Re: [PATCH 1/2] devicetree: bindings: Add keypad driver ducumentation

[Jonathan Cameron <Jonathan.Cameron@Huawei.com>]

On Tue, 8 Aug 2023 15:22:52 +0800
Wenhua Lin <Wenhua.Lin@unisoc.com> wrote:

> Add keypad driver ducumentation.

documentation

Though naming convention for dt-bindings patches does not look like
this. Take a look at what has been accepted as bindings recently.
Also you aren't going to get much review of this without cc'ing the
dt list and maintainers.

> 
> Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
> ---
>  .../bindings/input/sprd-keypad.yaml           | 76 +++++++++++++++++++
>  1 file changed, 76 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/sprd-keypad.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/sprd-keypad.yaml b/Documentation/devicetree/bindings/input/sprd-keypad.yaml
> new file mode 100644
> index 000000000000..51710e1eb389
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/sprd-keypad.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2023 Unisoc Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/sprd-keypad.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Device-Tree bindings for GPIO attached keys

Seems rather more specific than that!

> +
> +maintainers:
> +  - Orson Zhai <orsonzhai@gmail.com>
> +  - Baolin Wang <baolin.wang7@gmail.com>
> +  - Chunyan Zhang <zhang.lyra@gmail.com>
> +
> +description: |
> +    Keypad controller is used to interface a SoC with a matrix-keypad device.
> +    The keypad controller supports multiple row and column lines.
> +    A key can be placed at each intersection of a unique row and a unique column.
> +    The keypad controller can sense a key-press and key-release and report the
> +    event using a interrupt to the cpu.

CPU

> +
> +properties:
> +    compatible:
> +    const: sprd,sc9860-keypad

Make sure you follow the guidance on test building your binding and example.
See Documentation/devicetree/bindings/writing-bindings.rst and submitting-patches.rst

This has a lot of issues covered by that document.

> +
> +    reg:
> +        maxItems: 1
> +
> +    interrupts:
> +        maxItems: 1
> +
> +    keypad,num-rows:
> +    description: Number of row lines connected to the keypad controller.
> +
> +    keypad,num-columns:
> +    description: Number of column lines connected to the keypad.
> +
> +    debounce-interval:
> +    description:
> +        Debouncing interval time in milliseconds. If not specified defaults to 5.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +    default: 5
> +
> +    linux,keymap:
> +    description: An array of packed 1-cell entries containing the equivalent
> +        of row, column and linux key-code. The 32-bit big endian cell is packed.
> +
> +required:
> +        - compatible
> +        - reg
> +        - keypad,num-rows
> +        - keypad,num-columns
> +        - linux,keymap
> +
> +unevaluatedProperties: false
> +
> +
> +examples:
> +  - |
> +	keypad@40250000 {
> +		compatible = "sprd,sc9860-keypad";
> +		reg = 	<0x40250000 0x1000>;
> +		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&aonapb_gate CLK_KPD_EB>,
> +			<&aonapb_gate CLK_KPD_RTC_EB>;
> +		clock-names = "enable", "rtc";
> +		keypad,num-rows= <3>;
> +		keypad,num-columns = <3>;
> +		debounce-interval = <5>;
> +		linux,keymap = < 0x00000001
> +				 0x01000002
> +				 0x00020003>;
> +		status = "okay";

Status shouldn't be in an example.  Formatting wrong.
IF your binding example doesn't build (this won't) then it won't be accepted
by the dt-binding maintainers and their review is needed for it to be
merged.  

Jonathan


> +	};
> +...