From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Tom Lendacky <thomas.lendacky@amd.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Arjan van de Ven <arjan@linux.intel.com>,
Huang Rui <ray.huang@amd.com>, Juergen Gross <jgross@suse.com>,
Dimitri Sivanich <dimitri.sivanich@hpe.com>,
Michael Kelley <mikelley@microsoft.com>,
Sohil Mehta <sohil.mehta@intel.com>,
K Prateek Nayak <kprateek.nayak@amd.com>,
Kan Liang <kan.liang@linux.intel.com>,
Zhang Rui <rui.zhang@intel.com>,
"Paul E. McKenney" <paulmck@kernel.org>,
Feng Tang <feng.tang@intel.com>,
Andy Shevchenko <andy@infradead.org>
Subject: [patch 20/53] x86/apic: Remove the pointless writeback of boot_cpu_physical_apicid
Date: Mon, 7 Aug 2023 15:53:04 +0200 (CEST) [thread overview]
Message-ID: <20230807135027.482353656@linutronix.de> (raw)
In-Reply-To: 20230807130108.853357011@linutronix.de
There is absolutely no point to write the APIC ID which was read from the
local APIC earlier, back into the local APIC for the 64-bit UP case.
Remove that along with the apic callback which is solely there for this
pointless exercise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/apic.h | 1 -
arch/x86/kernel/apic/apic.c | 3 ---
arch/x86/kernel/apic/apic_flat_64.c | 7 -------
arch/x86/kernel/apic/apic_numachip.c | 12 ------------
arch/x86/kernel/apic/bigsmp_32.c | 1 -
arch/x86/kernel/apic/local.h | 1 -
arch/x86/kernel/apic/x2apic_cluster.c | 1 -
arch/x86/kernel/apic/x2apic_phys.c | 6 ------
arch/x86/kernel/apic/x2apic_uv_x.c | 6 ------
arch/x86/xen/apic.c | 7 -------
10 files changed, 45 deletions(-)
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -296,7 +296,6 @@ struct apic {
u32 (*cpu_present_to_apicid)(int mps_cpu);
u32 (*get_apic_id)(u32 id);
- u32 (*set_apic_id)(u32 apicid);
/* wakeup_secondary_cpu */
int (*wakeup_secondary_cpu)(u32 apicid, unsigned long start_eip);
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2474,9 +2474,6 @@ EXPORT_SYMBOL_GPL(x86_msi_msg_get_destid
static void __init apic_bsp_up_setup(void)
{
-#ifdef CONFIG_X86_64
- apic_write(APIC_ID, apic->set_apic_id(boot_cpu_physical_apicid));
-#endif
reset_phys_cpu_present_map(boot_cpu_physical_apicid);
}
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -61,11 +61,6 @@ static u32 flat_get_apic_id(u32 x)
return (x >> 24) & 0xFF;
}
-static u32 set_apic_id(u32 id)
-{
- return (id & 0xFF) << 24;
-}
-
static int flat_probe(void)
{
return 1;
@@ -87,7 +82,6 @@ static struct apic apic_flat __ro_after_
.max_apic_id = 0xFE,
.get_apic_id = flat_get_apic_id,
- .set_apic_id = set_apic_id,
.calc_dest_apicid = apic_flat_calc_apicid,
@@ -156,7 +150,6 @@ static struct apic apic_physflat __ro_af
.max_apic_id = 0xFE,
.get_apic_id = flat_get_apic_id,
- .set_apic_id = set_apic_id,
.calc_dest_apicid = apic_default_calc_apicid,
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -38,11 +38,6 @@ static u32 numachip1_get_apic_id(u32 x)
return id;
}
-static u32 numachip1_set_apic_id(u32 id)
-{
- return (id & 0xff) << 24;
-}
-
static u32 numachip2_get_apic_id(u32 x)
{
u64 mcfg;
@@ -51,11 +46,6 @@ static u32 numachip2_get_apic_id(u32 x)
return ((mcfg >> (28 - 8)) & 0xfff00) | (x >> 24);
}
-static u32 numachip2_set_apic_id(u32 id)
-{
- return id << 24;
-}
-
static void numachip1_apic_icr_write(int apicid, unsigned int val)
{
write_lcsr(CSR_G3_EXT_IRQ_GEN, (apicid << 16) | val);
@@ -226,7 +216,6 @@ static const struct apic apic_numachip1
.max_apic_id = UINT_MAX,
.get_apic_id = numachip1_get_apic_id,
- .set_apic_id = numachip1_set_apic_id,
.calc_dest_apicid = apic_default_calc_apicid,
@@ -262,7 +251,6 @@ static const struct apic apic_numachip2
.max_apic_id = UINT_MAX,
.get_apic_id = numachip2_get_apic_id,
- .set_apic_id = numachip2_set_apic_id,
.calc_dest_apicid = apic_default_calc_apicid,
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -73,7 +73,6 @@ static struct apic apic_bigsmp __ro_afte
.max_apic_id = 0xFE,
.get_apic_id = bigsmp_get_apic_id,
- .set_apic_id = NULL,
.calc_dest_apicid = apic_default_calc_apicid,
--- a/arch/x86/kernel/apic/local.h
+++ b/arch/x86/kernel/apic/local.h
@@ -16,7 +16,6 @@
/* X2APIC */
void __x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest);
u32 x2apic_get_apic_id(u32 id);
-u32 x2apic_set_apic_id(u32 id);
void x2apic_send_IPI_all(int vector);
void x2apic_send_IPI_allbutself(int vector);
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -238,7 +238,6 @@ static struct apic apic_x2apic_cluster _
.max_apic_id = UINT_MAX,
.x2apic_set_max_apicid = true,
.get_apic_id = x2apic_get_apic_id,
- .set_apic_id = x2apic_set_apic_id,
.calc_dest_apicid = x2apic_calc_apicid,
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -129,11 +129,6 @@ u32 x2apic_get_apic_id(u32 id)
return id;
}
-u32 x2apic_set_apic_id(u32 id)
-{
- return id;
-}
-
static struct apic apic_x2apic_phys __ro_after_init = {
.name = "physical x2apic",
@@ -150,7 +145,6 @@ static struct apic apic_x2apic_phys __ro
.max_apic_id = UINT_MAX,
.x2apic_set_max_apicid = true,
.get_apic_id = x2apic_get_apic_id,
- .set_apic_id = x2apic_set_apic_id,
.calc_dest_apicid = apic_default_calc_apicid,
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -746,11 +746,6 @@ static void uv_send_IPI_all(int vector)
uv_send_IPI_mask(cpu_online_mask, vector);
}
-static u32 set_apic_id(u32 id)
-{
- return id;
-}
-
static int uv_probe(void)
{
return apic == &apic_x2apic_uv_x;
@@ -771,7 +766,6 @@ static struct apic apic_x2apic_uv_x __ro
.max_apic_id = UINT_MAX,
.get_apic_id = x2apic_get_apic_id,
- .set_apic_id = set_apic_id,
.calc_dest_apicid = apic_default_calc_apicid,
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -33,12 +33,6 @@ static unsigned int xen_io_apic_read(uns
return 0xfd;
}
-static u32 xen_set_apic_id(u32 x)
-{
- WARN_ON(1);
- return x;
-}
-
static u32 xen_get_apic_id(u32 x)
{
return ((x)>>24) & 0xFFu;
@@ -131,7 +125,6 @@ static struct apic xen_pv_apic __ro_afte
.max_apic_id = UINT_MAX,
.get_apic_id = xen_get_apic_id,
- .set_apic_id = xen_set_apic_id,
.calc_dest_apicid = apic_flat_calc_apicid,
next prev parent reply other threads:[~2023-08-07 13:54 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-07 13:52 [patch 00/53] x86/topology: The final installment Thomas Gleixner
2023-08-07 13:52 ` [patch 01/53] x86/cpu/topology: Cure off by one in fake_topology() Thomas Gleixner
2023-08-07 13:52 ` [patch 02/53] x86/cpu/topology: Make the APIC mismatch warnings complete Thomas Gleixner
2023-08-07 14:28 ` Arjan van de Ven
2023-08-07 14:54 ` Thomas Gleixner
2023-08-07 13:52 ` [patch 03/53] x86/platform/ce4100: Dont override x86_init.mpparse.setup_ioapic_ids Thomas Gleixner
2023-08-07 15:20 ` Andy Shevchenko
2023-08-07 13:52 ` [patch 04/53] x86/ioapic: Replace some more set bit nonsense Thomas Gleixner
2023-08-07 13:52 ` [patch 05/53] x86/apic: Get rid of get_physical_broadcast() Thomas Gleixner
2023-08-07 15:24 ` Andy Shevchenko
2023-08-07 13:52 ` [patch 06/53] x86/ioapic: Make io_apic_get_unique_id() simpler Thomas Gleixner
2023-08-07 13:52 ` [patch 07/53] x86/ioapic: Simplify setup_ioapic_ids_from_mpc_nocheck() Thomas Gleixner
2023-08-07 13:52 ` [patch 08/53] x86/apic: Remove check_apicid_used() and ioapic_phys_id_map() Thomas Gleixner
2023-08-07 13:52 ` [patch 09/53] x86/mpparse: Rename default_find_smp_config() Thomas Gleixner
2023-08-07 16:03 ` Andy Shevchenko
2023-08-07 17:21 ` Thomas Gleixner
2023-08-07 13:52 ` [patch 10/53] x86/mpparse: Provide separate early/late callbacks Thomas Gleixner
2023-08-07 13:52 ` [patch 11/53] x86/mpparse: Prepare for callback separation Thomas Gleixner
2023-08-07 13:52 ` [patch 12/53] x86/dtb: Rename x86_dtb_init() Thomas Gleixner
2023-08-07 13:52 ` [patch 13/53] x86/platform/ce4100: Prepare for separate mpparse callbacks Thomas Gleixner
2023-08-07 13:52 ` [patch 14/53] x86/platform/intel-mid: " Thomas Gleixner
2023-08-07 16:07 ` Andy Shevchenko
2023-08-07 13:52 ` [patch 15/53] x86/jailhouse: " Thomas Gleixner
2023-08-07 13:52 ` [patch 16/53] x86/xen/smp_pv: " Thomas Gleixner
2023-08-07 13:53 ` [patch 17/53] x86/mpparse: Switch to new init callbacks Thomas Gleixner
2023-08-07 13:53 ` [patch 18/53] x86/mm/numa: Move early mptable evaluation into common code Thomas Gleixner
2023-08-07 13:53 ` [patch 19/53] x86/mpparse: Remove the physid_t bitmap wrapper Thomas Gleixner
2023-08-08 11:37 ` Andy Shevchenko
2023-08-07 13:53 ` Thomas Gleixner [this message]
2023-08-07 13:53 ` [patch 21/53] x86/apic: Remove yet another dubious callback Thomas Gleixner
2023-08-07 13:53 ` [patch 22/53] x86/apic: Use a proper define for invalid ACPI CPU ID Thomas Gleixner
2023-08-07 13:53 ` [patch 23/53] x86/cpu/topology: Move registration out of APIC code Thomas Gleixner
2023-08-07 13:53 ` [patch 24/53] x86/cpu/topology: Provide separate APIC registration functions Thomas Gleixner
2023-08-11 12:32 ` Zhang, Rui
2023-08-07 13:53 ` [patch 25/53] x86/acpi: Use new " Thomas Gleixner
2023-08-07 15:27 ` Peter Zijlstra
2023-08-07 15:35 ` Andrew Cooper
2023-08-07 15:41 ` Thomas Gleixner
2023-08-07 13:53 ` [patch 26/53] x86/jailhouse: Use new APIC registration function Thomas Gleixner
2023-08-07 13:53 ` [patch 27/53] x86/of: Use new APIC registration functions Thomas Gleixner
2023-08-07 13:53 ` [patch 28/53] x86/mpparse: Use new APIC registration function Thomas Gleixner
2023-08-07 13:53 ` [patch 29/53] x86/acpi: Dont invoke topology_register_apic() for XEN PV Thomas Gleixner
2023-08-07 13:53 ` [patch 30/53] x86/xen/smp_pv: Register fake APICs Thomas Gleixner
2023-08-07 13:53 ` [patch 31/53] x86/cpu/topology: Confine topology information Thomas Gleixner
2023-08-07 13:53 ` [patch 32/53] x86/cpu/topology: Simplify APIC registration Thomas Gleixner
2023-08-07 13:53 ` [patch 33/53] x86/cpu/topology: Use a data structure for topology info Thomas Gleixner
2023-08-07 13:53 ` [patch 34/53] x86/smpboot: Make error message actually useful Thomas Gleixner
2023-08-07 13:53 ` [patch 35/53] x86/cpu/topology: Sanitize the APIC admission logic Thomas Gleixner
2023-08-07 13:53 ` [patch 36/53] x86/cpu/topology: Rework possible CPU management Thomas Gleixner
2023-08-14 8:29 ` Zhang, Rui
2023-08-07 13:53 ` [patch 37/53] x86/cpu: Detect real BSP on crash kernels Thomas Gleixner
2024-01-08 14:11 ` Zhang, Rui
2024-01-08 14:54 ` Thomas Gleixner
2024-01-08 16:13 ` Thomas Gleixner
2024-01-09 1:54 ` Zhang, Rui
2024-01-10 14:19 ` Thomas Gleixner
2024-01-10 15:14 ` Thomas Gleixner
2024-01-11 1:52 ` Zhang, Rui
2024-01-12 9:14 ` Zhang, Rui
2024-01-12 15:39 ` Thomas Gleixner
2024-01-13 7:35 ` Zhang, Rui
2024-01-15 9:41 ` Thomas Gleixner
2023-08-07 13:53 ` [patch 38/53] x86/topology: Add a mechanism to track topology via APIC IDs Thomas Gleixner
2023-08-07 13:53 ` [patch 39/53] x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug Thomas Gleixner
2023-08-07 13:53 ` [patch 40/53] x86/cpu/topology: Assign hotpluggable CPUIDs during init Thomas Gleixner
2023-08-07 13:53 ` [patch 41/53] x86/xen/smp_pv: Count number of vCPUs early Thomas Gleixner
2023-08-07 13:53 ` [patch 42/53] x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT Thomas Gleixner
2023-08-07 13:53 ` [patch 43/53] x86/cpu/topology: Use topology bitmaps for sizing Thomas Gleixner
2023-08-07 13:53 ` [patch 44/53] x86/cpu/topology: Mop up primary thread mask handling Thomas Gleixner
2023-08-07 13:53 ` [patch 45/53] x86/cpu/topology: Simplify cpu_mark_primary_thread() Thomas Gleixner
2023-08-07 13:53 ` [patch 46/53] x86/cpu/topology: Provide logical pkg/die mapping Thomas Gleixner
2023-08-07 13:53 ` [patch 47/53] x86/cpu/topology: Use topology logical mapping mechanism Thomas Gleixner
2023-08-07 13:53 ` [patch 48/53] x86/cpu/topology: Retrieve cores per package from topology bitmaps Thomas Gleixner
2023-08-07 13:53 ` [patch 49/53] x86: Use topology functions instead of smp_num_siblings where applicable Thomas Gleixner
2023-08-07 13:53 ` [patch 50/53] x86/cpu/topology: Rename smp_num_siblings Thomas Gleixner
2023-08-07 13:53 ` [patch 51/53] x86/cpu/topology: Rename topology_max_die_per_package() Thomas Gleixner
2023-08-07 13:53 ` [patch 52/53] x86/cpu/topology: Provide __num_[cores|threads]_per_package Thomas Gleixner
2023-08-07 13:53 ` [patch 53/53] x86/cpu/topology: Get rid of cpuinfo::x86_max_cores Thomas Gleixner
2023-08-11 15:44 ` Zhang, Rui
2023-12-14 14:00 ` Zhang, Rui
2023-08-08 7:40 ` [patch 00/53] x86/topology: The final installment Juergen Gross
2023-08-08 11:20 ` Andrew Cooper
2023-08-08 18:55 ` Thomas Gleixner
2023-08-08 18:29 ` Sohil Mehta
2023-08-08 19:10 ` Thomas Gleixner
2023-08-08 20:30 ` Sohil Mehta
2023-08-08 20:41 ` Thomas Gleixner
2023-08-08 22:10 ` Peter Zijlstra
2023-08-08 22:58 ` Sohil Mehta
2023-08-08 23:20 ` Thomas Gleixner
2023-08-09 16:55 ` Sohil Mehta
2023-08-10 3:28 ` Zhang, Rui
2023-08-09 16:50 ` Qiuxu Zhuo
2023-08-09 17:23 ` Sohil Mehta
2023-08-10 1:33 ` Zhuo, Qiuxu
2023-08-08 20:57 ` Thomas Gleixner
2023-08-09 16:12 ` Qiuxu Zhuo
2023-08-12 13:51 ` Michael Kelley (LINUX)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230807135027.482353656@linutronix.de \
--to=tglx@linutronix.de \
--cc=andrew.cooper3@citrix.com \
--cc=andy@infradead.org \
--cc=arjan@linux.intel.com \
--cc=dimitri.sivanich@hpe.com \
--cc=feng.tang@intel.com \
--cc=jgross@suse.com \
--cc=kan.liang@linux.intel.com \
--cc=kprateek.nayak@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=paulmck@kernel.org \
--cc=ray.huang@amd.com \
--cc=rui.zhang@intel.com \
--cc=sohil.mehta@intel.com \
--cc=thomas.lendacky@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox