[PATCH v1 3/6] iio: frequency: adf4377: Switch to device_property_match_property_string()

Andy Shevchenko
2023-08-08T17:59:02Z

Replace open coded device_property_match_property_string().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/iio/frequency/adf4377.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/frequency/adf4377.c b/drivers/iio/frequency/adf4377.c
index 26abecbd51e0..9284c13f1abb 100644
--- a/drivers/iio/frequency/adf4377.c
+++ b/drivers/iio/frequency/adf4377.c
@@ -870,7 +870,6 @@ static const struct iio_chan_spec adf4377_channels[] = {
static int adf4377_properties_parse(struct adf4377_state *st)
{
struct spi_device *spi = st->spi;
- const char *str;
int ret;

st->clkin = devm_clk_get_enabled(&spi->dev, "ref_in");
@@ -896,16 +895,13 @@ static int adf4377_properties_parse(struct adf4377_state *st)
return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk2),
"failed to get the CE GPIO\n");

- ret = device_property_read_string(&spi->dev, "adi,muxout-select", &str);
- if (ret) {
- st->muxout_select = ADF4377_MUXOUT_HIGH_Z;
- } else {
- ret = match_string(adf4377_muxout_modes, ARRAY_SIZE(adf4377_muxout_modes), str);
- if (ret < 0)
- return ret;
-
+ ret = device_property_match_property_string(&spi->dev, "adi,muxout-select",
+ adf4377_muxout_modes,
+ ARRAY_SIZE(adf4377_muxout_modes));
+ if (ret >= 0)
st->muxout_select = ret;
- }
+ else
+ st->muxout_select = ADF4377_MUXOUT_HIGH_Z;

return 0;
}
--
2.40.0.1.gaa8946217a0b