public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>,
	Navneet Singh <navneet.singh@intel.com>,
	Fan Ni <fan.ni@samsung.com>, Davidlohr Bueso <dave@stgolabs.net>,
	Dave Jiang <dave.jiang@intel.com>,
	Alison Schofield <alison.schofield@intel.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	<linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH RFC v2 15/18] cxl/mem: Trace Dynamic capacity Event Record
Date: Tue, 29 Aug 2023 17:46:35 +0100	[thread overview]
Message-ID: <20230829174635.00004371@Huawei.com> (raw)
In-Reply-To: <20230604-dcd-type2-upstream-v2-15-f740c47e7916@intel.com>

On Mon, 28 Aug 2023 22:21:06 -0700
ira.weiny@intel.com wrote:

> From: Navneet Singh <navneet.singh@intel.com>
> 
> CXL rev 3.0 section 8.2.9.2.1.5 defines the Dynamic Capacity Event Record
> Determine if the event read is a Dynamic capacity event record and
> if so trace the record for the debug purpose.
> 
> Add DC trace points to the trace log.

Probably should say why these might be useful...


> 
> Signed-off-by: Navneet Singh <navneet.singh@intel.com>
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>
> 
> ---
> [iweiny: fixups]
> ---
>  drivers/cxl/core/mbox.c  |  5 ++++
>  drivers/cxl/core/trace.h | 65 ++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 70 insertions(+)
> 
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 9d9c13e13ecf..9462c34aa1dc 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -939,6 +939,11 @@ static void cxl_event_trace_record(const struct cxl_memdev *cxlmd,
>  				(struct cxl_event_mem_module *)record;
>  
>  		trace_cxl_memory_module(cxlmd, type, rec);
> +	} else if (uuid_equal(id, &dc_event_uuid)) {
> +		struct dcd_event_dyn_cap *rec =
> +				(struct dcd_event_dyn_cap *)record;
> +
> +		trace_cxl_dynamic_capacity(cxlmd, type, rec);
>  	} else {
>  		/* For unknown record types print just the header */
>  		trace_cxl_generic_event(cxlmd, type, record);
> diff --git a/drivers/cxl/core/trace.h b/drivers/cxl/core/trace.h
> index a0b5819bc70b..1899c5cc96b9 100644
> --- a/drivers/cxl/core/trace.h
> +++ b/drivers/cxl/core/trace.h
> @@ -703,6 +703,71 @@ TRACE_EVENT(cxl_poison,
>  	)
>  );
>  
> +/*
> + * DYNAMIC CAPACITY Event Record - DER
> + *
> + * CXL rev 3.0 section 8.2.9.2.1.5 Table 8-47
> + */
> +
> +#define CXL_DC_ADD_CAPACITY			0x00
> +#define CXL_DC_REL_CAPACITY			0x01
> +#define CXL_DC_FORCED_REL_CAPACITY		0x02
> +#define CXL_DC_REG_CONF_UPDATED			0x03
> +#define show_dc_evt_type(type)	__print_symbolic(type,		\
> +	{ CXL_DC_ADD_CAPACITY,	"Add capacity"},		\
> +	{ CXL_DC_REL_CAPACITY,	"Release capacity"},		\
> +	{ CXL_DC_FORCED_REL_CAPACITY,	"Forced capacity release"},	\
> +	{ CXL_DC_REG_CONF_UPDATED,	"Region Configuration Updated"	} \
> +)
> +
> +TRACE_EVENT(cxl_dynamic_capacity,
> +
> +	TP_PROTO(const struct cxl_memdev *cxlmd, enum cxl_event_log_type log,
> +		 struct dcd_event_dyn_cap  *rec),
> +
> +	TP_ARGS(cxlmd, log, rec),
> +
> +	TP_STRUCT__entry(
> +		CXL_EVT_TP_entry
> +
> +		/* Dynamic capacity Event */
> +		__field(u8, event_type)
> +		__field(u16, hostid)
> +		__field(u8, region_id)
> +		__field(u64, dpa_start)
> +		__field(u64, length)
> +		__array(u8, tag, CXL_DC_EXTENT_TAG_LEN)
> +		__field(u16, sh_extent_seq)
> +	),
> +
> +	TP_fast_assign(
> +		CXL_EVT_TP_fast_assign(cxlmd, log, rec->hdr);
> +
> +		/* Dynamic_capacity Event */
> +		__entry->event_type = rec->data.event_type;
> +
> +		/* DCD event record data */
> +		__entry->hostid = le16_to_cpu(rec->data.host_id);
> +		__entry->region_id = rec->data.region_index;
> +		__entry->dpa_start = le64_to_cpu(rec->data.extent.start_dpa);
> +		__entry->length = le64_to_cpu(rec->data.extent.length);
> +		memcpy(__entry->tag, &rec->data.extent.tag, CXL_DC_EXTENT_TAG_LEN);
> +		__entry->sh_extent_seq = le16_to_cpu(rec->data.extent.shared_extn_seq);
> +	),
> +
> +	CXL_EVT_TP_printk("event_type='%s' host_id='%d' region_id='%d' " \
> +		"starting_dpa=%llx length=%llx tag=%s " \
> +		"shared_extent_sequence=%d",
> +		show_dc_evt_type(__entry->event_type),
> +		__entry->hostid,
> +		__entry->region_id,
> +		__entry->dpa_start,
> +		__entry->length,
> +		__print_hex(__entry->tag, CXL_DC_EXTENT_TAG_LEN),
> +		__entry->sh_extent_seq
> +	)
> +);
> +
>  #endif /* _CXL_EVENTS_H */
>  
>  #define TRACE_INCLUDE_FILE trace
> 


  reply	other threads:[~2023-08-29 16:47 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-29  5:20 [PATCH RFC v2 00/18] DCD: Add support for Dynamic Capacity Devices (DCD) Ira Weiny
2023-08-29  5:20 ` [PATCH RFC v2 01/18] cxl/hdm: Debug, use decoder name function Ira Weiny
2023-08-29 14:03   ` Jonathan Cameron
2023-08-29 21:48     ` Fan Ni
2023-09-03  2:55     ` Ira Weiny
2023-08-30 20:32   ` Dave Jiang
2023-08-29  5:20 ` [PATCH RFC v2 02/18] cxl/mbox: Flag support for Dynamic Capacity Devices (DCD) Ira Weiny
2023-08-29 14:07   ` Jonathan Cameron
2023-09-03  3:38     ` Ira Weiny
2023-08-29 21:49   ` Fan Ni
2023-08-30 20:33   ` Dave Jiang
2023-10-24 16:16   ` Jonathan Cameron
2023-08-29  5:20 ` [PATCH RFC v2 03/18] cxl/mem: Read Dynamic capacity configuration from the device ira.weiny
2023-08-29 14:37   ` Jonathan Cameron
2023-09-03 23:36     ` Ira Weiny
2023-08-30 21:01   ` Dave Jiang
2023-09-05  0:14     ` Ira Weiny
2023-09-08 20:23     ` Ira Weiny
2023-08-30 21:44   ` Fan Ni
2023-09-08 22:52     ` Ira Weiny
2023-09-12 21:32       ` Fan Ni
2023-09-07 15:46   ` Alison Schofield
2023-09-12  1:18     ` Ira Weiny
2023-09-08 12:46   ` Jørgen Hansen
2023-09-11 20:26     ` Ira Weiny
2023-08-29  5:20 ` [PATCH RFC v2 04/18] cxl/region: Add Dynamic Capacity decoder and region modes Ira Weiny
2023-08-29 14:39   ` Jonathan Cameron
2023-08-30 21:13   ` Dave Jiang
2023-08-31 17:00   ` Fan Ni
2023-08-29  5:20 ` [PATCH RFC v2 05/18] cxl/port: Add Dynamic Capacity mode support to endpoint decoders Ira Weiny
2023-08-29 14:49   ` Jonathan Cameron
2023-09-05  0:05     ` Ira Weiny
2023-08-31 17:25   ` Fan Ni
2023-09-08 23:26     ` Ira Weiny
2023-08-29  5:20 ` [PATCH RFC v2 06/18] cxl/port: Add Dynamic Capacity size " Ira Weiny
2023-08-29 15:09   ` Jonathan Cameron
2023-09-05  4:32     ` Ira Weiny
2023-08-29  5:20 ` [PATCH RFC v2 07/18] cxl/mem: Expose device dynamic capacity configuration ira.weiny
2023-08-29 15:14   ` Jonathan Cameron
2023-09-05 17:55     ` Fan Ni
2023-09-05 20:45     ` Ira Weiny
2023-08-30 22:46   ` Dave Jiang
2023-09-08 23:22     ` Ira Weiny
2023-08-29  5:20 ` [PATCH RFC v2 08/18] cxl/region: Add Dynamic Capacity CXL region support Ira Weiny
2023-08-29 15:19   ` Jonathan Cameron
2023-08-30 23:27   ` Dave Jiang
2023-09-06  4:36     ` Ira Weiny
2023-09-05 21:09   ` Fan Ni
2023-08-29  5:21 ` [PATCH RFC v2 09/18] cxl/mem: Read extents on memory device discovery Ira Weiny
2023-08-29 15:26   ` Jonathan Cameron
2023-08-30  0:16     ` Ira Weiny
2023-09-05 21:41     ` Ira Weiny
2023-08-29  5:21 ` [PATCH RFC v2 10/18] cxl/mem: Handle DCD add and release capacity events Ira Weiny
2023-08-29 15:59   ` Jonathan Cameron
2023-09-05 23:49     ` Ira Weiny
2023-08-31 17:28   ` Dave Jiang
2023-09-08 15:35     ` Ira Weiny
2023-08-29  5:21 ` [PATCH RFC v2 11/18] cxl/region: Expose DC extents on region driver load Ira Weiny
2023-08-29 16:20   ` Jonathan Cameron
2023-09-06  3:36     ` Ira Weiny
2023-08-31 18:38   ` Dave Jiang
2023-09-08 23:57     ` Ira Weiny
2023-08-29  5:21 ` [PATCH RFC v2 12/18] cxl/region: Notify regions of DC changes Ira Weiny
2023-08-29 16:40   ` Jonathan Cameron
2023-09-06  4:00     ` Ira Weiny
2023-09-18 13:56   ` Jørgen Hansen
2023-09-18 17:45     ` Ira Weiny
2023-08-29  5:21 ` [PATCH RFC v2 13/18] dax/bus: Factor out dev dax resize logic Ira Weiny
2023-08-30 11:27   ` Jonathan Cameron
2023-09-06  4:12     ` Ira Weiny
2023-08-31 21:48   ` Dave Jiang
2023-08-29  5:21 ` [PATCH RFC v2 14/18] dax/region: Support DAX device creation on dynamic DAX regions Ira Weiny
2023-08-30 11:50   ` Jonathan Cameron
2023-09-06  4:35     ` Ira Weiny
2023-09-12 16:49       ` Jonathan Cameron
2023-09-12 22:08         ` Ira Weiny
2023-09-12 22:35           ` Dan Williams
2023-09-13 17:30             ` Ira Weiny
2023-09-13 17:59               ` Dan Williams
2023-09-13 19:26                 ` Ira Weiny
2023-09-14 10:32                   ` Jonathan Cameron
2023-08-29  5:21 ` [PATCH RFC v2 15/18] cxl/mem: Trace Dynamic capacity Event Record ira.weiny
2023-08-29 16:46   ` Jonathan Cameron [this message]
2023-09-06  4:07     ` Ira Weiny
2023-08-29  5:21 ` [PATCH RFC v2 16/18] tools/testing/cxl: Make event logs dynamic Ira Weiny
2023-08-30 12:11   ` Jonathan Cameron
2023-09-06 21:15     ` Ira Weiny
2023-08-29  5:21 ` [PATCH RFC v2 17/18] tools/testing/cxl: Add DC Regions to mock mem data Ira Weiny
2023-08-30 12:20   ` Jonathan Cameron
2023-09-06 21:18     ` Ira Weiny
2023-08-31 23:19   ` Dave Jiang
2023-08-29  5:21 ` [PATCH RFC v2 18/18] tools/testing/cxl: Add Dynamic Capacity events Ira Weiny
2023-08-30 12:23   ` Jonathan Cameron
2023-09-06 21:39     ` Ira Weiny
2023-08-31 23:20   ` Dave Jiang
2023-09-07 21:01 ` [PATCH RFC v2 00/18] DCD: Add support for Dynamic Capacity Devices (DCD) Fan Ni
2023-09-12  1:44   ` Ira Weiny

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230829174635.00004371@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=fan.ni@samsung.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=navneet.singh@intel.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox