From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<patches@opensource.cirrus.com>,
Maciej Strozek <mstrozek@opensource.cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>
Subject: [PATCH v2 1/2] ASoC: cs35l56: Read firmware uuid from a device property instead of _SUB
Date: Thu, 17 Aug 2023 12:27:11 +0100 [thread overview]
Message-ID: <20230817112712.16637-2-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20230817112712.16637-1-rf@opensource.cirrus.com>
From: Maciej Strozek <mstrozek@opensource.cirrus.com>
Use a device property "cirrus,firmware-uid" to get the unique firmware
identifier instead of using ACPI _SUB. There aren't any products that use
_SUB.
There will not usually be a _SUB in Soundwire nodes. The ACPI can use a
_DSD section for custom properties.
There is also a need to support instantiating this driver using software
nodes. This is for systems where the CS35L56 is a back-end device and the
ACPI refers only to the front-end audio device - there will not be any ACPI
references to CS35L56.
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
Changes since V1:
- Rebase to apply on v6.4 and v6.5
- Use devm_kstrdup() instead of kstrdup() and free()
To apply on v6.6 a 1-line change is needed:
static int cs35l56_get_firmware_uid(struct cs35l56_private *cs35l56)
{
- struct device *dev = cs35l56->dev;
+ struct device *dev = cs35l56->base.dev;
---
sound/soc/codecs/cs35l56.c | 31 ++++++++++++-------------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c
index c03f9d3c9a13..fd06b9f9d496 100644
--- a/sound/soc/codecs/cs35l56.c
+++ b/sound/soc/codecs/cs35l56.c
@@ -5,7 +5,6 @@
// Copyright (C) 2023 Cirrus Logic, Inc. and
// Cirrus Logic International Semiconductor Ltd.
-#include <linux/acpi.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
@@ -1354,26 +1353,22 @@ static int cs35l56_dsp_init(struct cs35l56_private *cs35l56)
return 0;
}
-static int cs35l56_acpi_get_name(struct cs35l56_private *cs35l56)
+static int cs35l56_get_firmware_uid(struct cs35l56_private *cs35l56)
{
- acpi_handle handle = ACPI_HANDLE(cs35l56->dev);
- const char *sub;
+ struct device *dev = cs35l56->dev;
+ const char *prop;
+ int ret;
- /* If there is no ACPI_HANDLE, there is no ACPI for this system, return 0 */
- if (!handle)
+ ret = device_property_read_string(dev, "cirrus,firmware-uid", &prop);
+ /* If bad sw node property, return 0 and fallback to legacy firmware path */
+ if (ret < 0)
return 0;
- sub = acpi_get_subsystem_id(handle);
- if (IS_ERR(sub)) {
- /* If bad ACPI, return 0 and fallback to legacy firmware path, otherwise fail */
- if (PTR_ERR(sub) == -ENODATA)
- return 0;
- else
- return PTR_ERR(sub);
- }
+ cs35l56->dsp.system_name = devm_kstrdup(dev, prop, GFP_KERNEL);
+ if (cs35l56->dsp.system_name == NULL)
+ return -ENOMEM;
- cs35l56->dsp.system_name = sub;
- dev_dbg(cs35l56->dev, "Subsystem ID: %s\n", cs35l56->dsp.system_name);
+ dev_dbg(dev, "Firmware UID: %s\n", cs35l56->dsp.system_name);
return 0;
}
@@ -1417,7 +1412,7 @@ int cs35l56_common_probe(struct cs35l56_private *cs35l56)
gpiod_set_value_cansleep(cs35l56->reset_gpio, 1);
}
- ret = cs35l56_acpi_get_name(cs35l56);
+ ret = cs35l56_get_firmware_uid(cs35l56);
if (ret != 0)
goto err;
@@ -1604,8 +1599,6 @@ void cs35l56_remove(struct cs35l56_private *cs35l56)
regcache_cache_only(cs35l56->regmap, true);
- kfree(cs35l56->dsp.system_name);
-
gpiod_set_value_cansleep(cs35l56->reset_gpio, 0);
regulator_bulk_disable(ARRAY_SIZE(cs35l56->supplies), cs35l56->supplies);
}
--
2.30.2
next prev parent reply other threads:[~2023-08-17 11:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-17 11:27 [PATCH v2 0/2] ASoC: cs35l56: Update ACPI HID and property Richard Fitzgerald
2023-08-17 11:27 ` Richard Fitzgerald [this message]
2023-08-17 11:27 ` [PATCH v2 2/2] ASoC: cs35l56: Add an ACPI match table Richard Fitzgerald
2023-08-17 22:36 ` [PATCH v2 0/2] ASoC: cs35l56: Update ACPI HID and property Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230817112712.16637-2-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mstrozek@opensource.cirrus.com \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox