From: Manivannan Sadhasivam <mani@kernel.org>
To: Devi Priya <quic_devipriy@quicinc.com>
Cc: agross@kernel.org, andersson@kernel.org,
konrad.dybcio@linaro.org, lpieralisi@kernel.org, kw@linux.com,
robh@kernel.org, bhelgaas@google.com,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, quic_srichara@quicinc.com,
quic_sjaganat@quicinc.com, quic_kathirav@quicinc.com,
quic_anusha@quicinc.com, quic_ipkumar@quicinc.com
Subject: Re: [PATCH] PCI: qcom: configure the parf halt window size to 1GB
Date: Sat, 24 Jun 2023 11:53:44 +0530 [thread overview]
Message-ID: <20230624062344.GE5611@thinkpad> (raw)
In-Reply-To: <20230623045731.29397-1-quic_devipriy@quicinc.com>
On Fri, Jun 23, 2023 at 10:27:31AM +0530, Devi Priya wrote:
> Configure the ADDR_BIT_INDEX of PARF_AXI_MSTR_WR_ADDR_HALT_V2 register with
> 0x1E to increase the halt window size to 1GB so that, when new inbound
> posted write transactions whose address crosses 1G address range, the
> controller would halt all the incoming writes until all the previous AXI
> responses are received.
>
Can you explain how the value of 0x1e corresponds to 1GB window size?
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
> This patch depends on the below series which adds support for PCIe
> controllers in IPQ9574
> https://lore.kernel.org/linux-arm-msm/20230519090219.15925-1-quic_devipriy@quicinc.com/
>
> drivers/pci/controller/dwc/pcie-qcom.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index c7579dfa5b1c..26c40e006120 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -116,6 +116,8 @@
>
> /* PARF_AXI_MSTR_WR_ADDR_HALT register fields */
> #define EN BIT(31)
> +#define ADDR_BIT_INDEX (BIT(0) | BIT(1) | BIT(2) | \
> + BIT(3) | BIT(4) | BIT(5))
GENMASK(5, 0)
>
> /* PARF_LTSSM register fields */
> #define LTSSM_EN BIT(8)
> @@ -154,6 +156,8 @@
>
> #define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0))
>
> +#define PARF_AXI_MSTR_WR_ADDR_HALT_WINDOW_SIZE 0x1e
GENMASK(4, 1) as these are address bits.
- Mani
> +
> #define QCOM_PCIE_1_0_0_MAX_CLOCKS 4
> struct qcom_pcie_resources_1_0_0 {
> struct clk_bulk_data clks[QCOM_PCIE_1_0_0_MAX_CLOCKS];
> @@ -1126,6 +1130,11 @@ static int qcom_pcie_post_init(struct qcom_pcie *pcie)
>
> writel(0, pcie->parf + PARF_Q2A_FLUSH);
>
> + val = readl(pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
> + val &= ~ADDR_BIT_INDEX;
> + writel(val | PARF_AXI_MSTR_WR_ADDR_HALT_WINDOW_SIZE, pcie->parf +
> + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
> +
> dw_pcie_dbi_ro_wr_en(pci);
> writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
>
> --
> 2.17.1
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2023-06-24 6:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-23 4:57 [PATCH] PCI: qcom: configure the parf halt window size to 1GB Devi Priya
2023-06-23 10:17 ` Konrad Dybcio
2023-07-05 10:25 ` Devi Priya
2023-06-24 6:23 ` Manivannan Sadhasivam [this message]
2023-07-05 10:27 ` Devi Priya
2023-07-10 3:22 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230624062344.GE5611@thinkpad \
--to=mani@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=konrad.dybcio@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=quic_anusha@quicinc.com \
--cc=quic_devipriy@quicinc.com \
--cc=quic_ipkumar@quicinc.com \
--cc=quic_kathirav@quicinc.com \
--cc=quic_sjaganat@quicinc.com \
--cc=quic_srichara@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox