From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Avraham Stern <avraham.stern@intel.com>,
Gregory Greenman <gregory.greenman@intel.com>,
Johannes Berg <johannes.berg@intel.com>,
Sasha Levin <sashal@kernel.org>,
kvalo@kernel.org, mukesh.sisodiya@intel.com,
linux-wireless@vger.kernel.org
Subject: [PATCH AUTOSEL 6.5 31/45] wifi: iwlwifi: pcie: avoid a warning in case prepare card failed
Date: Fri, 8 Sep 2023 14:13:12 -0400 [thread overview]
Message-ID: <20230908181327.3459042-31-sashal@kernel.org> (raw)
In-Reply-To: <20230908181327.3459042-1-sashal@kernel.org>
From: Avraham Stern <avraham.stern@intel.com>
[ Upstream commit 057381ddac0593c6e4ca8f58732830d8542b9c4e ]
In case CSME holds the NIC and SAP connection is already established,
iwl_pcie_prepare_card_hw() during iwl_pci_probe() will fail
(which is fine since CSME will release the nic later when asked with
a SAP message). In this case tring to grab nic access to read the
crf ids will fail with a warning.
Avoid the warning by only trying to read the crf ids in case prepare
card succeeded.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.9b026fa7b97e.I12bea7e6eef54eeeaf916b68d71583e92ff310fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 73c1fb3c0c5ec..bc83d2ba55c67 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -1132,12 +1132,6 @@ static int get_crf_id(struct iwl_trans *iwl_trans)
else
sd_reg_ver_addr = SD_REG_VER;
- if (!iwl_trans_grab_nic_access(iwl_trans)) {
- IWL_ERR(iwl_trans, "Failed to grab nic access before reading crf id\n");
- ret = -EIO;
- goto out;
- }
-
/* Enable access to peripheral registers */
val = iwl_read_umac_prph_no_grab(iwl_trans, WFPM_CTRL_REG);
val |= ENABLE_WFPM;
@@ -1157,9 +1151,6 @@ static int get_crf_id(struct iwl_trans *iwl_trans)
iwl_trans->hw_crf_id, iwl_trans->hw_cnv_id,
iwl_trans->hw_wfpm_id);
- iwl_trans_release_nic_access(iwl_trans);
-
-out:
return ret;
}
@@ -1351,6 +1342,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ret)
goto out_free_trans;
if (iwl_trans_grab_nic_access(iwl_trans)) {
+ get_crf_id(iwl_trans);
/* all good */
iwl_trans_release_nic_access(iwl_trans);
} else {
@@ -1360,7 +1352,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
iwl_trans->hw_rf_id = iwl_read32(iwl_trans, CSR_HW_RF_ID);
- get_crf_id(iwl_trans);
/*
* The RF_ID is set to zero in blank OTP so read version to
--
2.40.1
next prev parent reply other threads:[~2023-09-08 18:20 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-08 18:12 [PATCH AUTOSEL 6.5 01/45] spi: sun6i: add quirk for dual and quad SPI modes support Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 02/45] devlink: remove reload failed checks in params get/set callbacks Sasha Levin
2023-09-08 21:27 ` Jakub Kicinski
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 03/45] crypto: lrw,xts - Replace strlcpy with strscpy Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 04/45] regulator: max77857: Add ADI MAX77857/59/MAX77831 Regulator Support Sasha Levin
2023-09-08 23:16 ` Mark Brown
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 05/45] net: stmmac: use per-queue 64 bit statistics where necessary Sasha Levin
2023-09-13 14:43 ` Jisheng Zhang
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 06/45] ice: Don't tx before switchdev is fully configured Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 07/45] wifi: ath9k: fix fortify warnings Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 08/45] wifi: ath9k: fix printk specifier Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 09/45] wifi: rtw88: delete timer and free skb queue when unloading Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 10/45] wifi: mwifiex: fix fortify warning Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 11/45] mt76: mt7921: don't assume adequate headroom for SDIO headers Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 12/45] wifi: wil6210: fix fortify warnings Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 13/45] can: sun4i_can: Add acceptance register quirk Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 14/45] can: sun4i_can: Add support for the Allwinner D1 Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 15/45] net: Use sockaddr_storage for getsockopt(SO_PEERNAME) Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 16/45] wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan() Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 17/45] wifi: ath12k: avoid array overflow of hw mode for preferred_hw_mode Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 18/45] net/ipv4: return the real errno instead of -EINVAL Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 19/45] net: annotate data-races around sock->ops Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 20/45] crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui() Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 21/45] Bluetooth: btusb: Add device 0489:e0f5 as MT7922 device Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 22/45] Bluetooth: btusb: Add a new VID/PID 0489/e0f6 for MT7922 Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 23/45] Bluetooth: btusb: Add new VID/PID 0489/e102 " Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 24/45] Bluetooth: btusb: Add new VID/PID 04ca/3804 " Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 25/45] Bluetooth: Fix hci_suspend_sync crash Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 26/45] Bluetooth: btusb: Add support for another MediaTek 7922 VID/PID Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 27/45] netlink: convert nlk->flags to atomic flags Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 28/45] tpm_tis: Resend command to recover from data transfer errors Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 29/45] mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450 Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 30/45] alx: fix OOB-read compiler warning Sasha Levin
2023-09-08 18:13 ` Sasha Levin [this message]
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 32/45] wifi: mac80211: check S1G action frame size Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 33/45] netfilter: ebtables: fix fortify warnings in size_entry_mwt() Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 34/45] wifi: cfg80211: reject auth/assoc to AP with our address Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 35/45] wifi: cfg80211: ocb: don't leave if not joined Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 36/45] wifi: mac80211: check for station first in client probe Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 37/45] wifi: mac80211_hwsim: drop short frames Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 38/45] Revert "wifi: mac80211_hwsim: check the return value of nla_put_u32" Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 39/45] libbpf: Free btf_vmlinux when closing bpf_object Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 40/45] wifi: ath12k: Fix memory leak in rx_desc and tx_desc Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 41/45] Bluetooth: btusb: Fix quirks table naming Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 42/45] wifi: ath12k: add check max message length while scanning with extraie Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 43/45] Fix nomenclature for USB and PCI wireless devices Sasha Levin
2023-09-08 19:12 ` Alan Stern
2023-09-08 21:31 ` Greg Kroah-Hartman
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 44/45] bpf: Consider non-owning refs trusted Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 45/45] bpf: Consider non-owning refs to refcounted nodes RCU protected Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230908181327.3459042-31-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=avraham.stern@intel.com \
--cc=gregory.greenman@intel.com \
--cc=johannes.berg@intel.com \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mukesh.sisodiya@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox