From: Terry Bowman <terry.bowman@amd.com>
To: <alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
<ira.weiny@intel.com>, <bwidawsk@kernel.org>,
<dan.j.williams@intel.com>, <dave.jiang@intel.com>,
<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <terry.bowman@amd.com>, <rrichter@amd.com>,
<linux-kernel@vger.kernel.org>, <bhelgaas@google.com>
Subject: [PATCH v7 17/27] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability
Date: Thu, 22 Jun 2023 15:55:13 -0500 [thread overview]
Message-ID: <20230622205523.85375-18-terry.bowman@amd.com> (raw)
In-Reply-To: <20230622205523.85375-1-terry.bowman@amd.com>
From: Robert Richter <rrichter@amd.com>
Now, that the Component Register mappings are stored, use them to
enable and map the HDM decoder capabilities. The Component Registers
do not need to be probed again for this, remove probing code.
The HDM capability applies to Endpoints, USPs and VH Host Bridges. The
Endpoint's component register mappings are located in the cxlds and
else in the port's structure. Provide a helper function
cxl_port_get_comp_map() to locate the mappings depending on the
component's type.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/cxl/core/hdm.c | 59 +++++++++++++++++++++---------------------
1 file changed, 30 insertions(+), 29 deletions(-)
diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index 5abfa9276dac..8dcd9f0b22d8 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -81,26 +81,6 @@ static void parse_hdm_decoder_caps(struct cxl_hdm *cxlhdm)
cxlhdm->interleave_mask |= GENMASK(14, 12);
}
-static int map_hdm_decoder_regs(struct cxl_port *port, void __iomem *crb,
- struct cxl_component_regs *regs)
-{
- struct cxl_register_map map = {
- .dev = &port->dev,
- .resource = port->component_reg_phys,
- .base = crb,
- .max_size = CXL_COMPONENT_REG_BLOCK_SIZE,
- };
-
- cxl_probe_component_regs(&port->dev, crb, &map.component_map);
- if (!map.component_map.hdm_decoder.valid) {
- dev_dbg(&port->dev, "HDM decoder registers not implemented\n");
- /* unique error code to indicate no HDM decoder capability */
- return -ENODEV;
- }
-
- return cxl_map_component_regs(&map, regs, BIT(CXL_CM_CAP_CAP_ID_HDM));
-}
-
static bool should_emulate_decoders(struct cxl_endpoint_dvsec_info *info)
{
struct cxl_hdm *cxlhdm;
@@ -145,6 +125,22 @@ static bool should_emulate_decoders(struct cxl_endpoint_dvsec_info *info)
return true;
}
+static struct cxl_register_map *cxl_port_get_comp_map(struct cxl_port *port)
+{
+ /*
+ * HDM capability applies to Endpoints, USPs and VH Host
+ * Bridges. The Endpoint's component register mappings are
+ * located in the cxlds.
+ */
+ if (is_cxl_endpoint(port)) {
+ struct cxl_memdev *memdev = to_cxl_memdev(port->uport_dev);
+
+ return &memdev->cxlds->comp_map;
+ }
+
+ return &port->comp_map;
+}
+
/**
* devm_cxl_setup_hdm - map HDM decoder component registers
* @port: cxl_port to map
@@ -155,7 +151,7 @@ struct cxl_hdm *devm_cxl_setup_hdm(struct cxl_port *port,
{
struct device *dev = &port->dev;
struct cxl_hdm *cxlhdm;
- void __iomem *crb;
+ struct cxl_register_map *comp_map;
int rc;
cxlhdm = devm_kzalloc(dev, sizeof(*cxlhdm), GFP_KERNEL);
@@ -164,19 +160,24 @@ struct cxl_hdm *devm_cxl_setup_hdm(struct cxl_port *port,
cxlhdm->port = port;
dev_set_drvdata(dev, cxlhdm);
- crb = ioremap(port->component_reg_phys, CXL_COMPONENT_REG_BLOCK_SIZE);
- if (!crb && info && info->mem_enabled) {
- cxlhdm->decoder_count = info->ranges;
- return cxlhdm;
- } else if (!crb) {
+ comp_map = cxl_port_get_comp_map(port);
+
+ if (!comp_map->component_map.hdm_decoder.valid) {
+ dev_dbg(&port->dev, "HDM decoder registers not found\n");
+ if (info && info->mem_enabled) {
+ cxlhdm->decoder_count = info->ranges;
+ return cxlhdm;
+ }
dev_err(dev, "No component registers mapped\n");
return ERR_PTR(-ENXIO);
}
- rc = map_hdm_decoder_regs(port, crb, &cxlhdm->regs);
- iounmap(crb);
- if (rc)
+ rc = cxl_map_component_regs(comp_map, &cxlhdm->regs,
+ BIT(CXL_CM_CAP_CAP_ID_HDM));
+ if (rc) {
+ dev_dbg(dev, "Failed to map HDM capability.\n");
return ERR_PTR(rc);
+ }
parse_hdm_decoder_caps(cxlhdm);
if (cxlhdm->decoder_count == 0) {
--
2.34.1
next prev parent reply other threads:[~2023-06-22 21:02 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 20:54 [PATCH v7 00/27] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-22 20:54 ` [PATCH v7 01/27] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-25 19:34 ` Dan Williams
2023-06-22 20:54 ` [PATCH v7 02/27] cxl: Updates for CXL Test to work with RCH Terry Bowman
2023-06-22 20:54 ` [PATCH v7 03/27] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-22 20:55 ` [PATCH v7 04/27] cxl: Rename member @dport of struct cxl_dport to @dport_dev Terry Bowman
2023-06-22 20:55 ` [PATCH v7 05/27] cxl: Rename 'uport' to 'uport_dev' Terry Bowman
2023-06-22 20:55 ` [PATCH v7 06/27] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-22 20:55 ` [PATCH v7 07/27] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-22 20:55 ` [PATCH v7 08/27] cxl/acpi: Move add_host_bridge_uport() after cxl_get_chbs() Terry Bowman
2023-06-22 20:55 ` [PATCH v7 09/27] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-22 20:55 ` [PATCH v7 10/27] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-22 20:55 ` [PATCH v7 11/27] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-22 20:55 ` [PATCH v7 12/27] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-22 20:55 ` [PATCH v7 13/27] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-22 20:55 ` [PATCH v7 14/27] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-23 13:32 ` Jonathan Cameron
2023-06-22 20:55 ` [PATCH v7 15/27] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Terry Bowman
2023-06-22 20:55 ` [PATCH v7 16/27] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-25 17:38 ` Dan Williams
2023-06-26 14:16 ` Terry Bowman
2023-06-30 19:51 ` Robert Richter
2023-06-30 19:56 ` Robert Richter
2023-07-03 3:55 ` Jonathan Cameron
2023-06-22 20:55 ` Terry Bowman [this message]
2023-06-22 20:55 ` [PATCH v7 18/27] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-22 20:55 ` [PATCH v7 19/27] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-22 20:55 ` [PATCH v7 20/27] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-23 21:22 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 21/27] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-23 21:43 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 22/27] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-23 21:58 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 23/27] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-23 22:07 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 24/27] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-23 22:08 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 25/27] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-23 22:16 ` Dave Jiang
2023-06-25 5:47 ` Dan Williams
2023-06-22 20:55 ` [PATCH v7 26/27] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-23 22:18 ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 27/27] cxl/core/regs: Rename phys_addr in cxl_map_component_regs() Terry Bowman
2023-06-23 13:30 ` Jonathan Cameron
2023-06-23 22:19 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230622205523.85375-18-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox