindings: clock: add mtmips SoCs system controller Sergio Paracuellos
2023-06-19 4:09 ` [PATCH v5 2/9] clk: ralink: add clock and reset driver for MTMIPS SoCs Sergio Paracuellos
2023-06-19 4:09 ` [PATCH v5 3/9] mips: ralink: rt288x: remove clock related code Sergio Paracuellos
2023-06-19 4:09 ` Sergio Paracuellos [this message]
2023-06-19 4:09 ` [PATCH v5 5/9] mips: ralink: rt3883: " Sergio Paracuellos
2023-06-19 4:09 ` [PATCH v5 6/9] mips: ralink: mt7620: " Sergio Paracuellos
2023-06-19 4:09 ` [PATCH v5 7/9] mips: ralink: remove reset " Sergio Paracuellos
2023-06-19 4:09 ` [PATCH v5 8/9] mips: ralink: get cpu rate from new driver code Sergio Paracuellos
2023-06-19 4:09 ` [PATCH v5 9/9] MAINTAINERS: add Mediatek MTMIPS Clock maintainer Sergio Paracuellos
2023-06-21 14:07 ` [PATCH v5 0/9] mips: ralink: add complete clock and reset driver for mtmips SoCs Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230619040941.1340372-5-sergio.paracuellos@gmail.com \
--to=sergio.paracuellos@gmail.com \
--cc=arinc.unal@arinc9.com \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tsbogend@alpha.franken.de \
--cc=yangshiji66@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox