From: Arnd Bergmann <arnd@kernel.org>
To: "William Breathitt Gray" <william.gray@linaro.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Lee Jones" <lee@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Biju Das" <biju.das.jz@bp.renesas.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
Peter Robinson <pbrobinson@gmail.com>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pwm@vger.kernel.org
Subject: [PATCH] mfd: rz-mtu3: link time dependencies
Date: Wed, 19 Jul 2023 11:02:23 +0200 [thread overview]
Message-ID: <20230719090430.1925182-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd@arndb.de>
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Fixes: 254d3a727421c ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be8907359df4 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e1687b ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/counter/Kconfig | 2 +-
drivers/pwm/Kconfig | 2 +-
include/linux/mfd/rz-mtu3.h | 66 -------------------------------------
3 files changed, 2 insertions(+), 68 deletions(-)
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 62962ae84b77d..497bc05dca4df 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -92,7 +92,7 @@ config MICROCHIP_TCB_CAPTURE
config RZ_MTU3_CNT
tristate "Renesas RZ/G2L MTU3a counter driver"
- depends on RZ_MTU3 || COMPILE_TEST
+ depends on RZ_MTU3
help
Enable support for MTU3a counter driver found on Renesas RZ/G2L alike
SoCs. This IP supports both 16-bit and 32-bit phase counting mode
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 6210babb0741a..8ebcddf91f7b7 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -505,7 +505,7 @@ config PWM_ROCKCHIP
config PWM_RZ_MTU3
tristate "Renesas RZ/G2L MTU3a PWM Timer support"
- depends on RZ_MTU3 || COMPILE_TEST
+ depends on RZ_MTU3
depends on HAS_IOMEM
help
This driver exposes the MTU3a PWM Timer controller found in Renesas
diff --git a/include/linux/mfd/rz-mtu3.h b/include/linux/mfd/rz-mtu3.h
index c5173bc062701..8421d49500bf4 100644
--- a/include/linux/mfd/rz-mtu3.h
+++ b/include/linux/mfd/rz-mtu3.h
@@ -151,7 +151,6 @@ struct rz_mtu3 {
void *priv_data;
};
-#if IS_ENABLED(CONFIG_RZ_MTU3)
static inline bool rz_mtu3_request_channel(struct rz_mtu3_channel *ch)
{
mutex_lock(&ch->lock);
@@ -188,70 +187,5 @@ void rz_mtu3_32bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u32 val);
void rz_mtu3_shared_reg_write(struct rz_mtu3_channel *ch, u16 off, u16 val);
void rz_mtu3_shared_reg_update_bit(struct rz_mtu3_channel *ch, u16 off,
u16 pos, u8 val);
-#else
-static inline bool rz_mtu3_request_channel(struct rz_mtu3_channel *ch)
-{
- return false;
-}
-
-static inline void rz_mtu3_release_channel(struct rz_mtu3_channel *ch)
-{
-}
-
-static inline bool rz_mtu3_is_enabled(struct rz_mtu3_channel *ch)
-{
- return false;
-}
-
-static inline void rz_mtu3_disable(struct rz_mtu3_channel *ch)
-{
-}
-
-static inline int rz_mtu3_enable(struct rz_mtu3_channel *ch)
-{
- return 0;
-}
-
-static inline u8 rz_mtu3_8bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
-{
- return 0;
-}
-
-static inline u16 rz_mtu3_16bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
-{
- return 0;
-}
-
-static inline u32 rz_mtu3_32bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
-{
- return 0;
-}
-
-static inline u16 rz_mtu3_shared_reg_read(struct rz_mtu3_channel *ch, u16 off)
-{
- return 0;
-}
-
-static inline void rz_mtu3_8bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u8 val)
-{
-}
-
-static inline void rz_mtu3_16bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u16 val)
-{
-}
-
-static inline void rz_mtu3_32bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u32 val)
-{
-}
-
-static inline void rz_mtu3_shared_reg_write(struct rz_mtu3_channel *ch, u16 off, u16 val)
-{
-}
-
-static inline void rz_mtu3_shared_reg_update_bit(struct rz_mtu3_channel *ch,
- u16 off, u16 pos, u8 val)
-{
-}
-#endif
#endif /* __MFD_RZ_MTU3_H__ */
--
2.39.2
next reply other threads:[~2023-07-19 9:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-19 9:02 Arnd Bergmann [this message]
2023-07-19 9:11 ` [PATCH] mfd: rz-mtu3: link time dependencies Biju Das
2023-07-20 15:00 ` Thierry Reding
2023-07-21 8:00 ` Lee Jones
2023-07-21 12:20 ` Thierry Reding
2023-07-28 10:57 ` (subset) " Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230719090430.1925182-1-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=biju.das.jz@bp.renesas.com \
--cc=lee@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=pbrobinson@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=william.gray@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox