From: Tinghan Shen <tinghan.shen@mediatek.com>
To: Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Tinghan Shen <tinghan.shen@mediatek.com>
Cc: <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v16 09/14] remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power control on dual-core SCP
Date: Fri, 28 Jul 2023 10:39:54 +0800 [thread overview]
Message-ID: <20230728023959.12293-10-tinghan.shen@mediatek.com> (raw)
In-Reply-To: <20230728023959.12293-1-tinghan.shen@mediatek.com>
Previously, SCP core 0 controlled the power of L2TCM and dictated that
SCP core 1 could only boot after SCP core 0. To address this constraint,
extracted the power control flow of L2TCM and made it shared
between both cores, enabling support for arbitrary boot order.
The flow for controlling L2TCM power has been incorporated into the
mt8195_scp_before_load() and mt8195_scp_stop() APIs, which are
respectively invoked during the rproc->ops->start() and
rproc->ops->stop() operations. These APIs effectively serve the same
purpose as the rproc prepare()/unprepare() APIs."
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
drivers/remoteproc/mtk_common.h | 3 ++
drivers/remoteproc/mtk_scp.c | 71 ++++++++++++++++++++++++++-------
2 files changed, 59 insertions(+), 15 deletions(-)
diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
index 1438159ae736..fea05bbba9aa 100644
--- a/drivers/remoteproc/mtk_common.h
+++ b/drivers/remoteproc/mtk_common.h
@@ -106,6 +106,9 @@ struct mtk_scp_of_cluster {
size_t l1tcm_size;
phys_addr_t l1tcm_phys;
struct list_head mtk_scp_list;
+ /* Prevent concurrent operations of this structure and L2TCM power control. */
+ struct mutex cluster_lock;
+ u32 l2tcm_refcnt;
};
struct mtk_scp {
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index d9242c3eb0d7..d0a44f82579e 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -454,19 +454,37 @@ static int mt8192_scp_before_load(struct mtk_scp *scp)
return 0;
}
-static int mt8195_scp_before_load(struct mtk_scp *scp)
+static int mt8195_scp_l2tcm_on(struct mtk_scp *scp)
{
- /* clear SPM interrupt, SCP2SPM_IPC_CLR */
- writel(0xff, scp->cluster->reg_base + MT8192_SCP2SPM_IPC_CLR);
+ struct mtk_scp_of_cluster *scp_cluster = scp->cluster;
+
+ mutex_lock(&scp_cluster->cluster_lock);
+
+ if (scp_cluster->l2tcm_refcnt == 0) {
+ /* clear SPM interrupt, SCP2SPM_IPC_CLR */
+ writel(0xff, scp->cluster->reg_base + MT8192_SCP2SPM_IPC_CLR);
+
+ /* Power on L2TCM */
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_L1TCM_SRAM_PDN,
+ MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS);
+ }
+
+ scp_cluster->l2tcm_refcnt += 1;
+ mutex_unlock(&scp_cluster->cluster_lock);
+
+ return 0;
+}
+
+static int mt8195_scp_before_load(struct mtk_scp *scp)
+{
writel(1, scp->cluster->reg_base + MT8192_CORE0_SW_RSTN_SET);
- /* enable SRAM clock */
- scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
- scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
- scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
- scp_sram_power_on(scp->cluster->reg_base + MT8192_L1TCM_SRAM_PDN,
- MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS);
+ mt8195_scp_l2tcm_on(scp);
+
scp_sram_power_on(scp->cluster->reg_base + MT8192_CPU0_SRAM_PD, 0);
/* enable MPU for all memory regions */
@@ -479,6 +497,8 @@ static int mt8195_scp_c1_before_load(struct mtk_scp *scp)
{
scp->data->scp_reset_assert(scp);
+ mt8195_scp_l2tcm_on(scp);
+
scp_sram_power_on(scp->cluster->reg_base + MT8195_CPU1_SRAM_PD, 0);
/* enable MPU for all memory regions */
@@ -645,14 +665,31 @@ static void mt8192_scp_stop(struct mtk_scp *scp)
writel(0, scp->cluster->reg_base + MT8192_CORE0_WDT_CFG);
}
+static void mt8195_scp_l2tcm_off(struct mtk_scp *scp)
+{
+ struct mtk_scp_of_cluster *scp_cluster = scp->cluster;
+
+ mutex_lock(&scp_cluster->cluster_lock);
+
+ if (scp_cluster->l2tcm_refcnt > 0)
+ scp_cluster->l2tcm_refcnt -= 1;
+
+ if (scp_cluster->l2tcm_refcnt == 0) {
+ /* Power off L2TCM */
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_L1TCM_SRAM_PDN,
+ MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS);
+ }
+
+ mutex_unlock(&scp_cluster->cluster_lock);
+}
+
static void mt8195_scp_stop(struct mtk_scp *scp)
{
- /* Disable SRAM clock */
- scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
- scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
- scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
- scp_sram_power_off(scp->cluster->reg_base + MT8192_L1TCM_SRAM_PDN,
- MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS);
+ mt8195_scp_l2tcm_off(scp);
+
scp_sram_power_off(scp->cluster->reg_base + MT8192_CPU0_SRAM_PD, 0);
/* Disable SCP watchdog */
@@ -661,6 +698,8 @@ static void mt8195_scp_stop(struct mtk_scp *scp)
static void mt8195_scp_c1_stop(struct mtk_scp *scp)
{
+ mt8195_scp_l2tcm_off(scp);
+
/* Power off CPU SRAM */
scp_sram_power_off(scp->cluster->reg_base + MT8195_CPU1_SRAM_PD, 0);
@@ -1103,6 +1142,7 @@ static int scp_probe(struct platform_device *pdev)
}
INIT_LIST_HEAD(&scp_cluster->mtk_scp_list);
+ mutex_init(&scp_cluster->cluster_lock);
ret = devm_of_platform_populate(dev);
if (ret)
@@ -1126,6 +1166,7 @@ static void scp_remove(struct platform_device *pdev)
rproc_del(scp->rproc);
scp_free(scp);
}
+ mutex_destroy(&scp_cluster->cluster_lock);
}
static const struct mtk_scp_of_data mt8183_of_data = {
--
2.18.0
next prev parent reply other threads:[~2023-07-28 2:41 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-28 2:39 [PATCH v16 00/14] Add support for MT8195 SCP 2nd core Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 01/14] dt-bindings: remoteproc: mediatek: Improve the rpmsg subnode definition Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 02/14] arm64: dts: mediatek: Update the node name of SCP rpmsg subnode Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 03/14] dt-bindings: remoteproc: mediatek: Support MT8195 dual-core SCP Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 04/14] remoteproc: mediatek: Add MT8195 SCP core 1 operations Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 05/14] remoteproc: mediatek: Extract SCP common registers Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 06/14] remoteproc: mediatek: Revise SCP rproc initialization flow for multi-core SCP Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 07/14] remoteproc: mediatek: Probe SCP cluster on single-core SCP Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 08/14] remoteproc: mediatek: Probe SCP cluster on multi-core SCP Tinghan Shen
2023-08-28 17:59 ` Mathieu Poirier
2023-08-30 2:36 ` TingHan Shen (沈廷翰)
2023-07-28 2:39 ` Tinghan Shen [this message]
2023-07-28 2:39 ` [PATCH v16 10/14] remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 11/14] remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 12/14] remoteproc: mediatek: Report watchdog crash to all cores Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 13/14] remoteproc: mediatek: Refine ipi handler error message Tinghan Shen
2023-07-28 2:39 ` [PATCH v16 14/14] arm64: dts: mediatek: mt8195: Add SCP 2nd core Tinghan Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230728023959.12293-10-tinghan.shen@mediatek.com \
--to=tinghan.shen@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=andersson@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox