From: Asmaa Mnebhi <asmaa@nvidia.com>
To: <andy.shevchenko@gmail.com>, <linux-gpio@vger.kernel.org>,
<linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
<brgl@bgdev.pl>, <linux-kernel@vger.kernel.org>
Cc: Asmaa Mnebhi <asmaa@nvidia.com>
Subject: [PATCH v2 2/2] gpio: mlxbf3: Support add_pin_ranges()
Date: Wed, 16 Aug 2023 11:44:42 -0400 [thread overview]
Message-ID: <20230816154442.8417-3-asmaa@nvidia.com> (raw)
In-Reply-To: <20230816154442.8417-1-asmaa@nvidia.com>
Support add_pin_ranges() so that pinctrl_gpio_request() can be called.
The GPIO value is not modified when the user runs the "gpioset" tool.
This is because when gpiochip_generic_request is invoked by the gpio-mlxbf3
driver, "pin_ranges" is empty so it skips "pinctrl_gpio_request()".
pinctrl_gpio_request() is essential in the code flow because it changes the
mux value so that software has control over modifying the GPIO value.
Adding add_pin_ranges() creates a dependency on the pinctrl-mlxbf3.c driver.
Fixes: cd33f216d24 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
---
v1->v2:
- No changes.
drivers/gpio/gpio-mlxbf3.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c
index e30cee108986..d00cc61ea7b8 100644
--- a/drivers/gpio/gpio-mlxbf3.c
+++ b/drivers/gpio/gpio-mlxbf3.c
@@ -158,6 +158,19 @@ static const struct irq_chip gpio_mlxbf3_irqchip = {
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
+static int mlxbf3_gpio_add_pin_ranges(struct gpio_chip *chip)
+{
+ unsigned int id = 0;
+ int ret;
+
+ if (chip->ngpio % MLXBF3_GPIO_MAX_PINS_PER_BLOCK)
+ id = 1;
+
+ return gpiochip_add_pin_range(chip, "MLNXBF34:00",
+ chip->base, id * MLXBF3_GPIO_MAX_PINS_PER_BLOCK,
+ chip->ngpio);
+}
+
static int mlxbf3_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -197,6 +210,7 @@ static int mlxbf3_gpio_probe(struct platform_device *pdev)
gc->request = gpiochip_generic_request;
gc->free = gpiochip_generic_free;
gc->owner = THIS_MODULE;
+ gc->add_pin_ranges = mlxbf3_gpio_add_pin_ranges;
irq = platform_get_irq(pdev, 0);
if (irq >= 0) {
@@ -243,6 +257,7 @@ static struct platform_driver mlxbf3_gpio_driver = {
};
module_platform_driver(mlxbf3_gpio_driver);
+MODULE_SOFTDEP("pre: pinctrl-mlxbf3");
MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver");
MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>");
MODULE_LICENSE("Dual BSD/GPL");
--
2.30.1
next prev parent reply other threads:[~2023-08-16 15:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-16 15:44 [PATCH v2 0/2] Fix Nvidia BlueField-3 GPIO access Asmaa Mnebhi
2023-08-16 15:44 ` [PATCH v2 1/2] pinctrl: mlxbf3: Remove gpio_disable_free() Asmaa Mnebhi
2023-08-16 15:44 ` Asmaa Mnebhi [this message]
2023-08-16 15:49 ` [PATCH v2 2/2] gpio: mlxbf3: Support add_pin_ranges() Andy Shevchenko
2023-08-16 21:28 ` Asmaa Mnebhi
2023-08-17 8:21 ` Andy Shevchenko
2023-08-17 15:07 ` Asmaa Mnebhi
2023-08-17 1:55 ` kernel test robot
2023-08-17 11:00 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230816154442.8417-3-asmaa@nvidia.com \
--to=asmaa@nvidia.com \
--cc=andy.shevchenko@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=brgl@bgdev.pl \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox