[PATCH AUTOSEL 6.4 38/41] wifi: ath12k: add check max message length while scanning with extraie

[Sasha Levin <sashal@kernel.org>]

From: Wen Gong <quic_wgong@quicinc.com>

[ Upstream commit 2f5124e86ae74b7ba24c9ae2644107b750cbf38f ]

Currently the extraie length is directly used to allocate skb buffer. When
the length of skb is greater than the max message length which firmware
supports, error will happen in firmware side.

Hence add check for the skb length and drop extraie when overflow and
print a message.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230809081657.13858-1-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/wmi.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index cef01148fc163..6ae09779a68cc 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -2163,12 +2163,6 @@ int ath12k_wmi_send_scan_start_cmd(struct ath12k *ar,
 	if (arg->num_bssid)
 		len += sizeof(*bssid) * arg->num_bssid;
 
-	len += TLV_HDR_SIZE;
-	if (arg->extraie.len)
-		extraie_len_with_pad =
-			roundup(arg->extraie.len, sizeof(u32));
-	len += extraie_len_with_pad;
-
 	if (arg->num_hint_bssid)
 		len += TLV_HDR_SIZE +
 		       arg->num_hint_bssid * sizeof(*hint_bssid);
@@ -2177,6 +2171,18 @@ int ath12k_wmi_send_scan_start_cmd(struct ath12k *ar,
 		len += TLV_HDR_SIZE +
 		       arg->num_hint_s_ssid * sizeof(*s_ssid);
 
+	len += TLV_HDR_SIZE;
+	if (arg->extraie.len)
+		extraie_len_with_pad =
+			roundup(arg->extraie.len, sizeof(u32));
+	if (extraie_len_with_pad <= (wmi->wmi_ab->max_msg_len[ar->pdev_idx] - len)) {
+		len += extraie_len_with_pad;
+	} else {
+		ath12k_warn(ar->ab, "discard large size %d bytes extraie for scan start\n",
+			    arg->extraie.len);
+		extraie_len_with_pad = 0;
+	}
+
 	skb = ath12k_wmi_alloc_skb(wmi->wmi_ab, len);
 	if (!skb)
 		return -ENOMEM;
@@ -2266,7 +2272,7 @@ int ath12k_wmi_send_scan_start_cmd(struct ath12k *ar,
 	tlv->header = ath12k_wmi_tlv_hdr(WMI_TAG_ARRAY_BYTE, len);
 	ptr += TLV_HDR_SIZE;
 
-	if (arg->extraie.len)
+	if (extraie_len_with_pad)
 		memcpy(ptr, arg->extraie.ptr,
 		       arg->extraie.len);
 
-- 
2.40.1