[PATCH v3 1/3] peci: cpu: Add Intel Sapphire Rapids support

[PATCH v3 1/3] peci: cpu: Add Intel Sapphire Rapids support

[Naresh Solanki]

Add support for detection of Intel Sapphire Rapids processor based on
CPU family & model.

Sapphire Rapids Xeon processors with the family set to 6 and the
model set to INTEL_FAM6_SAPPHIRERAPIDS_X. The data field for this entry
is "spr".

Tested the patch series with AST2600 BMC with 4S Intel Sapphire Rapids
processors & verified by reading cpu & dimm temperature.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
Changes in V3:
- Move spr entry at end of struct peci_cpu_device_ids
- Mention test with the patch.
Changes in V2:
- Refactored from previous patchset as seperate patch based on subsystem.
---
 drivers/peci/cpu.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/peci/cpu.c b/drivers/peci/cpu.c
index de4a7b3e5966..bd990acd92b8 100644
--- a/drivers/peci/cpu.c
+++ b/drivers/peci/cpu.c
@@ -323,6 +323,11 @@ static const struct peci_device_id peci_cpu_device_ids[] = {
 		.model	= INTEL_FAM6_ICELAKE_D,
 		.data	= "icxd",
 	},
+	{ /* Sapphire Rapids Xeon */
+		.family	= 6,
+		.model	= INTEL_FAM6_SAPPHIRERAPIDS_X,
+		.data	= "spr",
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(peci, peci_cpu_device_ids);

base-commit: 4dbbaf8fbdbd13adc80731b2452257857e4c2d8b
-- 
2.41.0

[PATCH v3 2/3] hwmon: (peci/cputemp) Add Intel Sapphire Rapids support

[Naresh Solanki]

From: Patrick Rudolph <patrick.rudolph@9elements.com>

Add support to read DTS for reading Intel Sapphire Rapids platform.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
Chagnes in V3:
- Update Acked-by in commit message.
Changes in V2:
- Refactored from previous patchset as seperate patch based on subsystem.
---
 drivers/hwmon/peci/cputemp.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c
index e5b65a382772..a812c15948d9 100644
--- a/drivers/hwmon/peci/cputemp.c
+++ b/drivers/hwmon/peci/cputemp.c
@@ -363,6 +363,7 @@ static int init_core_mask(struct peci_cputemp *priv)
 	switch (peci_dev->info.model) {
 	case INTEL_FAM6_ICELAKE_X:
 	case INTEL_FAM6_ICELAKE_D:
+	case INTEL_FAM6_SAPPHIRERAPIDS_X:
 		ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
 					     reg->func, reg->offset + 4, &data);
 		if (ret)
@@ -531,6 +532,13 @@ static struct resolved_cores_reg resolved_cores_reg_icx = {
 	.offset = 0xd0,
 };
 
+static struct resolved_cores_reg resolved_cores_reg_spr = {
+	.bus = 31,
+	.dev = 30,
+	.func = 6,
+	.offset = 0x80,
+};
+
 static const struct cpu_info cpu_hsx = {
 	.reg		= &resolved_cores_reg_hsx,
 	.min_peci_revision = 0x33,
@@ -549,6 +557,12 @@ static const struct cpu_info cpu_icx = {
 	.thermal_margin_to_millidegree = &dts_ten_dot_six_to_millidegree,
 };
 
+static const struct cpu_info cpu_spr = {
+	.reg		= &resolved_cores_reg_spr,
+	.min_peci_revision = 0x40,
+	.thermal_margin_to_millidegree = &dts_ten_dot_six_to_millidegree,
+};
+
 static const struct auxiliary_device_id peci_cputemp_ids[] = {
 	{
 		.name = "peci_cpu.cputemp.hsx",
@@ -574,6 +588,10 @@ static const struct auxiliary_device_id peci_cputemp_ids[] = {
 		.name = "peci_cpu.cputemp.icxd",
 		.driver_data = (kernel_ulong_t)&cpu_icx,
 	},
+	{
+		.name = "peci_cpu.cputemp.spr",
+		.driver_data = (kernel_ulong_t)&cpu_spr,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);
-- 
2.41.0

Re: [PATCH v3 2/3] hwmon: (peci/cputemp) Add Intel Sapphire Rapids support

[Winiarska, Iwona]

On Wed, 2023-07-19 at 20:41 +0200, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
> 
> Add support to read DTS for reading Intel Sapphire Rapids platform.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net>

Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>

Thanks
-Iwona

> ---
> Chagnes in V3:
> - Update Acked-by in commit message.
> Changes in V2:
> - Refactored from previous patchset as seperate patch based on subsystem.
> ---
>  drivers/hwmon/peci/cputemp.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c
> index e5b65a382772..a812c15948d9 100644
> --- a/drivers/hwmon/peci/cputemp.c
> +++ b/drivers/hwmon/peci/cputemp.c
> @@ -363,6 +363,7 @@ static int init_core_mask(struct peci_cputemp *priv)
>         switch (peci_dev->info.model) {
>         case INTEL_FAM6_ICELAKE_X:
>         case INTEL_FAM6_ICELAKE_D:
> +       case INTEL_FAM6_SAPPHIRERAPIDS_X:
>                 ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
>                                              reg->func, reg->offset + 4,
> &data);
>                 if (ret)
> @@ -531,6 +532,13 @@ static struct resolved_cores_reg resolved_cores_reg_icx =
> {
>         .offset = 0xd0,
>  };
>  
> +static struct resolved_cores_reg resolved_cores_reg_spr = {
> +       .bus = 31,
> +       .dev = 30,
> +       .func = 6,
> +       .offset = 0x80,
> +};
> +
>  static const struct cpu_info cpu_hsx = {
>         .reg            = &resolved_cores_reg_hsx,
>         .min_peci_revision = 0x33,
> @@ -549,6 +557,12 @@ static const struct cpu_info cpu_icx = {
>         .thermal_margin_to_millidegree = &dts_ten_dot_six_to_millidegree,
>  };
>  
> +static const struct cpu_info cpu_spr = {
> +       .reg            = &resolved_cores_reg_spr,
> +       .min_peci_revision = 0x40,
> +       .thermal_margin_to_millidegree = &dts_ten_dot_six_to_millidegree,
> +};
> +
>  static const struct auxiliary_device_id peci_cputemp_ids[] = {
>         {
>                 .name = "peci_cpu.cputemp.hsx",
> @@ -574,6 +588,10 @@ static const struct auxiliary_device_id
> peci_cputemp_ids[] = {
>                 .name = "peci_cpu.cputemp.icxd",
>                 .driver_data = (kernel_ulong_t)&cpu_icx,
>         },
> +       {
> +               .name = "peci_cpu.cputemp.spr",
> +               .driver_data = (kernel_ulong_t)&cpu_spr,
> +       },
>         { }
>  };
>  MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);

[PATCH v3 3/3] hwmon: (peci/dimmtemp) Add Sapphire Rapids support

[Naresh Solanki]

From: Patrick Rudolph <patrick.rudolph@9elements.com>

This patch extends the functionality of the hwmon (peci/dimmtemp) to
include support for Sapphire Rapids platform.

Sapphire Rapids can accommodate up to 8 CPUs, each with 16 DIMMs. To
accommodate this configuration, the maximum supported DIMM count is
increased, and the corresponding Sapphire Rapids ID and threshold code
are added.

The patch has been tested on a 4S system with 64 DIMMs installed.
Default thresholds are utilized for Sapphire Rapids, as accessing the
threshold requires accessing the UBOX device on Uncore bus 0, which can
only be achieved using MSR access. The non-PCI-compliant MMIO BARs are
not available for this purpose.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
Changes in V3:
- Update Acked-by in commit message.
Changes in V2:
- Update subject.
---
 drivers/hwmon/peci/dimmtemp.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/peci/dimmtemp.c b/drivers/hwmon/peci/dimmtemp.c
index ed968401f93c..edafbfd66fef 100644
--- a/drivers/hwmon/peci/dimmtemp.c
+++ b/drivers/hwmon/peci/dimmtemp.c
@@ -30,8 +30,10 @@
 #define DIMM_IDX_MAX_ON_ICX	2
 #define CHAN_RANK_MAX_ON_ICXD	4
 #define DIMM_IDX_MAX_ON_ICXD	2
+#define CHAN_RANK_MAX_ON_SPR	128
+#define DIMM_IDX_MAX_ON_SPR	2
 
-#define CHAN_RANK_MAX		CHAN_RANK_MAX_ON_HSX
+#define CHAN_RANK_MAX		CHAN_RANK_MAX_ON_SPR
 #define DIMM_IDX_MAX		DIMM_IDX_MAX_ON_HSX
 #define DIMM_NUMS_MAX		(CHAN_RANK_MAX * DIMM_IDX_MAX)
 
@@ -530,6 +532,15 @@ read_thresholds_icx(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u
 	return 0;
 }
 
+static int
+read_thresholds_spr(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
+{
+	/* Use defaults */
+	*data = (95 << 16) | (90 << 8);
+
+	return 0;
+}
+
 static const struct dimm_info dimm_hsx = {
 	.chan_rank_max	= CHAN_RANK_MAX_ON_HSX,
 	.dimm_idx_max	= DIMM_IDX_MAX_ON_HSX,
@@ -572,6 +583,13 @@ static const struct dimm_info dimm_icxd = {
 	.read_thresholds = &read_thresholds_icx,
 };
 
+static const struct dimm_info dimm_spr = {
+	.chan_rank_max	= CHAN_RANK_MAX_ON_SPR,
+	.dimm_idx_max	= DIMM_IDX_MAX_ON_SPR,
+	.min_peci_revision = 0x40,
+	.read_thresholds = &read_thresholds_spr,
+};
+
 static const struct auxiliary_device_id peci_dimmtemp_ids[] = {
 	{
 		.name = "peci_cpu.dimmtemp.hsx",
@@ -597,6 +615,10 @@ static const struct auxiliary_device_id peci_dimmtemp_ids[] = {
 		.name = "peci_cpu.dimmtemp.icxd",
 		.driver_data = (kernel_ulong_t)&dimm_icxd,
 	},
+	{
+		.name = "peci_cpu.dimmtemp.spr",
+		.driver_data = (kernel_ulong_t)&dimm_spr,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(auxiliary, peci_dimmtemp_ids);
-- 
2.41.0

Re: [PATCH v3 3/3] hwmon: (peci/dimmtemp) Add Sapphire Rapids support

[Winiarska, Iwona]

On Wed, 2023-07-19 at 20:41 +0200, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
> 
> This patch extends the functionality of the hwmon (peci/dimmtemp) to
> include support for Sapphire Rapids platform.
> 
> Sapphire Rapids can accommodate up to 8 CPUs, each with 16 DIMMs. To
> accommodate this configuration, the maximum supported DIMM count is
> increased, and the corresponding Sapphire Rapids ID and threshold code
> are added.
> 
> The patch has been tested on a 4S system with 64 DIMMs installed.
> Default thresholds are utilized for Sapphire Rapids, as accessing the
> threshold requires accessing the UBOX device on Uncore bus 0, which can
> only be achieved using MSR access. The non-PCI-compliant MMIO BARs are
> not available for this purpose.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
> Changes in V3:
> - Update Acked-by in commit message.
> Changes in V2:
> - Update subject.
> ---
>  drivers/hwmon/peci/dimmtemp.c | 24 +++++++++++++++++++++++-
>  1 file changed, 23 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/peci/dimmtemp.c b/drivers/hwmon/peci/dimmtemp.c
> index ed968401f93c..edafbfd66fef 100644
> --- a/drivers/hwmon/peci/dimmtemp.c
> +++ b/drivers/hwmon/peci/dimmtemp.c
> @@ -30,8 +30,10 @@
>  #define DIMM_IDX_MAX_ON_ICX    2
>  #define CHAN_RANK_MAX_ON_ICXD  4
>  #define DIMM_IDX_MAX_ON_ICXD   2
> +#define CHAN_RANK_MAX_ON_SPR   128

Where was this number taken from?
Single CPU has 8 channels (not 128), and dimmtemp hwmon binds to a single CPU.

> +#define DIMM_IDX_MAX_ON_SPR    2
>  
> -#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_HSX
> +#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_SPR

Then - there's no need for changing the MAX value.

>  #define DIMM_IDX_MAX           DIMM_IDX_MAX_ON_HSX
>  #define DIMM_NUMS_MAX          (CHAN_RANK_MAX * DIMM_IDX_MAX)
>  
> @@ -530,6 +532,15 @@ read_thresholds_icx(struct peci_dimmtemp *priv, int
> dimm_order, int chan_rank, u
>         return 0;
>  }
>  
> +static int
> +read_thresholds_spr(struct peci_dimmtemp *priv, int dimm_order, int
> chan_rank, u32 *data)
> +{
> +       /* Use defaults */
> +       *data = (95 << 16) | (90 << 8);
> +
> +       return 0;
> +}
> +

Rather than hardcoding the defaults, it should be possible to compute it in a
similar way to ICX (and with that - commit message should be updated).
We're starting from 1e:00.2 instead of 13:00.2, and offsets within IMC start
from 0x219a8 with 0x8000 shift.
It would look like this (note - not tested on actual SPR):

static int
read_thresholds_spr(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
{
	u32 reg_val;
	u64 offset;
	int ret;
	u8 dev;

	ret = peci_ep_pci_local_read(priv->peci_dev, 0, 30, 0, 2, 0xd4, &reg_val);
	if (ret || !(reg_val & BIT(31)))
		return -ENODATA; /* Use default or previous value */

	ret = peci_ep_pci_local_read(priv->peci_dev, 0, 30, 0, 2, 0xd0, &reg_val);
	if (ret)
		return -ENODATA; /* Use default or previous value */

	/*
	 * Device 26, Offset 219a8: IMC 0 channel 0 -> rank 0
	 * Device 26, Offset 299a8: IMC 0 channel 1 -> rank 1
	 * Device 27, Offset 219a8: IMC 1 channel 0 -> rank 2
	 * Device 27, Offset 299a8: IMC 1 channel 1 -> rank 3
	 * Device 28, Offset 219a8: IMC 2 channel 0 -> rank 4
	 * Device 28, Offset 299a8: IMC 2 channel 1 -> rank 5
	 * Device 29, Offset 219a8: IMC 3 channel 0 -> rank 6
	 * Device 29, Offset 299a8: IMC 3 channel 1 -> rank 7
	 */
	dev = 26 + chan_rank / 2;
	offset = 0x219a8 + dimm_order * 4 + (chan_rank % 2) * 0x8000;

	ret = peci_mmio_read(priv->peci_dev, 0, GET_CPU_SEG(reg_val), GET_CPU_BUS(reg_val),
			     dev, 0, offset, data);
	if (ret)
		return ret;

	return 0;
}

Thanks
-Iwona

>  static const struct dimm_info dimm_hsx = {
>         .chan_rank_max  = CHAN_RANK_MAX_ON_HSX,
>         .dimm_idx_max   = DIMM_IDX_MAX_ON_HSX,
> @@ -572,6 +583,13 @@ static const struct dimm_info dimm_icxd = {
>         .read_thresholds = &read_thresholds_icx,
>  };
>  
> +static const struct dimm_info dimm_spr = {
> +       .chan_rank_max  = CHAN_RANK_MAX_ON_SPR,
> +       .dimm_idx_max   = DIMM_IDX_MAX_ON_SPR,
> +       .min_peci_revision = 0x40,
> +       .read_thresholds = &read_thresholds_spr,
> +};
> +
>  static const struct auxiliary_device_id peci_dimmtemp_ids[] = {
>         {
>                 .name = "peci_cpu.dimmtemp.hsx",
> @@ -597,6 +615,10 @@ static const struct auxiliary_device_id
> peci_dimmtemp_ids[] = {
>                 .name = "peci_cpu.dimmtemp.icxd",
>                 .driver_data = (kernel_ulong_t)&dimm_icxd,
>         },
> +       {
> +               .name = "peci_cpu.dimmtemp.spr",
> +               .driver_data = (kernel_ulong_t)&dimm_spr,
> +       },
>         { }
>  };
>  MODULE_DEVICE_TABLE(auxiliary, peci_dimmtemp_ids);

Re: [PATCH v3 3/3] hwmon: (peci/dimmtemp) Add Sapphire Rapids support

[Naresh Solanki]

Hi Iwona,

On Thu, 20 Jul 2023 at 01:35, Winiarska, Iwona
<iwona.winiarska@intel.com> wrote:
>
> On Wed, 2023-07-19 at 20:41 +0200, Naresh Solanki wrote:
> > From: Patrick Rudolph <patrick.rudolph@9elements.com>
> >
> > This patch extends the functionality of the hwmon (peci/dimmtemp) to
> > include support for Sapphire Rapids platform.
> >
> > Sapphire Rapids can accommodate up to 8 CPUs, each with 16 DIMMs. To
> > accommodate this configuration, the maximum supported DIMM count is
> > increased, and the corresponding Sapphire Rapids ID and threshold code
> > are added.
> >
> > The patch has been tested on a 4S system with 64 DIMMs installed.
> > Default thresholds are utilized for Sapphire Rapids, as accessing the
> > threshold requires accessing the UBOX device on Uncore bus 0, which can
> > only be achieved using MSR access. The non-PCI-compliant MMIO BARs are
> > not available for this purpose.
> >
> > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> > Acked-by: Guenter Roeck <linux@roeck-us.net>
> > ---
> > Changes in V3:
> > - Update Acked-by in commit message.
> > Changes in V2:
> > - Update subject.
> > ---
> >  drivers/hwmon/peci/dimmtemp.c | 24 +++++++++++++++++++++++-
> >  1 file changed, 23 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/hwmon/peci/dimmtemp.c b/drivers/hwmon/peci/dimmtemp.c
> > index ed968401f93c..edafbfd66fef 100644
> > --- a/drivers/hwmon/peci/dimmtemp.c
> > +++ b/drivers/hwmon/peci/dimmtemp.c
> > @@ -30,8 +30,10 @@
> >  #define DIMM_IDX_MAX_ON_ICX    2
> >  #define CHAN_RANK_MAX_ON_ICXD  4
> >  #define DIMM_IDX_MAX_ON_ICXD   2
> > +#define CHAN_RANK_MAX_ON_SPR   128
>
> Where was this number taken from?
> Single CPU has 8 channels (not 128), and dimmtemp hwmon binds to a single CPU.
>
> > +#define DIMM_IDX_MAX_ON_SPR    2
> >
> > -#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_HSX
> > +#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_SPR
>
> Then - there's no need for changing the MAX value.
>
> >  #define DIMM_IDX_MAX           DIMM_IDX_MAX_ON_HSX
> >  #define DIMM_NUMS_MAX          (CHAN_RANK_MAX * DIMM_IDX_MAX)
> >
> > @@ -530,6 +532,15 @@ read_thresholds_icx(struct peci_dimmtemp *priv, int
> > dimm_order, int chan_rank, u
> >         return 0;
> >  }
> >
> > +static int
> > +read_thresholds_spr(struct peci_dimmtemp *priv, int dimm_order, int
> > chan_rank, u32 *data)
> > +{
> > +       /* Use defaults */
> > +       *data = (95 << 16) | (90 << 8);
> > +
> > +       return 0;
> > +}
> > +
>
> Rather than hardcoding the defaults, it should be possible to compute it in a
> similar way to ICX (and with that - commit message should be updated).
> We're starting from 1e:00.2 instead of 13:00.2, and offsets within IMC start
> from 0x219a8 with 0x8000 shift.
> It would look like this (note - not tested on actual SPR):
Thanks for the input. Will test & keep you posted.

Regards,
Naresh
>
> static int
> read_thresholds_spr(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
> {
>         u32 reg_val;
>         u64 offset;
>         int ret;
>         u8 dev;
>
>         ret = peci_ep_pci_local_read(priv->peci_dev, 0, 30, 0, 2, 0xd4, &reg_val);
>         if (ret || !(reg_val & BIT(31)))
>                 return -ENODATA; /* Use default or previous value */
>
>         ret = peci_ep_pci_local_read(priv->peci_dev, 0, 30, 0, 2, 0xd0, &reg_val);
>         if (ret)
>                 return -ENODATA; /* Use default or previous value */
>
>         /*
>          * Device 26, Offset 219a8: IMC 0 channel 0 -> rank 0
>          * Device 26, Offset 299a8: IMC 0 channel 1 -> rank 1
>          * Device 27, Offset 219a8: IMC 1 channel 0 -> rank 2
>          * Device 27, Offset 299a8: IMC 1 channel 1 -> rank 3
>          * Device 28, Offset 219a8: IMC 2 channel 0 -> rank 4
>          * Device 28, Offset 299a8: IMC 2 channel 1 -> rank 5
>          * Device 29, Offset 219a8: IMC 3 channel 0 -> rank 6
>          * Device 29, Offset 299a8: IMC 3 channel 1 -> rank 7
>          */
>         dev = 26 + chan_rank / 2;
>         offset = 0x219a8 + dimm_order * 4 + (chan_rank % 2) * 0x8000;
>
>         ret = peci_mmio_read(priv->peci_dev, 0, GET_CPU_SEG(reg_val), GET_CPU_BUS(reg_val),
>                              dev, 0, offset, data);
>         if (ret)
>                 return ret;
>
>         return 0;
> }
>
> Thanks
> -Iwona
>
> >  static const struct dimm_info dimm_hsx = {
> >         .chan_rank_max  = CHAN_RANK_MAX_ON_HSX,
> >         .dimm_idx_max   = DIMM_IDX_MAX_ON_HSX,
> > @@ -572,6 +583,13 @@ static const struct dimm_info dimm_icxd = {
> >         .read_thresholds = &read_thresholds_icx,
> >  };
> >
> > +static const struct dimm_info dimm_spr = {
> > +       .chan_rank_max  = CHAN_RANK_MAX_ON_SPR,
> > +       .dimm_idx_max   = DIMM_IDX_MAX_ON_SPR,
> > +       .min_peci_revision = 0x40,
> > +       .read_thresholds = &read_thresholds_spr,
> > +};
> > +
> >  static const struct auxiliary_device_id peci_dimmtemp_ids[] = {
> >         {
> >                 .name = "peci_cpu.dimmtemp.hsx",
> > @@ -597,6 +615,10 @@ static const struct auxiliary_device_id
> > peci_dimmtemp_ids[] = {
> >                 .name = "peci_cpu.dimmtemp.icxd",
> >                 .driver_data = (kernel_ulong_t)&dimm_icxd,
> >         },
> > +       {
> > +               .name = "peci_cpu.dimmtemp.spr",
> > +               .driver_data = (kernel_ulong_t)&dimm_spr,
> > +       },
> >         { }
> >  };
> >  MODULE_DEVICE_TABLE(auxiliary, peci_dimmtemp_ids);
>

Re: [PATCH v3 1/3] peci: cpu: Add Intel Sapphire Rapids support

[Winiarska, Iwona]

On Wed, 2023-07-19 at 20:41 +0200, Naresh Solanki wrote:
> Add support for detection of Intel Sapphire Rapids processor based on
> CPU family & model.
> 
> Sapphire Rapids Xeon processors with the family set to 6 and the
> model set to INTEL_FAM6_SAPPHIRERAPIDS_X. The data field for this entry
> is "spr".
> 
> Tested the patch series with AST2600 BMC with 4S Intel Sapphire Rapids
> processors & verified by reading cpu & dimm temperature.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>

Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>

Thanks
-Iwona

> ---
> Changes in V3:
> - Move spr entry at end of struct peci_cpu_device_ids
> - Mention test with the patch.
> Changes in V2:
> - Refactored from previous patchset as seperate patch based on subsystem.
> ---
>  drivers/peci/cpu.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/peci/cpu.c b/drivers/peci/cpu.c
> index de4a7b3e5966..bd990acd92b8 100644
> --- a/drivers/peci/cpu.c
> +++ b/drivers/peci/cpu.c
> @@ -323,6 +323,11 @@ static const struct peci_device_id peci_cpu_device_ids[]
> = {
>                 .model  = INTEL_FAM6_ICELAKE_D,
>                 .data   = "icxd",
>         },
> +       { /* Sapphire Rapids Xeon */
> +               .family = 6,
> +               .model  = INTEL_FAM6_SAPPHIRERAPIDS_X,
> +               .data   = "spr",
> +       },
>         { }
>  };
>  MODULE_DEVICE_TABLE(peci, peci_cpu_device_ids);
> 
> base-commit: 4dbbaf8fbdbd13adc80731b2452257857e4c2d8b