From: Alex Bee <knaerzche@gmail.com>
To: Kishon Vijay Abraham I <kishon@kernel.org>,
Vinod Koul <vkoul@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Alex Bee <knaerzche@gmail.com>
Subject: [PATCH v2 2/5] phy: phy-rockchip-inno-usb2: Add RK3128 support
Date: Wed, 30 Aug 2023 15:36:23 +0200 [thread overview]
Message-ID: <20230830133623.83075-6-knaerzche@gmail.com> (raw)
In-Reply-To: <20230830133623.83075-2-knaerzche@gmail.com>
Add registers to support the 2-port usb2 phy found in RK312x SoC familiy.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index a4a1716e67bd..9ea08be533cc 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1374,6 +1374,53 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
return ret;
}
+static const struct rockchip_usb2phy_cfg rk3128_phy_cfgs[] = {
+ {
+ .reg = 0x17c,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0190, 15, 15, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x017c, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x017c, 14, 14, 0, 1 },
+ .bvalid_det_st = { 0x017c, 15, 15, 0, 1 },
+ .bvalid_det_clr = { 0x017c, 15, 15, 0, 1 },
+ .idfall_det_en = { 0x01a0, 2, 2, 0, 1 },
+ .idfall_det_st = { 0x01a0, 3, 3, 0, 1 },
+ .idfall_det_clr = { 0x01a0, 3, 3, 0, 1 },
+ .idrise_det_en = { 0x01a0, 0, 0, 0, 1 },
+ .idrise_det_st = { 0x01a0, 1, 1, 0, 1 },
+ .idrise_det_clr = { 0x01a0, 1, 1, 0, 1 },
+ .ls_det_en = { 0x017c, 12, 12, 0, 1 },
+ .ls_det_st = { 0x017c, 13, 13, 0, 1 },
+ .ls_det_clr = { 0x017c, 13, 13, 0, 1 },
+ .utmi_bvalid = { 0x014c, 5, 5, 0, 1 },
+ .utmi_id = { 0x014c, 8, 8, 0, 1 },
+ .utmi_ls = { 0x014c, 7, 6, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0194, 8, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0194, 14, 14, 0, 1 },
+ .ls_det_st = { 0x0194, 15, 15, 0, 1 },
+ .ls_det_clr = { 0x0194, 15, 15, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x017c, 3, 0, 5, 1 },
+ .cp_det = { 0x02c0, 6, 6, 0, 1 },
+ .dcp_det = { 0x02c0, 5, 5, 0, 1 },
+ .dp_det = { 0x02c0, 7, 7, 0, 1 },
+ .idm_sink_en = { 0x0184, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0184, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0184, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0184, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0184, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0184, 11, 11, 0, 1 },
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
{
.reg = 0x760,
@@ -1749,6 +1796,7 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
+ { .compatible = "rockchip,rk3128-usb2phy", .data = &rk3128_phy_cfgs },
{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
{ .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
--
2.42.0
next prev parent reply other threads:[~2023-08-30 19:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-30 13:36 [PATCH v2 0/5] Add USB support for RK3128 Alex Bee
2023-08-30 13:36 ` [PATCH v2 1/5] phy: rockchip-inno-usb2: Split ID interrupt phy registers Alex Bee
2023-08-30 13:36 ` Alex Bee [this message]
2023-08-30 13:36 ` [PATCH v2 3/5] ARM: dts: rockchip: Add USB host clocks for RK3128 Alex Bee
2023-08-30 13:36 ` [PATCH v2 4/5] ARM: dts: rockchip: Add dwc2 otg fifo siztes " Alex Bee
2023-08-30 13:36 ` [PATCH v2 5/5] ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M " Alex Bee
2023-11-27 13:22 ` (subset) [PATCH v2 0/5] Add USB support " Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230830133623.83075-6-knaerzche@gmail.com \
--to=knaerzche@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox