public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PATCH v2 20/21] KVM: nSVM: Use KVM-governed feature framework to track "vNMI enabled"
Date: Fri, 28 Jul 2023 18:16:07 -0700	[thread overview]
Message-ID: <20230729011608.1065019-21-seanjc@google.com> (raw)
In-Reply-To: <20230729011608.1065019-1-seanjc@google.com>

Track "virtual NMI exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.

Note, checking KVM's capabilities instead of the "vnmi" param means that
the code isn't strictly equivalent, as vnmi_enabled could have been set
if nested=false where as that the governed feature cannot.  But that's a
glorified nop as the feature/flag is consumed only by paths that are
gated by nSVM being enabled.

Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/governed_features.h | 1 +
 arch/x86/kvm/svm/svm.c           | 3 +--
 arch/x86/kvm/svm/svm.h           | 5 +----
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kvm/governed_features.h b/arch/x86/kvm/governed_features.h
index 368696c2e96b..423a73395c10 100644
--- a/arch/x86/kvm/governed_features.h
+++ b/arch/x86/kvm/governed_features.h
@@ -15,6 +15,7 @@ KVM_GOVERNED_X86_FEATURE(LBRV)
 KVM_GOVERNED_X86_FEATURE(PAUSEFILTER)
 KVM_GOVERNED_X86_FEATURE(PFTHRESHOLD)
 KVM_GOVERNED_X86_FEATURE(VGIF)
+KVM_GOVERNED_X86_FEATURE(VNMI)
 
 #undef KVM_GOVERNED_X86_FEATURE
 #undef KVM_GOVERNED_FEATURE
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 6d9bb4453f2d..89cc9f4f3ddc 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4236,8 +4236,7 @@ static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
 	kvm_governed_feature_check_and_set(vcpu, X86_FEATURE_PAUSEFILTER);
 	kvm_governed_feature_check_and_set(vcpu, X86_FEATURE_PFTHRESHOLD);
 	kvm_governed_feature_check_and_set(vcpu, X86_FEATURE_VGIF);
-
-	svm->vnmi_enabled = vnmi && guest_cpuid_has(vcpu, X86_FEATURE_VNMI);
+	kvm_governed_feature_check_and_set(vcpu, X86_FEATURE_VNMI);
 
 	svm_recalc_instruction_intercepts(vcpu, svm);
 
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 6eb5877cc6c3..06400cfe2244 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -259,9 +259,6 @@ struct vcpu_svm {
 	unsigned long soft_int_next_rip;
 	bool soft_int_injected;
 
-	/* optional nested SVM features that are enabled for this guest  */
-	bool vnmi_enabled                 : 1;
-
 	u32 ldr_reg;
 	u32 dfr_reg;
 	struct page *avic_backing_page;
@@ -537,7 +534,7 @@ static inline bool nested_npt_enabled(struct vcpu_svm *svm)
 
 static inline bool nested_vnmi_enabled(struct vcpu_svm *svm)
 {
-	return svm->vnmi_enabled &&
+	return guest_can_use(&svm->vcpu, X86_FEATURE_VNMI) &&
 	       (svm->nested.ctl.int_ctl & V_NMI_ENABLE_MASK);
 }
 
-- 
2.41.0.487.g6d72f3e995-goog


  parent reply	other threads:[~2023-07-29  1:18 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-29  1:15 [PATCH v2 00/21] KVM: x86: Add "governed" X86_FEATURE framework Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 01/21] KVM: nSVM: Check instead of asserting on nested TSC scaling support Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 02/21] KVM: nSVM: Load L1's TSC multiplier based on L1 state, not L2 state Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 03/21] KVM: nSVM: Use the "outer" helper for writing multiplier to MSR_AMD64_TSC_RATIO Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 04/21] KVM: SVM: Clean up preemption toggling related " Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 05/21] KVM: x86: Always write vCPU's current TSC offset/ratio in vendor hooks Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 06/21] KVM: nSVM: Skip writes to MSR_AMD64_TSC_RATIO if guest state isn't loaded Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 07/21] KVM: x86: Add a framework for enabling KVM-governed x86 features Sean Christopherson
2023-08-14  4:43   ` Zeng Guang
2023-08-14 17:20     ` Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 08/21] KVM: x86/mmu: Use KVM-governed feature framework to track "GBPAGES enabled" Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 09/21] KVM: VMX: Recompute "XSAVES enabled" only after CPUID update Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 10/21] KVM: VMX: Check KVM CPU caps, not just VMX MSR support, for XSAVE enabling Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 11/21] KVM: VMX: Rename XSAVES control to follow KVM's preferred "ENABLE_XYZ" Sean Christopherson
2023-07-29  1:15 ` [PATCH v2 12/21] KVM: x86: Use KVM-governed feature framework to track "XSAVES enabled" Sean Christopherson
2023-08-14  6:28   ` Zeng Guang
2023-07-29  1:16 ` [PATCH v2 13/21] KVM: nVMX: Use KVM-governed feature framework to track "nested VMX enabled" Sean Christopherson
2023-08-14  8:11   ` Yuan Yao
2023-07-29  1:16 ` [PATCH v2 14/21] KVM: nSVM: Use KVM-governed feature framework to track "NRIPS enabled" Sean Christopherson
2023-07-29  1:16 ` [PATCH v2 15/21] KVM: nSVM: Use KVM-governed feature framework to track "TSC scaling enabled" Sean Christopherson
2023-07-29  1:16 ` [PATCH v2 16/21] KVM: nSVM: Use KVM-governed feature framework to track "vVM{SAVE,LOAD} enabled" Sean Christopherson
2023-07-29  1:16 ` [PATCH v2 17/21] KVM: nSVM: Use KVM-governed feature framework to track "LBRv enabled" Sean Christopherson
2023-07-29  1:16 ` [PATCH v2 18/21] KVM: nSVM: Use KVM-governed feature framework to track "Pause Filter enabled" Sean Christopherson
2023-07-29  1:16 ` [PATCH v2 19/21] KVM: nSVM: Use KVM-governed feature framework to track "vGIF enabled" Sean Christopherson
2023-07-29  1:16 ` Sean Christopherson [this message]
2023-07-29  1:16 ` [PATCH v2 21/21] KVM: x86: Disallow guest CPUID lookups when IRQs are disabled Sean Christopherson
2023-08-04  0:40 ` [PATCH v2 00/21] KVM: x86: Add "governed" X86_FEATURE framework Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230729011608.1065019-21-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=vkuznets@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox