Re: [PATCH] mfd: axp20x: Generalise handling without interrupts

[Lee Jones <lee@kernel.org>]

On Mon, 07 Aug 2023, Andre Przywara wrote:

> At the moment we allow the AXP15060 and the AXP806 PMICs to omit the
> interrupt line to the SoC, and we skip registering the PEK (power key)
> driver in this case, since that crashes when no IRQ is described in the
> DT node.
> The IRQ pin potentially not being connected to anything does affect more
> PMICs, though, and the PEK driver is not the only one requiring an
> interrupt: at least the AC power supply driver crashes in a similar
> fashion, for instance.
> 
> Generalise the handling of AXP MFD devices when the platform tables
> describe no interrupt, by putting devices requiring an IRQ *last* in
> the MFD cell array. We then can easily cut short the number of devices
> to be registered in this case.
> 
> This patch just enables that for three PMIC models for now: the two
> already handled, plus the AXP313a, for which we now have mulitple examples
> of boards without the IRQ pin connected.
> To stay consistent with the current behaviour, we still (try to) register
> all devices for the other PMICs, even though this will probably crash
> without an interrupt specified, if those problematic drivers are loaded.
> But this new approach can now easily be extended to other PMICs with more
> devices, should the need arise: currently all in-tree users are fine.
> 
> This fixes operation on the first boards using the AXP313a, which do not
> bother to connect the PMIC's IRQ pin.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> Reported-by: Shengyu Qu <wiagn233@outlook.com>
> ---
>  drivers/mfd/axp20x.c | 48 +++++++++++++++++---------------------------
>  1 file changed, 18 insertions(+), 30 deletions(-)

Relying on the ordering of static struct elements is fragile.

Please separate into new structs.

> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index c03bc5cda080a..c9623604bf6c1 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -1031,12 +1031,12 @@ static const struct mfd_cell axp803_cells[] = {
>  };
>  
>  static const struct mfd_cell axp806_self_working_cells[] = {
> +	{	.name		= "axp20x-regulator" },
>  	{
>  		.name		= "axp221-pek",
>  		.num_resources	= ARRAY_SIZE(axp806_pek_resources),
>  		.resources	= axp806_pek_resources,
>  	},
> -	{	.name		= "axp20x-regulator" },
>  };
>  
>  static const struct mfd_cell axp806_cells[] = {
> @@ -1090,19 +1090,11 @@ static const struct mfd_cell axp813_cells[] = {
>  };
>  
>  static const struct mfd_cell axp15060_cells[] = {
> +	{	.name		= "axp20x-regulator", },
>  	{
>  		.name		= "axp221-pek",
>  		.num_resources	= ARRAY_SIZE(axp15060_pek_resources),
>  		.resources	= axp15060_pek_resources,
> -	}, {
> -		.name		= "axp20x-regulator",
> -	},
> -};
> -
> -/* For boards that don't have IRQ line connected to SOC. */
> -static const struct mfd_cell axp_regulator_only_cells[] = {
> -	{
> -		.name		= "axp20x-regulator",
>  	},
>  };
>  
> @@ -1133,6 +1125,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
>  	struct device *dev = axp20x->dev;
>  	const struct acpi_device_id *acpi_id;
>  	const struct of_device_id *of_id;
> +	int nr_cells_no_irq = 0;
>  
>  	if (dev->of_node) {
>  		of_id = of_match_device(dev->driver->of_match_table, dev);
> @@ -1191,6 +1184,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
>  		break;
>  	case AXP313A_ID:
>  		axp20x->nr_cells = ARRAY_SIZE(axp313a_cells);
> +		nr_cells_no_irq = 1;
>  		axp20x->cells = axp313a_cells;
>  		axp20x->regmap_cfg = &axp313a_regmap_config;
>  		axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
> @@ -1207,14 +1201,14 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
>  		 * if there is no interrupt line.
>  		 */
>  		if (of_property_read_bool(axp20x->dev->of_node,
> -					  "x-powers,self-working-mode") &&
> -		    axp20x->irq > 0) {
> +					  "x-powers,self-working-mode")) {
>  			axp20x->nr_cells = ARRAY_SIZE(axp806_self_working_cells);
>  			axp20x->cells = axp806_self_working_cells;
>  		} else {
>  			axp20x->nr_cells = ARRAY_SIZE(axp806_cells);
>  			axp20x->cells = axp806_cells;
>  		}
> +		nr_cells_no_irq = 1;
>  		axp20x->regmap_cfg = &axp806_regmap_config;
>  		axp20x->regmap_irq_chip = &axp806_regmap_irq_chip;
>  		break;
> @@ -1238,24 +1232,9 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
>  		axp20x->regmap_irq_chip = &axp803_regmap_irq_chip;
>  		break;
>  	case AXP15060_ID:
> -		/*
> -		 * Don't register the power key part if there is no interrupt
> -		 * line.
> -		 *
> -		 * Since most use cases of AXP PMICs are Allwinner SOCs, board
> -		 * designers follow Allwinner's reference design and connects
> -		 * IRQ line to SOC, there's no need for those variants to deal
> -		 * with cases that IRQ isn't connected. However, AXP15660 is
> -		 * used by some other vendors' SOCs that didn't connect IRQ
> -		 * line, we need to deal with this case.
> -		 */
> -		if (axp20x->irq > 0) {
> -			axp20x->nr_cells = ARRAY_SIZE(axp15060_cells);
> -			axp20x->cells = axp15060_cells;
> -		} else {
> -			axp20x->nr_cells = ARRAY_SIZE(axp_regulator_only_cells);
> -			axp20x->cells = axp_regulator_only_cells;
> -		}
> +		axp20x->nr_cells = ARRAY_SIZE(axp15060_cells);
> +		nr_cells_no_irq = 1;
> +		axp20x->cells = axp15060_cells;
>  		axp20x->regmap_cfg = &axp15060_regmap_config;
>  		axp20x->regmap_irq_chip = &axp15060_regmap_irq_chip;
>  		break;
> @@ -1263,6 +1242,15 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
>  		dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
>  		return -EINVAL;
>  	}
> +
> +	/*
> +	 * Skip registering some MFD cells if there is no interrupt
> +	 * line, as IRQs might be required by some drivers.
> +	 * Those components must be the last in the cell array.
> +	 */
> +	if (axp20x->irq <= 0)
> +		axp20x->nr_cells -= nr_cells_no_irq;
> +
>  	dev_info(dev, "AXP20x variant %s found\n",
>  		 axp20x_model_names[axp20x->variant]);
>  
> -- 
> 2.25.1
> 

-- 
Lee Jones [李琼斯]