From: Luca Ceresoli <luca.ceresoli@bootlin.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Subject: [PATCH 2/3] dt-bindings: display: panel: Add panels based on ILITEK ILI9806E
Date: Wed, 19 Jul 2023 17:21:46 +0200 [thread overview]
Message-ID: <20230719152147.355486-2-luca.ceresoli@bootlin.com> (raw)
In-Reply-To: <20230719152147.355486-1-luca.ceresoli@bootlin.com>
Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
480x800 panel based on it.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
.../display/panel/ilitek,ili9806e.yaml | 69 +++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 75 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
new file mode 100644
index 000000000000..42abc6923065
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9806E display panels
+
+maintainers:
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description:
+ This binding is for display panels using an Ilitek ILI9806E controller in
+ SPI mode.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD
+ - newdisplay,nds040480800-v3
+ - const: ilitek,ili9806e
+
+ reg: true
+ spi-max-frequency: true
+ reset-gpios: true
+ backlight: true
+ port: true
+
+required:
+ - compatible
+ - reg
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "newdisplay,nds040480800-v3", "ilitek,ili9806e";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdgpios>;
+ reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ port {
+ ili9806e_in: endpoint {
+ remote-endpoint = <&lcdif_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index aee340630eca..3c38699ee821 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6515,6 +6515,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
F: drivers/gpu/drm/tiny/ili9486.c
+DRM DRIVER FOR ILITEK ILI9806E PANELS
+M: Luca Ceresoli <luca.ceresoli@bootlin.com>
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
+
DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS
M: Jagan Teki <jagan@edgeble.ai>
S: Maintained
--
2.34.1
next prev parent reply other threads:[~2023-07-19 15:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-19 15:21 [PATCH 1/3] dt-bindings: vendor-prefixes: add ShenZhen New Display Co Luca Ceresoli
2023-07-19 15:21 ` Luca Ceresoli [this message]
2023-07-19 16:44 ` [PATCH 2/3] dt-bindings: display: panel: Add panels based on ILITEK ILI9806E Conor Dooley
2023-07-20 13:52 ` Luca Ceresoli
2023-07-19 19:02 ` Rob Herring
2023-07-20 13:52 ` Luca Ceresoli
2023-07-24 14:31 ` Rob Herring
2023-07-19 19:12 ` Krzysztof Kozlowski
2023-07-20 13:52 ` Luca Ceresoli
2023-07-19 15:21 ` [PATCH 3/3] DRM: panel: add Ilitek ILI9806E driver Luca Ceresoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230719152147.355486-2-luca.ceresoli@bootlin.com \
--to=luca.ceresoli@bootlin.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox