[PATCH 5/8] clk: qcom: lpasscc-sc7280: fix missing resume during probe

[Johan Hovold <johan+linaro@kernel.org>]

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Cc: stable@vger.kernel.org      # 5.16
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/clk/qcom/lpasscc-sc7280.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/lpasscc-sc7280.c b/drivers/clk/qcom/lpasscc-sc7280.c
index 0df2b29e95e3..e6b815aec46a 100644
--- a/drivers/clk/qcom/lpasscc-sc7280.c
+++ b/drivers/clk/qcom/lpasscc-sc7280.c
@@ -118,9 +118,13 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev)
 	ret = pm_clk_add(&pdev->dev, "iface");
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to acquire iface clock\n");
-		goto destroy_pm_clk;
+		goto err_destroy_pm_clk;
 	}
 
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		goto err_destroy_pm_clk;
+
 	if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-pil-mode")) {
 		lpass_regmap_config.name = "qdsp6ss";
 		lpass_regmap_config.max_register = 0x3f;
@@ -128,7 +132,7 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev)
 
 		ret = qcom_cc_probe_by_index(pdev, 0, desc);
 		if (ret)
-			goto destroy_pm_clk;
+			goto err_put_rpm;
 	}
 
 	lpass_regmap_config.name = "top_cc";
@@ -137,11 +141,15 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev)
 
 	ret = qcom_cc_probe_by_index(pdev, 1, desc);
 	if (ret)
-		goto destroy_pm_clk;
+		goto err_put_rpm;
+
+	pm_runtime_put(&pdev->dev);
 
 	return 0;
 
-destroy_pm_clk:
+err_put_rpm:
+	pm_runtime_put_sync(&pdev->dev);
+err_destroy_pm_clk:
 	pm_clk_destroy(&pdev->dev);
 
 	return ret;
-- 
2.41.0