[PATCH 6/8] clk: qcom: q6sstop-qcs404: fix missing resume during probe

[Johan Hovold <johan+linaro@kernel.org>]

Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 6cdef2738db0 ("clk: qcom: Add Q6SSTOP clock controller for QCS404")
Cc: stable@vger.kernel.org      # 5.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/clk/qcom/q6sstop-qcs404.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/q6sstop-qcs404.c b/drivers/clk/qcom/q6sstop-qcs404.c
index 780074e05841..26e2d63614ac 100644
--- a/drivers/clk/qcom/q6sstop-qcs404.c
+++ b/drivers/clk/qcom/q6sstop-qcs404.c
@@ -174,21 +174,32 @@ static int q6sstopcc_qcs404_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
+
 	q6sstop_regmap_config.name = "q6sstop_tcsr";
 	desc = &tcsr_qcs404_desc;
 
 	ret = qcom_cc_probe_by_index(pdev, 1, desc);
 	if (ret)
-		return ret;
+		goto err_put_rpm;
 
 	q6sstop_regmap_config.name = "q6sstop_cc";
 	desc = &q6sstop_qcs404_desc;
 
 	ret = qcom_cc_probe_by_index(pdev, 0, desc);
 	if (ret)
-		return ret;
+		goto err_put_rpm;
+
+	pm_runtime_put(&pdev->dev);
 
 	return 0;
+
+err_put_rpm:
+	pm_runtime_put_sync(&pdev->dev);
+
+	return ret;
 }
 
 static const struct dev_pm_ops q6sstopcc_pm_ops = {
-- 
2.41.0