From: Terry Bowman <terry.bowman@amd.com>
To: <alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
<ira.weiny@intel.com>, <bwidawsk@kernel.org>,
<dan.j.williams@intel.com>, <dave.jiang@intel.com>,
<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <terry.bowman@amd.com>, <rrichter@amd.com>,
<linux-kernel@vger.kernel.org>, <bhelgaas@google.com>
Subject: [PATCH v7 09/27] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port
Date: Thu, 22 Jun 2023 15:55:05 -0500 [thread overview]
Message-ID: <20230622205523.85375-10-terry.bowman@amd.com> (raw)
In-Reply-To: <20230622205523.85375-1-terry.bowman@amd.com>
From: Robert Richter <rrichter@amd.com>
During a Host Bridge's downstream port enumeration the CHBS entries in
the CEDT table are parsed, its Component Register base address
extracted and then stored in struct cxl_dport. The CHBS may contain
either the RCRB (RCH mode) or the Host Bridge's Component Registers
(CHBCR, VH mode). The RCRB further contains the CXL downstream port
register base address, while in VH mode the CXL Downstream Switch
Ports are visible in the PCI hierarchy and the DP's component regs are
disovered using the CXL DVSEC register locator capability. The
Component Registers derived from the CHBS for both modes are different
and thus also must be treated differently. That is, in RCH mode, the
component regs base should be bound to the dport, but in VH mode to
the CXL host bridge's port object.
The current implementation stores the CHBCR in addition in struct
cxl_dport and copies it later from there to struct cxl_port. As a
result, the dport contains the wrong Component Registers base address
and, e.g. the RAS capability of a CXL Root Port cannot be detected.
To fix the CHBCR binding, attach it directly to the Host Bridge's
@cxl_port structure. Do this during port creation of the Host Bridge
in add_host_bridge_uport(). Factor out CHBS parsing code in
add_host_bridge_dport() and use it in both functions.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/cxl/acpi.c | 91 ++++++++++++++++++++++++++++++++--------------
1 file changed, 63 insertions(+), 28 deletions(-)
diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index 0c975ee684b0..89ee01323d43 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -335,13 +335,13 @@ struct cxl_chbs_context {
u32 cxl_version;
};
-static int cxl_get_chbs(union acpi_subtable_headers *header, void *arg,
- const unsigned long end)
+static int cxl_get_chbs_iter(union acpi_subtable_headers *header, void *arg,
+ const unsigned long end)
{
struct cxl_chbs_context *ctx = arg;
struct acpi_cedt_chbs *chbs;
- if (ctx->base)
+ if (ctx->base != CXL_RESOURCE_NONE)
return 0;
chbs = (struct acpi_cedt_chbs *) header;
@@ -350,8 +350,6 @@ static int cxl_get_chbs(union acpi_subtable_headers *header, void *arg,
return 0;
ctx->cxl_version = chbs->cxl_version;
- ctx->base = CXL_RESOURCE_NONE;
-
if (!chbs->base)
return 0;
@@ -364,11 +362,35 @@ static int cxl_get_chbs(union acpi_subtable_headers *header, void *arg,
return 0;
}
+static int cxl_get_chbs(struct device *dev, struct acpi_device *hb,
+ struct cxl_chbs_context *ctx)
+{
+ unsigned long long uid;
+ int rc;
+
+ rc = acpi_evaluate_integer(hb->handle, METHOD_NAME__UID, NULL, &uid);
+ if (rc != AE_OK) {
+ dev_err(dev, "unable to retrieve _UID\n");
+ return -ENOENT;
+ }
+
+ dev_dbg(dev, "UID found: %lld\n", uid);
+ *ctx = (struct cxl_chbs_context) {
+ .dev = dev,
+ .uid = uid,
+ .base = CXL_RESOURCE_NONE,
+ .cxl_version = UINT_MAX,
+ };
+
+ acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, cxl_get_chbs_iter, ctx);
+
+ return 0;
+}
+
static int add_host_bridge_dport(struct device *match, void *arg)
{
acpi_status rc;
struct device *bridge;
- unsigned long long uid;
struct cxl_dport *dport;
struct cxl_chbs_context ctx;
struct acpi_pci_root *pci_root;
@@ -379,41 +401,38 @@ static int add_host_bridge_dport(struct device *match, void *arg)
if (!hb)
return 0;
- rc = acpi_evaluate_integer(hb->handle, METHOD_NAME__UID, NULL, &uid);
- if (rc != AE_OK) {
- dev_err(match, "unable to retrieve _UID\n");
- return -ENODEV;
- }
-
- dev_dbg(match, "UID found: %lld\n", uid);
-
- ctx = (struct cxl_chbs_context) {
- .dev = match,
- .uid = uid,
- };
- acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, cxl_get_chbs, &ctx);
+ rc = cxl_get_chbs(match, hb, &ctx);
+ if (rc)
+ return rc;
- if (!ctx.base) {
+ if (ctx.cxl_version == UINT_MAX) {
dev_warn(match, "No CHBS found for Host Bridge (UID %lld)\n",
- uid);
+ ctx.uid);
return 0;
}
if (ctx.base == CXL_RESOURCE_NONE) {
dev_warn(match, "CHBS invalid for Host Bridge (UID %lld)\n",
- uid);
+ ctx.uid);
return 0;
}
pci_root = acpi_pci_find_root(hb->handle);
bridge = pci_root->bus->bridge;
+ /*
+ * In RCH mode, bind the component regs base to the dport. In
+ * VH mode it will be bound to the CXL host bridge's port
+ * object later in add_host_bridge_uport().
+ */
if (ctx.cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) {
- dev_dbg(match, "RCRB found for UID %lld: %pa\n", uid, &ctx.base);
- dport = devm_cxl_add_rch_dport(root_port, bridge, uid, ctx.base);
+ dev_dbg(match, "RCRB found for UID %lld: %pa\n", ctx.uid,
+ &ctx.base);
+ dport = devm_cxl_add_rch_dport(root_port, bridge, ctx.uid,
+ ctx.base);
} else {
- dev_dbg(match, "CHBCR found for UID %lld: %pa\n", uid, &ctx.base);
- dport = devm_cxl_add_dport(root_port, bridge, uid, ctx.base);
+ dport = devm_cxl_add_dport(root_port, bridge, ctx.uid,
+ CXL_RESOURCE_NONE);
}
if (IS_ERR(dport))
@@ -435,6 +454,8 @@ static int add_host_bridge_uport(struct device *match, void *arg)
struct cxl_dport *dport;
struct cxl_port *port;
struct device *bridge;
+ struct cxl_chbs_context ctx;
+ resource_size_t component_reg_phys;
int rc;
if (!hb)
@@ -453,12 +474,26 @@ static int add_host_bridge_uport(struct device *match, void *arg)
return 0;
}
+ rc = cxl_get_chbs(match, hb, &ctx);
+ if (rc)
+ return rc;
+
+ if (ctx.cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) {
+ dev_warn(bridge,
+ "CXL CHBS version mismatch, skip port registration\n");
+ return 0;
+ }
+
+ component_reg_phys = ctx.base;
+ if (component_reg_phys != CXL_RESOURCE_NONE)
+ dev_dbg(match, "CHBCR found for UID %lld: %pa\n",
+ ctx.uid, &component_reg_phys);
+
rc = devm_cxl_register_pci_bus(host, bridge, pci_root->bus);
if (rc)
return rc;
- port = devm_cxl_add_port(host, bridge, dport->component_reg_phys,
- dport);
+ port = devm_cxl_add_port(host, bridge, component_reg_phys, dport);
if (IS_ERR(port))
return PTR_ERR(port);
--
2.34.1
next prev parent reply other threads:[~2023-06-22 20:58 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 20:54 [PATCH v7 00/27] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-22 20:54 ` [PATCH v7 01/27] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-25 19:34 ` Dan Williams
2023-06-22 20:54 ` [PATCH v7 02/27] cxl: Updates for CXL Test to work with RCH Terry Bowman
2023-06-22 20:54 ` [PATCH v7 03/27] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-22 20:55 ` [PATCH v7 04/27] cxl: Rename member @dport of struct cxl_dport to @dport_dev Terry Bowman
2023-06-22 20:55 ` [PATCH v7 05/27] cxl: Rename 'uport' to 'uport_dev' Terry Bowman
2023-06-22 20:55 ` [PATCH v7 06/27] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-22 20:55 ` [PATCH v7 07/27] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-22 20:55 ` [PATCH v7 08/27] cxl/acpi: Move add_host_bridge_uport() after cxl_get_chbs() Terry Bowman
2023-06-22 20:55 ` Terry Bowman [this message]
2023-06-22 20:55 ` [PATCH v7 10/27] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-22 20:55 ` [PATCH v7 11/27] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-22 20:55 ` [PATCH v7 12/27] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-22 20:55 ` [PATCH v7 13/27] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-22 20:55 ` [PATCH v7 14/27] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-23 13:32 ` Jonathan Cameron
2023-06-22 20:55 ` [PATCH v7 15/27] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Terry Bowman
2023-06-22 20:55 ` [PATCH v7 16/27] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-25 17:38 ` Dan Williams
2023-06-26 14:16 ` Terry Bowman
2023-06-30 19:51 ` Robert Richter
2023-06-30 19:56 ` Robert Richter
2023-07-03 3:55 ` Jonathan Cameron
2023-06-22 20:55 ` [PATCH v7 17/27] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-06-22 20:55 ` [PATCH v7 18/27] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-22 20:55 ` [PATCH v7 19/27] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-22 20:55 ` [PATCH v7 20/27] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-23 21:22 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 21/27] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-23 21:43 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 22/27] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-23 21:58 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 23/27] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-23 22:07 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 24/27] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-23 22:08 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 25/27] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-23 22:16 ` Dave Jiang
2023-06-25 5:47 ` Dan Williams
2023-06-22 20:55 ` [PATCH v7 26/27] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-23 22:18 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 27/27] cxl/core/regs: Rename phys_addr in cxl_map_component_regs() Terry Bowman
2023-06-23 13:30 ` Jonathan Cameron
2023-06-23 22:19 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230622205523.85375-10-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox