From: Douglas Anderson <dianders@chromium.org>
To: Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Sam Ravnborg <sam@ravnborg.org>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>
Cc: cros-qcom-dts-watchers@chromium.org,
Chris Morgan <macroalpha82@gmail.com>,
linux-input@vger.kernel.org, hsinyi@google.com,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
devicetree@vger.kernel.org, Daniel Vetter <daniel@ffwll.ch>,
yangcong5@huaqin.corp-partner.google.com,
Douglas Anderson <dianders@chromium.org>
Subject: [PATCH v3 00/10] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
Date: Tue, 25 Jul 2023 13:34:35 -0700 [thread overview]
Message-ID: <20230725203545.2260506-1-dianders@chromium.org> (raw)
The big motivation for this patch series is mostly described in the patch
("drm/panel: Add a way for other devices to follow panel state"), but to
quickly summarize here: for touchscreens that are connected to a panel we
need the ability to power sequence the two device together. This is not a
new need, but so far we've managed to get by through a combination of
inefficiency, added costs, or perhaps just a little bit of brokenness.
It's time to do better. This patch series allows us to do better.
Assuming that people think this patch series looks OK, we'll have to
figure out the right way to land it. The panel patches and i2c-hid
patches will go through very different trees and so either we'll need
an Ack from one side or the other or someone to create a tag for the
other tree to pull in. This will _probably_ require the true drm-misc
maintainers to get involved, not a lowly committer. ;-)
Version 3 of this patch was a long time coming after v2. Maxime and I
had a very long discussion trying to figure out if there was a beter
way and in the end we didn't find one so he was OK with the series in
general [1]. After that got resolved, I tried to resolve Benjamin's
feedback but got stuck [2]. Presumably Benjamin is busy at the moment,
so I've done my best to try to resolve things. The end result is a v3
that's not that different from v2 but that has a tiny bit more code
split out.
Version 2 of this patch series didn't change too much. At a high level:
* I added all the forgotten "static" to functions.
* I've hopefully made the bindings better.
* I've integrated into fw_devlink.
* I cleaned up a few descriptions / comments.
This still needs someone to say that the idea looks OK or to suggest
an alternative that solves the problems. ;-)
[1] https://lore.kernel.org/r/gkwymmfkdy2p2evz22wmbwgw42ii4wnvmvu64m3bghmj2jhv7x@4mbstjxnagxd
[2] https://lore.kernel.org/r/CAD=FV=VbdeomBGbWhppY+5TOSwt64GWBHga68OXFwsnO4gg4UA@mail.gmail.com
Changes in v3:
- Add is_panel_follower() as a convenience for clients.
- Add "depends on DRM || !DRM" to Kconfig to avoid randconfig error.
- Split more of the panel follower code out of the core.
Changes in v2:
- Move the description to the generic touchscreen.yaml.
- Update the desc to make it clearer it's only for integrated devices.
- Add even more text to the commit message.
- A few comment cleanups.
- ("Add a devlink for panel followers") new for v2.
- i2c_hid_core_initial_power_up() is now static.
- i2c_hid_core_panel_prepared() and ..._unpreparing() are now static.
- ihid_core_panel_prepare_work() is now static.
- Improve documentation for smp_wmb().
Douglas Anderson (10):
dt-bindings: HID: i2c-hid: Add "panel" property to i2c-hid backed
touchscreens
drm/panel: Check for already prepared/enabled in drm_panel
drm/panel: Add a way for other devices to follow panel state
of: property: fw_devlink: Add a devlink for panel followers
HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS()
HID: i2c-hid: Rearrange probe() to power things up later
HID: i2c-hid: Make suspend and resume into helper functions
HID: i2c-hid: Support being a panel follower
HID: i2c-hid: Do panel follower work on the system_wq
arm64: dts: qcom: sc7180: Link trogdor touchscreens to the panels
.../bindings/input/elan,ekth6915.yaml | 5 +
.../bindings/input/goodix,gt7375p.yaml | 5 +
.../bindings/input/hid-over-i2c.yaml | 2 +
.../input/touchscreen/touchscreen.yaml | 7 +
.../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 1 +
.../dts/qcom/sc7180-trogdor-homestar.dtsi | 1 +
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 1 +
.../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 1 +
.../qcom/sc7180-trogdor-quackingstick.dtsi | 1 +
.../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 1 +
drivers/gpu/drm/drm_panel.c | 218 ++++++++++-
drivers/hid/i2c-hid/Kconfig | 2 +
drivers/hid/i2c-hid/i2c-hid-core.c | 338 +++++++++++++-----
drivers/of/property.c | 2 +
include/drm/drm_panel.h | 94 +++++
15 files changed, 583 insertions(+), 96 deletions(-)
--
2.41.0.487.g6d72f3e995-goog
next reply other threads:[~2023-07-25 20:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-25 20:34 Douglas Anderson [this message]
2023-07-25 20:34 ` [PATCH v3 01/10] dt-bindings: HID: i2c-hid: Add "panel" property to i2c-hid backed touchscreens Douglas Anderson
2023-07-25 20:34 ` [PATCH v3 02/10] drm/panel: Check for already prepared/enabled in drm_panel Douglas Anderson
2023-07-26 12:41 ` Maxime Ripard
2023-07-26 15:10 ` Doug Anderson
2023-07-27 6:37 ` Maxime Ripard
2023-07-31 16:33 ` Chris Morgan
2023-07-31 17:03 ` Maxime Ripard
2023-08-02 17:25 ` Chris Morgan
2023-08-02 17:50 ` Dave Stevenson
2023-07-25 20:34 ` [PATCH v3 03/10] drm/panel: Add a way for other devices to follow panel state Douglas Anderson
2023-07-25 20:34 ` [PATCH v3 04/10] of: property: fw_devlink: Add a devlink for panel followers Douglas Anderson
2023-07-25 20:34 ` [PATCH v3 05/10] HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS() Douglas Anderson
2023-07-25 20:34 ` [PATCH v3 06/10] HID: i2c-hid: Rearrange probe() to power things up later Douglas Anderson
2023-07-25 20:34 ` [PATCH v3 07/10] HID: i2c-hid: Make suspend and resume into helper functions Douglas Anderson
2023-07-25 20:34 ` [PATCH v3 08/10] HID: i2c-hid: Support being a panel follower Douglas Anderson
2023-07-26 8:57 ` Benjamin Tissoires
2023-07-26 16:07 ` Doug Anderson
2023-07-26 16:45 ` Benjamin Tissoires
2023-07-25 20:34 ` [PATCH v3 09/10] HID: i2c-hid: Do panel follower work on the system_wq Douglas Anderson
2023-07-25 20:34 ` [PATCH v3 10/10] arm64: dts: qcom: sc7180: Link trogdor touchscreens to the panels Douglas Anderson
2023-07-26 12:45 ` [PATCH v3 00/10] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230725203545.2260506-1-dianders@chromium.org \
--to=dianders@chromium.org \
--cc=andersson@kernel.org \
--cc=benjamin.tissoires@redhat.com \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=frowand.list@gmail.com \
--cc=hsinyi@google.com \
--cc=jikos@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=macroalpha82@gmail.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
--cc=yangcong5@huaqin.corp-partner.google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox