From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PATCH v2 09/21] KVM: VMX: Recompute "XSAVES enabled" only after CPUID update
Date: Fri, 28 Jul 2023 18:15:56 -0700 [thread overview]
Message-ID: <20230729011608.1065019-10-seanjc@google.com> (raw)
In-Reply-To: <20230729011608.1065019-1-seanjc@google.com>
Recompute whether or not XSAVES is enabled for the guest only if the
guest's CPUID model changes instead of redoing the computation every time
KVM generates vmcs01's secondary execution controls. The boot_cpu_has()
and cpu_has_vmx_xsaves() checks should never change after KVM is loaded,
and if they do the kernel/KVM is hosed.
Opportunistically add a comment explaining _why_ XSAVES is effectively
exposed to the guest if and only if XSAVE is also exposed to the guest.
Practically speaking, no functional change intended (KVM will do fewer
computations, but should still get the see the same xsaves_enabled value
whenever KVM looks at it).
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/vmx/vmx.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index ca6194b0e35e..307d73749185 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -4587,19 +4587,10 @@ static u32 vmx_secondary_exec_control(struct vcpu_vmx *vmx)
if (!enable_pml || !atomic_read(&vcpu->kvm->nr_memslots_dirty_logging))
exec_control &= ~SECONDARY_EXEC_ENABLE_PML;
- if (cpu_has_vmx_xsaves()) {
- /* Exposing XSAVES only when XSAVE is exposed */
- bool xsaves_enabled =
- boot_cpu_has(X86_FEATURE_XSAVE) &&
- guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
- guest_cpuid_has(vcpu, X86_FEATURE_XSAVES);
-
- vcpu->arch.xsaves_enabled = xsaves_enabled;
-
+ if (cpu_has_vmx_xsaves())
vmx_adjust_secondary_exec_control(vmx, &exec_control,
SECONDARY_EXEC_XSAVES,
- xsaves_enabled, false);
- }
+ vcpu->arch.xsaves_enabled, false);
/*
* RDPID is also gated by ENABLE_RDTSCP, turn on the control if either
@@ -7722,8 +7713,15 @@ static void vmx_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
- /* xsaves_enabled is recomputed in vmx_compute_secondary_exec_control(). */
- vcpu->arch.xsaves_enabled = false;
+ /*
+ * XSAVES is effectively enabled if and only if XSAVE is also exposed
+ * to the guest. XSAVES depends on CR4.OSXSAVE, and CR4.OSXSAVE can be
+ * set if and only if XSAVE is supported.
+ */
+ vcpu->arch.xsaves_enabled = cpu_has_vmx_xsaves() &&
+ boot_cpu_has(X86_FEATURE_XSAVE) &&
+ guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
+ guest_cpuid_has(vcpu, X86_FEATURE_XSAVES);
vmx_setup_uret_msrs(vmx);
--
2.41.0.487.g6d72f3e995-goog
next prev parent reply other threads:[~2023-07-29 1:17 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-29 1:15 [PATCH v2 00/21] KVM: x86: Add "governed" X86_FEATURE framework Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 01/21] KVM: nSVM: Check instead of asserting on nested TSC scaling support Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 02/21] KVM: nSVM: Load L1's TSC multiplier based on L1 state, not L2 state Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 03/21] KVM: nSVM: Use the "outer" helper for writing multiplier to MSR_AMD64_TSC_RATIO Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 04/21] KVM: SVM: Clean up preemption toggling related " Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 05/21] KVM: x86: Always write vCPU's current TSC offset/ratio in vendor hooks Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 06/21] KVM: nSVM: Skip writes to MSR_AMD64_TSC_RATIO if guest state isn't loaded Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 07/21] KVM: x86: Add a framework for enabling KVM-governed x86 features Sean Christopherson
2023-08-14 4:43 ` Zeng Guang
2023-08-14 17:20 ` Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 08/21] KVM: x86/mmu: Use KVM-governed feature framework to track "GBPAGES enabled" Sean Christopherson
2023-07-29 1:15 ` Sean Christopherson [this message]
2023-07-29 1:15 ` [PATCH v2 10/21] KVM: VMX: Check KVM CPU caps, not just VMX MSR support, for XSAVE enabling Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 11/21] KVM: VMX: Rename XSAVES control to follow KVM's preferred "ENABLE_XYZ" Sean Christopherson
2023-07-29 1:15 ` [PATCH v2 12/21] KVM: x86: Use KVM-governed feature framework to track "XSAVES enabled" Sean Christopherson
2023-08-14 6:28 ` Zeng Guang
2023-07-29 1:16 ` [PATCH v2 13/21] KVM: nVMX: Use KVM-governed feature framework to track "nested VMX enabled" Sean Christopherson
2023-08-14 8:11 ` Yuan Yao
2023-07-29 1:16 ` [PATCH v2 14/21] KVM: nSVM: Use KVM-governed feature framework to track "NRIPS enabled" Sean Christopherson
2023-07-29 1:16 ` [PATCH v2 15/21] KVM: nSVM: Use KVM-governed feature framework to track "TSC scaling enabled" Sean Christopherson
2023-07-29 1:16 ` [PATCH v2 16/21] KVM: nSVM: Use KVM-governed feature framework to track "vVM{SAVE,LOAD} enabled" Sean Christopherson
2023-07-29 1:16 ` [PATCH v2 17/21] KVM: nSVM: Use KVM-governed feature framework to track "LBRv enabled" Sean Christopherson
2023-07-29 1:16 ` [PATCH v2 18/21] KVM: nSVM: Use KVM-governed feature framework to track "Pause Filter enabled" Sean Christopherson
2023-07-29 1:16 ` [PATCH v2 19/21] KVM: nSVM: Use KVM-governed feature framework to track "vGIF enabled" Sean Christopherson
2023-07-29 1:16 ` [PATCH v2 20/21] KVM: nSVM: Use KVM-governed feature framework to track "vNMI enabled" Sean Christopherson
2023-07-29 1:16 ` [PATCH v2 21/21] KVM: x86: Disallow guest CPUID lookups when IRQs are disabled Sean Christopherson
2023-08-04 0:40 ` [PATCH v2 00/21] KVM: x86: Add "governed" X86_FEATURE framework Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230729011608.1065019-10-seanjc@google.com \
--to=seanjc@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox